Highly Selective Targeting of Ovarian Cancer with the Photosensitizer PEG-m-THPC in a Rat Model

Photodynamic therapy (PDT) uses light to activate a photosensitizer that has been absorbed or retained preferentially by cancer cells after systemic administration. The first pegylated photosensitizer, tetrakis-(m-methoxypolyethylene glycol) derivative of 7,8-dihydro-5,10,15,20-tetrakis(3-hydroxyphenyl)-21,23-[H]-porphyrin (PEG-m-THPC), was evaluated to target selectively unresectable pelvic ovarian cancer bulks. Our goals were two-fold: (1) to establish an ovarian cancer model suitable for the development of debulking techniques and (2) to characterize the pharmacokinetics and tumor selectivity of PEG-m-THPC by fluorescence microscopy. NuTu-19 ovarian cancer cells were injected into the caudal part of the right psoas muscle of Fisher rats. Five weeks later, 30 mg/kg body weight of PEG-m-THPC was injected intravenously. Necropsy was performed between 4 and 10 days following drug application, and fluorescence of the tumor and various abdominal organs was measured. All rats developed bulky pelvic tumors with an average diameter of 2.6 cm (+/- 0.6 SD). Tumor masses were encompassing and infiltrating pelvic organs in a similar manner to ovarian cancers in humans. Fluorescence of cancer tissue was maximal 8-10 days following drug application. At 8 days, the tumor-to-tissue ratio was 40:1 (+/- 12 SE) for most abdominal organs. We conclude that this tumor model may be used for the study of new pelvic debulking techniques, and that the tumor selectivity of PEG-m-THPC is exceptionally high 8 days after drug application. Based on these data, we are currently developing a PDT-based minimally invasive debulking technique for advanced ovarian cancer.     

Strain effects in electron spin resonance spectroscopy of quintet 2,6-bis(4'-nitrenophenyl)-4-phenylpyridine

Photolysis of 2,6-bis(4'-azidophenyl)-4-phenylpyridine in 2-methyltetrahydrofuran (2MTHF) glass at 7 K leads to quintet 2,6-bis(4'-nitrenophenyl)-4-phenylpyridine as a mixture of rotational isomers. The electron spin resonance (ESR) spectrum of this mixture of rotamers shows a considerable broadening of many transitions in the range of 0-5000 G and cannot be reproduced by computer simulations solely based on the tuning of the spin Hamiltonian parameters g, D(Q), and E(Q) alone or on predictions of DFT calculations. The best modeling of the experimental ESR spectrum is obtained only when the large line-broadening parameter of Γ(E(Q)) = 1200 MHz along with the spin Hamiltonian g = 2.003, D(Q) = 0.154 cm(-1), and E(Q) = 0.050 cm(-1) is used in the spectral simulations. The most accurate theoretical estimations of the magnetic parameters of the dinitrene in a 2MTHF glass are obtained from the B3LYP/6-311+G(d,p)+PBE/DZ/COSMO calculations of the spin-spin coupling parameters D(SS) and E(SS). Such calculations overestimate the E(Q) and D(Q) values of the dinitrene just by 1% and 10%, respectively, demonstrating that contributions of the spin-orbit coupling parameters D(SOC) and E(SOC) to the total D(Q) and E(Q) values are negligibly small. The research shows that ESR studies of polynuclear high-spin nitrenes, obtained by photolysis of rotational isomers of the starting azides, can only be successful if large E(Q) strain effects are taken into account in the spectral simulations.     

Molecular design of ambipolar redox-active molecules II: closed-shell systems

This mini-review highlights key structural features that should be taken into account when creating ambipolar redox-active closed-shell metal-free molecules. This type of compound is strongly required for the fabrication of all-organic ‘poleless’ batteries and semiconductors. The suggested strategies aimed at stabilization of both oxidized (cationic) and reduced (anionic) redox-states are based on the comprehensive analysis of the most successful structures taken from the recent publications.     

Cycloruthenated Complexes from Imine‐Based Heterocycles: Synthesis,Characterization, and Reactivity toward Alkynes

Novel cycloruthenated complexes 2 a – c , 4 a – c , and 6 a, b based on heteroaromatic cores have been synthesized by reaction of a series of heterocycle‐based imines with [{RuCl(η⁶‐p‐cymene)}₂(μ? Cl)₂] and Cu(OAc)₂. This approach has proved efficient for the cyclometalation of thiophene, benzothiophene, furan, benzofuran, pyrrole, and indole derivatives. In addition, even a double cyclometalation process over the same heterocyclic ring is possible, yielding unprecedented bimetallic complexes. These ruthenacycles react with 3‐hexyne through an unexpected pathway, which involves the coupling of the original imino heterocycle and acetylene followed by dearomatization to afford fused hetero‐hydropyridyl ligands bonded to the {Ru(p‐cymene)} organometallic moiety (i.e., 7 a – c and 8 a – c ). These complexes represent, as far as we know, the first examples of this type of compound within the context of cyclometalation, and an exhaustive analysis of their structure was carried out in solution and solid state. Furthermore, these unique species react with CuCl₂, which promotes the rearomatization and the release of highly valuable aromatic fused bis‐heterocycles (i.e., 9 a – c , 10 a – c, 11 a , and 12 a/12 a′ ), providing a novel and appealing synthetic route to this extraordinary family of molecules.     

