Rapid automated method for on-site determination of sulfadiazine in fish farming: a stainless steel veterinary syringe coated with a selective membrane of PVC serving as a potentiometric detector in a flow-injection-analysis system

Sulfadiazine is an antibiotic of the sulfonamide group and is used as a veterinary drug in fish farming. Monitoring it in the tanks is fundamental to control the applied doses and avoid environmental dissemination. Pursuing this goal, we included a novel potentiometric design in a flow-injection assembly. The electrode body was a stainless steel needle veterinary syringe of 0.8-mm inner diameter. A selective membrane of PVC acted as a sensory surface. Its composition, the length of the electrode, and other flow variables were optimized. The best performance was obtained for sensors of 1.5-cm length and a membrane composition of 33% PVC, 66% o-nitrophenyloctyl ether, 1% ion exchanger, and a small amount of a cationic additive. It exhibited Nernstian slopes of 61.0 mV decade(-1) down to 1.0 × 10(-5) mol L(-1), with a limit of detection of 3.1 × 10(-6) mol L(-1) in flowing media. All necessary pH/ionic strength adjustments were performed online by merging the sample plug with a buffer carrier of 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, pH 4.9. The sensor exhibited the advantages of a fast response time (less than 15 s), long operational lifetime (60 days), and good selectivity for chloride, nitrite, acetate, tartrate, citrate, and ascorbate. The flow setup was successfully applied to the analysis of aquaculture waters. The analytical results were validated against those obtained with liquid chromatography-tandem mass spectrometry procedures. The sampling rate was about 84 samples per hour and recoveries ranged from 95.9 to 106.9%.     

Magnetite colloidal nanocrystals: a facile pathway to prepare mesoporous hematite thin films for photoelectrochemical water splitting

In this study, we demonstrate an alternative and promising way to produce hematite photoanodes with high performance and without the addition of doping or catalytic coating. In this approach, we processed hematite thin films using a colloidal dispersion of magnetite nanocrystals as the precursor. The photoelectrochemical characterization shows that the colloidal approach used to process an undoped hematite photoanode produced a high-performance electrode for water photooxidation with an onset potential as low as 0.8 V(RHE). This value is comparable to the best results reported in the literature for a hematite photoanode modified with catalytic materials. We demonstrate that pure hematite thin films reach 1.1 mA·cm(-2) at 1.23 V(RHE) with back-side illumination.     

Assessment of an unstructured exponential scheme discrete ordinates radiation model for non-gray media

For radiative transfer in complex geometries, Sakami and his co-workers have developed a discrete ordinates method (DOM) exponential scheme for unstructured meshes which was mainly applied to gray media. The present study investigates the application of the unstructured exponential scheme to a wider range of non-gray scenarios found in fire and combustion applications, with the goal to implement it in an in-house Computational Fluid Dynamics (CFD) code for fire simulations. The original unstructured gray exponential scheme is adapted to non-gray applications by employing a statistical narrow-band/correlated-k (SNB-CK) gas model and meshes generated using the authors’ own mesh generator. Different non-gray scenarios involving spectral gas absorption by H₂O and CO₂ are investigated and a comparative analysis is carried out between heat flux and radiative source terms predicted and literature data based on ray-tracing and Monte Carlo methods. The maximum discrepancies for total radiative heat flux do not typically exceed 5%.     

Fluidized and vibrofluidized shallow beds of fresh leaves

The fluid dynamics behavior of shallow fluidized and vibrofluidized beds operating with fresh leaves was investigated with the aim of exploring drying applications in a modified conveyor belt (MCB) system,which may be operated in a fixedor fluidized-bed mode.Leaves of the specimens Duranta repens,Schinus molle,Coleus barbatus,Buxus sempervirens,and Bougainvillea spectabilis were tested with a range of sphericities from 0.063 to 0.213,bulk densities from 0.038 to 0.251 g/cm 3,apparent densities from 0.52 to ...     

The smallest eigenvalue of the signless Laplacian

Recently the signless Laplacian matrix of graphs has been intensively investigated. While there are many results about the largest eigenvalue of the signless Laplacian, the properties of its smallest eigenvalue are less well studied. The present paper surveys the known results and presents some new ones about the smallest eigenvalue of the signless Laplacian.     

Positively charged lanthanide complexes with cyclen-based ligands: synthesis, solid-state and solution structure, and fluoride interaction

The syntheses of a new cyclen-based ligand L(2) containing four N-[2-(2-hydroxyethoxy)ethyl]acetamide pendant arms and of its lanthanide(III) complexes [LnL(2)(H(2)O)]Cl(3) (Ln = La, Eu, Tb, Yb, or Lu) are reported, together with a comparison with some Ln(III) complexes of a previously reported analogue L(1) in which two opposite amide arms have been replaced by coordinating pyridyl units. The structure and dynamics of the La(III), Lu(III), and Yb(III) complexes in solution were studied by using multinuclear NMR investigations and density functional theory calculations. Luminescence lifetime measurements in H(2)O and D(2)O solutions of the [Ln(L(2))(H(2)O)](3+) complexes (Ln = Eu or Tb) were used to investigate the number of H(2)O molecules coordinated to the metal ion, pointing to the presence of an inner-sphere H(2)O molecule in a buffered aqueous solution. Fluoride binding to the latter complexes was investigated using a combination of absorption spectroscopy and steady-state and time-resolved luminescence spectroscopy, pointing to a surprisingly weak interaction in the case of L(2) (log K = 1.4 ± 0.1). In contrast to the results in solution, the X-ray crystal structure of the lanthanide complex showed the ninth coordination position occupied by a chloride anion. In the case of L(1), the X-ray structure of the [(EuL(1))(2)F] complex features a bridging fluoride donor with an uncommon linear Eu-F-Eu entity connecting two almost identical [Eu(L(1))](3+) units. Encapsulation of the F(-) anion within the two complexes is assisted by π-π stacking between the pyridyl rings of two complexes and C-H···F hydrogen-bonding interactions involving the anion and the pyridyl units.     

