A comparative study for elastic electron collisions on the isoelectronic CNN, NCN, and CCO radicals

In this work, we present a theoretical study on elastic electron collisions from three isoelectronic free radicals (CNN, NCN, and CCO) in the low incident energy range. More specifically, calculated differential, integral, and momentum transfer cross sections are reported in the 1-30 eV energy range. Calculations are performed in the static-exchange and static-exchange-polarization levels. The iterative Schwinger variational method is used to solve the scattering equations. Our study reveals that the calculated cross sections for the three targets are significantly different at incident energies below 10 eV. Above that energy, a remarkable similarity among the calculated results is seen.     

Antiedematogenic activity of two thiazolidine derivatives: N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene) rhodanine (GS26) and N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene)-2,4-thiazolidinedione (GS28)

The search for new anti-inflammatory drugs has been constant in several research centers. The use of the Bioisostery concept allows the elaboration of new bioactive compounds with different properties through the introduction of substitute groups in one or more positions of a main molecule with known biological activity. Preliminary works accomplished at our laboratory with 2,4-thiazolidinedione isosters demonstrated inhibitory activity on edema formation for N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene)-2,4-thiazolidinedione (GS28) and N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene) rhodanine (GS26). We verified the antiedematogenic and ulcerogenic activity of these two compounds in Wistar rats. The carrageenan induced paw edema suffered significant (p<0.05) inhibition (28.36% on average) for GS28 (100 mg/kg; v.o.) during the entire time of the experiment. GS26 (50 and 100 mg/kg; v.o.) significantly inhibited (p<0.05) the paw edema dextran induced (22.1 and 27.8%, for the respective doses) after 180 min. The compounds GS26 and GS28 did not show ulcerogenic activity on gastric mucous. The results suggest antiedematogenic action for both compounds without the appearance of gastric lesions.     

Flow injection system with gas diffusion for the sequential determination of total nitrogen and phosphorus in vegetables

 A flow injection system was developed for the sequential determination of total nitrogen and phosphorus in digests of vegetables using potentiometric and spectrophotometric detection systems, respectively. A tubular ammonium selective electrode with a sensor system composed of nonactin/monactin in tris(2-ethylhexyl) phosphate was used. The selectivity limitations of this electrode were overcome by the inclusion of a gas-diffusion unit in the system that separated ammonium from the rest of the sample matrix and allowed the determination of total nitrogen and phosphorus by the partition of the sample plug between two streams. The results obtained with the developed FIA system were in good agreement with those of the reference methods. Sampling rates from 40 to 60 samples per hour and relative standard deviations below 3.5% were achieved. Received: 17 October 1996/Revised: 21 November 1996/Accepted: 27 November 1996     

Analysis of nickel-niobium alloys by inductively coupled plasma optical emission spectrometry

Inductively coupled plasma optical emission spectrometry (ICP-OES) was applied to the analysis of major and minor elements of Ni-Nb alloys obtained by aluminothermic reduction process. Digestion of samples was made using a mixture of HF+HNO₃. Minor and trace elements were determined without matrix separation. The precision for all constituents was <3%. Recoveries for the analyte-spiked samples were 95%.     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

Electrocatalytic activity of dispersed platinum and silver alloys and manganese oxides for the oxygen reduction in alkaline electrolyte

This work reviews the studies conducted in this laboratory of the oxygen reduction reaction (ORR) on electrocatalysts formed by Pt-M/C (M = V, Cr, Co) and Ag-Pt/C alloys and on different Mn oxides (MnO/C, Mn₃O₄/C, MnO₂/C) in KOH electrolyte. The physical and electronic properties of the materials are investigated by in situ XAS (x-ray absorption spectroscopy) in the XANES (x-ray absorption near edge structure) region. The electrocatalytic activity for the ORR on the different catalysts is compared through mass-transport-corrected Tafel plots. The XANES results for the Pt-M/C and Ag-Pt/C composites at high electrode potentials show lower vacancy of the Pt 5d band compared to pure Pt/C, while for the results indicate a chance of the Mn oxidation state as a function of the electrode potential. The electrochemical measurements evidence increased electrocatalytic activity of the Pt alloys compared to pure Pt and this is attributed to a lowering of the adsorption strength of adsorbed oxygen species caused by the reduced Pt reactivity. An activity enhancement of the Ag atoms on the Ag-Pt/C alloys compared to pure Ag is ascribed to an electronic effect induced by the presence of Pt, increasing the Ag-O adsorption strength. In the case of the Mn_yO_x/C materials, the electrochemical results show low activity for MnO/C and higher activity for MnO₂/C and Mn₃O₄/C. This is explained based on the activation for the ORR, which is higher for the material with higher MnO₂ contents and the occurrence of a mediation processes involving the reduction of Mn(IV) to Mn(III), followed by the electron transfer of Mn(III) to oxygen. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 12, pp. 1417–1426. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