Direct electrochemistry of recombinant tobacco peroxidase on gold

Direct electron transfer (DET) reactions of recombinant tobacco peroxidase (rTOP), namely direct electroreduction of Compound I/Compound II and heme Fe^3+/2+ conversion, were studied on gold electrodes. rTOP of wild type, non-glycosylated, was produced using an Escherichia coli expression system. At pH 5.0, the redox potential for direct electrochemical transformation of the Fe^3+/2+ of the peroxidase heme was −143 mV vs. AgAgCl, and 0.26 ± 0.07 pmol of the adsorbed rTOP were in DET contact with the gold electrode. The total amount of the adsorbed rTOP estimated from QCM data was 53 ± 5 pmol/cm² or 1.67 pmol when referred to the surface area of the electrodes used for electrochemical measurements. Of 1.67 pmol of adsorbed rTOP, only 0.76 pmol were catalytically active. DET between Au and the enzyme was also studied in the reaction of the bioelectrocatalytic reduction of H₂O₂ by cyclic voltammetry and amperometric detection of H₂O₂ at +50 mV with rTOP-modified Au electrodes placed in a wall-jet flow-through electrochemical cell. Maximal bioelectrocatalytic current response of the rTOP-modified gold electrodes to H₂O₂ was observed at pH 5.0 and stemmed from its bioelectrocatalytic reduction based on DET between Au and the active site of rTOP. Kinetic analysis of the DET reactions gave 52% of the adsorbed rTOP molecules active in DET reactions (0.4 pmol of adsorbed catalytically active rTOP, correspondingly), which correlated well with the non-catalytic-voltammetry data. DET was characterised by a heterogeneous ET rate constant of 13.2 s⁻¹, if one takes into account the QCM data, and 19.6 s⁻¹, if the amount of rTOP estimated from the data on DET transformation of Fe^3+/2+ couple of rTOP is considered. The sensitivity for H₂O₂ obtained for the rTOP-modified Au electrodes was 0.7 ± 0.1 A M⁻¹ cm⁻². These are the first ever-reported data on DET reactions of anionic plant peroxidases on bare gold electrodes.     

Clustering versus percolation in the assembly of colloids coated with long DNA

We report an experimental study in which we compare the self-assembly of 1 mum colloids bridged through hybridization of complementary single-stranded DNA (ssDNA) strands (12 bp) attached to variable-length double-stranded DNA spacers that are grafted to the colloids. We considered three different spacer lengths: long spacers (48 500 bp), intermediate length spacers (7500 bp), and no spacers (in which case the ssDNA strands were directly grafted to the colloids). In all three cases, the same ssDNA pairs were used. However, confocal microscopy revealed that the aggregation behavior is very different. Upon cooling, the colloids coated with short and intermediate length DNAs undergo a phase transition to a dense amorphous phase that undergoes structural arrest shortly after percolation. In contrast, the colloids coated with the longest DNA systematically form finite-sized clusters. We speculate that the difference is due to the fact that very long DNA can easily be stretched by the amount needed to make only intracluster bonds, and in contrast, colloids coated with shorter DNA always contain free binding sites on the outside of a cluster. The grafting density of the DNA decreases strongly with increasing spacer length. This is reflected in a difference in the temperature dependence of the aggregates: for the two systems coated with long DNA, the resulting aggregates were stable against heating, whereas the colloids coated with ssDNA alone would dissociate upon heating.     

Synthesis of tetrazole containing 1,2,3-thiadiazole derivatives via U-4CR and their anti-TMV activity

A series of novel tetrazole containing 1,2,3-thiadiazole derivatives were designed and synthesized via Ugi reaction. Their structures were confirmed by melting points, IR, 1H NMR, and HRMS (ESI). Preliminary bioassay indicated that most target compounds exhibited very good direct anti-TMV activity at 100 μg/mL, which was equal to or higher than that of ribavirin. Among them, compounds 4b, 4c and 4i also showed equivalent protection effect to ribavirin in vivo at 100 μg/mL.