Studying the interaction between triazines and humic substances--a new approach using open tubular capillary electrochromatography

The strength of the interaction between a pesticide and the soil organic matter is a key parameter to assess the risk of it reaching to groundwater with potentially harmful effects to human health. In this work, a new approach that allows measuring such interactions in a few minutes using a purified fraction of the soil organic matter (humic substances) is detailed. The strength of sorption is assessed via the normalised difference of elution (retention factor, k′) between the chemical of interest and a neutral marker transported via electroosmotic flow through an open tubular column supporting the immobilised humic substances (open tubular capillary electrochromatography). The immobilisation was achieved by incubating a capillary, pre-coated with a monolayer of humic acid, with an acidic solution of humic substances. This induces the formation of a supramolecular structure of humic substances as it occurs in soils. This aggregate can easily be removed using alkaline solutions, and a new structure assembled using other humic substances (HS) or different incubations conditions. The whole procedure takes 2 h. This approach has been tested using five triazines and three types of humic substances. The order of the strength of sorption of the triazines as expected from relevant literature and the relative standard deviation of k′ was between 1 and 6%. Good repeatability was also observed after long period of wash, between re-coating and repeating of the full coating with a new capillary.     

Adsorption of polycyclic aromatic hydrocarbons from aqueous solutions by modified periodic mesoporous organosilica

A novel procedure was developed for the synthesis of a periodic mesoporous organosilica (PMO), which was used to remove polycyclic aromatic hydrocarbons (PAHs) from aqueous solutions. Adsorption equilibrium isotherms and adsorption kinetics experiments were carried out in solutions of PAHs (2-60 mg L(-1)), using the PMO as adsorbent. Adsorption models were used to predict the mechanisms involved. The adsorption kinetics data best fitted the pseudo-first-order kinetic model for naphthalene, and to the pseudo-second-order model for fluorene, fluoranthene, pyrene, and acenaphtene. The intraparticle model was also tested and pointed to the occurrence of such processes in all cases. The isotherm models which best represented the data obtained were the Freundlich model for fluoranthene, pyrene, and fluorene, the Temkin model for naphthalene, and the Redlich-Peterson model for acenaphtene. PAHs showed similar behavior regarding kinetics after 24 h of contact between adsorbent and PAHs. FTIR, XRD, BET, and SEM techniques were used for the characterization of the adsorbent material.     

<Emphasis Type="SmallCaps">d</Emphasis>(−)-Lactic Acid Production by <Emphasis Type="Italic">Leuconostoc mesenteroides</Emphasis> B512 Using Different Carbon and Nitrogen Sources

Sugar concentration from sugarcane juice and yeast autolysate increased lactic acid production more than the other agro-industrial substrates tested. The concentrations of these two components were further optimized using the Plackett–Burman design and response surface method. A second-order polynomial regression model estimated that a maximal lactic acid production of 66.11 g/L would be obtained when the optimal values of sugar and yeast autolysate were 116.9 and 44.25 g/L, respectively. To validate the optimization of the medium composition, studies were carried out using the optimized conditions to confirm the result of the response surface analysis. After 48 h, lactic acid production using the shake-flask method was at 60.2 g/L.     

Mass Spectrometry and X-ray Diffraction Analysis of Two Crystal Types of Dioclea virgata Lectin: An Antinociceptive Protein Candidate to Structure/Function Analysis

The lectin from seeds of Dioclea virgata (DvirL) was purified in a single step affinity chromatography, sequenced by tandem mass spectrometry and submitted to crystallization and biological experiments. DvirL has a molecular mass of 25,412?±?2 Da and the chains β and γ has 12,817 Da?±?2 and 12,612 Da?±?2, respectively. Primary sequence determination was assigned by tandem mass spectrometry and revealed a protein with 237 amino acids and 87% of identify with ConA. The protein crystals were obtained native and complexed with X-Man using vapor-diffusion method at a constant temperature of 293 K. A complete X-ray dataset was collected at 1.8 ? resolution. DvirL crystals were found to be orthorhombic, belonging to the space group I222, with a unit cell parameters a?=?647.5 ?, b?=?86.6 ?, c?=?90.2 ?. Molecular replacement search found a solution with a correlation coefficient of 77.1% and an R(factor) of 44.6%. The present study also demonstrated that D. virgata lectin presents edematogenic and antinociceptive activities in rodents electing this protein as a candidate to structure/function analysis.