Flow injection system with gas diffusion for the sequential determination of total nitrogen and phosphorus in vegetables

 A flow injection system was developed for the sequential determination of total nitrogen and phosphorus in digests of vegetables using potentiometric and spectrophotometric detection systems, respectively. A tubular ammonium selective electrode with a sensor system composed of nonactin/monactin in tris(2-ethylhexyl) phosphate was used. The selectivity limitations of this electrode were overcome by the inclusion of a gas-diffusion unit in the system that separated ammonium from the rest of the sample matrix and allowed the determination of total nitrogen and phosphorus by the partition of the sample plug between two streams. The results obtained with the developed FIA system were in good agreement with those of the reference methods. Sampling rates from 40 to 60 samples per hour and relative standard deviations below 3.5% were achieved. Received: 17 October 1996/Revised: 21 November 1996/Accepted: 27 November 1996     

Ion chromatographic determination of iodide in urine and serum using a tubular ion-selective electrode based on a homogeneous crystalline membrane

The use of a laboratory-made iodide ion-selective electrode with tubular configuration and based on a crystalline membrane (AgI/Ag₂S) as the detector for ion chromatographic determination of iodide in urine and serum is described. A CIS reversed-phase column was coated withN-cetylpyridinium chloride to prepare a low-exchange-capacity analytical column and with hexadecyltrimethylammonium bromide to prepare a concentrator pre-column. A 2.0 ml min^–1 flow rate of deionized water and 0.1 mol 1^–1 KNO₃ solution was used for the pre-concentration and for the chromatographic separation, respectively. For optimum performance of the detector a background level of iodide was added into the column effluent. A linear relationship (r = 0.9997) between tubular electrode potential (as peak height) and iodide concentration in the range 5–400 g 1^–1 and a detection limit of 1.47 g 1^–1 were obtained. The method shows good reproducibility for both peak height (2.2% RSD) and retention time (1.3% RSD). Recoveries on its application to the samples were 93.0–100.9% for urine and 91.4–106.0% for serum.     

Crystalline calcium phenylphosphonate—thermodynamic data on n-alkylmonoamine intercalations

Lamellar crystalline calcium phenylphosphonate, as anhydrous Ca(HO₃PC₆H₅)₂ and hydrated Ca(HO₃PC₆H₅)₂·2H₂O compounds, were used as hosts for intercalation of polar n-alkylmonoamine molecules of the general formula CH₃(CH₂)_nNH₂ (n=0–4, 7) in water or 1,2-dichloroethane. An increase in the interlayer distance was observed. The exothermic enthalpic values for intercalation increased with the number of carbon atoms and with increasing concentration of the amines. The intercalation followed by a titration procedure in the solid/liquid interface with Ca(HO₃PC₆H₅)₂·2H₂O and Ca(HO₃PC₆H₅)₂ gave the enthalpy/number of carbons correlations: Δ_intH=−(1.74±0.43)–(1.30±0.13)n_c and Δ_intH=−(4.15±0.15)–(1.07±0.03)n_c, for water and 1,2-dichloroethane, respectively. A similar correlation Δ_intH=−(4.27±0.80)–(1.85±0.21)n_c was obtained in water by using the ampoule breaking procedure for Ca(HO₃PC₆H₅)₂·2H₂O. The increase in exothermic enthalpic values with the increase in n-aliphatic carbon atoms is more pronounced for the anhydrous compound and also when using the ampoule breaking procedure. The Gibbs free energies are negative. Positive entropic values favor intercalation in these systems.