Low-temperature, solution processing of TiO2 thin films and fabrication of multilayer dielectric optical elements

High-quality TiO₂ thin films have been deposited from aqueous titanium-peroxo solutions via spin coating. The effects of precursor solution pH on the crystallization behavior, morphology, density, and refractive index of the films are reported. From X-ray diffraction measurements, the amorphous as-deposited films are found to crystallize in the anatase phase at 250 °C. Surface and cross-section SEM images reveal that films deposited from an acidic precursor are more uniform and denser than those deposited from a basic precursor. X-ray reflectivity measurements show that films with smooth surfaces and high densities (up to 87% of single-crystal anatase) can be produced at temperatures as low as 300 °C. Measured densities are consistent with high refractive indices at 633 nm of 2.24 and 2.11 for films derived from acidic and basic precursors, respectively. The uniformity and dense nature of the films have allowed fabrication of multilayer dielectric optical elements with thermal processing at only 300 °C. The distributed Bragg reflector with four bilayers exhibits a reflectance of 92% and a stop band width of 150 nm. The optical microcavity has a quality factor of 20. The optical properties of all elements agree well with theoretical models, indicating good optical quality. Use of the precursor chemistry for direct photopatterning of TiO₂ films without a polymer resist is also demonstrated.     

Modeling liquid crystal bilayer structures with minimal surfaces

This paper describes a new convenient and accurate method of calculating x-ray diffraction integrated intensities from detailed cubic bilayer structures. The method is employed to investigate the structure of a particular surfactant system (didodecyldimethylammonium bromide in a solution of oil and heavy water), for which single-crystal experimental data have recently been collected. The diffracted peak intensities correlate well with theoretical structures based on mathematical minimal surfaces. Optimized electron density profiles of the bilayer are presented, providing new insight into key features of the bilayer structure.     

Efficient transport of saccharides through a liquid membrane mediated by a cyclodextrin dimer

A new efficient system for transporting saccharides through a liquid membrane has been constructed. The transport rates of saccharides were accelerated greatly by the cyclodextrin dimer 2; by contrast, the corresponding cyclodextrin monomer 1 was not effective at mediating saccharide transport. The transport rate of D-ribose through a chloroform liquid membrane was 17 times faster when the cyclodextrin dimer 2 was used as the transporter than when the cyclodextrin monomer 1 was used. Similarly the transport rate of methyl D-galactopyranoside was 16 times faster by 2 than by 1.     

A simple route to derivatives of benzo[j]fluoranthene

3,6,8,11-Tetramethoxybenzo[j]fluoranthene can be made from 1,6-dimethoxynaphthalene in a one-pot ferric chloride oxidation/methanol reduction procedure. The reaction is tolerant of the presence of substituents in the 7-position of the naphthalene nucleus and provides a quick and easy route to these particular benzo[j]fluoranthenes. The reactions presumably proceed through initial formation of a bond between the 4-positions of two naphthalene molecules followed by closure of the five-membered ring. Indeed in one case some 4,4′-binaphthyl was isolated from the reaction mixture and it was generally found that better yields of the benzo[j]fluoranthrenes were obtained starting from the 4,4′-binaphthyl rather than by using the naphthalene as the starting material. In an analogous manner to the ring-closure of the 4,4′-binaphthyls, starting from a hexakisalkoxyphenylnaphthalene, a hexakisalkoxyfluoranthene could be obtained.     

Synthesis and complexing properties of bis-crown ethers incorporating benzo-15-crown-5 and metallocene

Bis-crown ethers in which the benzo-15-crown-5 units were linked to 1,1′-positions of metallocene (M = Fe or Ru) with amide, ester, or ? C? C? bonds were synthesized. Complexing ability of the compounds with alkali, alkali earth, and transition metal cations were measured by the solvent extraction method. The results showed that these crown ethers had high affinity toward alkali metal cations (Li⁺, Na⁺, K⁺, and Rb⁺) and heavy-metal cations (Ag⁺ and Tl⁺). The difference of complexing ability for metal cations between ferrocene and ruthenocene derivatives could not be detected significantly. The extractability of metallocene-bis-crown ethers for metal cations was more larger than that of the corresponding mono-crown ethers, and irregular increments of extractability were explained by assuming the existence of a mixture of 1:1 and 2:1 complexes.     

Synthesis, characterization, and ab initio theoretical study of a molecularly imprinted polymer selective for biosensor materials

Despite the complex phenomena involved in encoding template molecule information within stable synthetic polymers to yield selective and efficient molecular recognition processes, molecularly imprinted polymers (MIP) are increasingly finding broad areas of application. Molecular interactions, both during the polymerization of the functional monomers in the presence of the template and during the processes of specific recognition after template removal, are key determinants of an effective MIP. Covalent and noncovalent template imprinting have been employed to achieve specific recognition sites. In the present study, a molecularly imprinted biocompatible polymer, having a high capacity and affinity for the dye template, nickel(II) phthalocyanine tetrasulfonic acid, has been prepared. UV-visible spectroscopy, FTIR spectroscopy, and ICP analysis were used to investigate the aspects of the synthesis, binding capacity, and adsorption kinetics of the system. Poly(allylamine) cross-linked with epichlorohydrin has been used to represent an amino-functional receptor. Binding isotherms and capacities were correlated with the degree of template removal. Kinetic studies of binding allowed diffusion mechanisms to be evaluated for the fine particulate MIP. Ab initio molecular orbital calculations were performed using Hartree-Fock, MP2, and density functional theory methods to determine the most likely mechanisms of molecular imprinting. Suitable theoretical models have been constructed to mimic the interactions between the template molecule and the polymer. Simulation of the vibrational spectra was also undertaken to make meaningful assignments to experimentally determined spectral bands resulting from these template MIP receptor interactions.     

Cobalt oxide supported gold nanoparticles as a stable and readily-prepared precursor for the in situ generation of cobalt carbonyl like species

A treatment of cobalt oxide supported gold nanoparticles (Au/Co₃O₄) under syngas atmosphere effectively generated a cobalt carbonyl-like active species in the reaction vessel. The preparation of Au/Co₃O₄ was quite simple and the in situ generated cobalt species could be used as a stable and easy handling alternative for dicobalt octacarbonyl without bothersome purification prior to use. The reactions, which are sensitive to the purity of the dicobalt octacarbonyl, such as the alkoxycarbonylation of epoxides and the Pauson-Khand reaction, smoothly progressed with Au/Co₃O₄.     

Studies on regioselective acylation of cellulose with bulky acid chlorides

The regioselective esterification of cellulose by reaction with bulky acyl halides including pivaloyl chloride, adamantoyl chloride and 2,4,6-trimethylbenzoyl chloride was studied. Functionalization conditions to achieve a given degree of substitution (DS) and the resulting ester substitution pattern were described in detail. One- and two-dimensional NMR spectroscopy techniques were used to confirm the structure of the esters obtained. We compared the effects on substitution of using different esterifying reagents and solvent systems including DMAc/LiCl, DMSO/TBAF, and ionic liquids (ILs).     

Controlling interfacial curvature in nanoporous silica films formed by evaporation-induced self-assembly from nonionic surfactants. II. Effect of processing parameters on film structure

The double-gyroid phase of nanoporous silica films has been shown to possess facile mass-transport properties and may be used as a mold to fabricate a variety of highly ordered inverse double-gyroid metal and semiconductor films. This phase exists only over a very small region of the binary phase diagram for most surfactants, and it has been very difficult to synthesize metal oxide films with this structure by evaporation-induced self-assembly (EISA). Here, we show the interplay of the key parameters needed to synthesize these structures reproducibly and show that the interfacial curvature may be systematically controlled. Grazing angle of incidence small-angle X-ray scattering (GISAXS) is used to determine the structure and orientation of nanostructured silica films formed by EISA from dilute silica/(poly(ethylene oxide)-b-poly(propylene oxide)-b-alkyl) surfactant solutions. Four different highly ordered film structures are observed by changing only the concentration of the surfactant, the relative humidity during dip-coating, and the aging time of the solution prior to coating. The highly ordered films progress from rhombohedral (Rm) to 2D rectangular (c2m) to double-gyroid (distorted Iad) to lamellar systematically as interfacial curvature decreases. Under all experimental conditions investigated, increasing the aging time of the coating solution was found to decrease the interfacial curvature. In particular, this parameter was critical to being able to synthesize highly ordered, pure-phase double-gyroid films. The key role of the aging time is shown via processing diagrams that map out the interplay between the aging time, composition, and relative humidity. 29Si nuclear magnetic resonance (NMR) spectroscopy and solution-phase small-angle X-ray scattering (SAXS) of the aged coating solutions presented in part I of this series are then used to interpret the effects of aging prior to dip-coating. Specifically, it was found that a predictive model based on volume fractions and the silica cluster stoichiometry obtained from 29Si NMR qualitatively explains the trends observed with composition and aging. However, apart from the effects of relative humidity, a quantitative comparison of the predicted phase with the experimental processing diagram suggests that less-condensed silica clusters are more effective at swelling the EO blocks at early aging times. This enhanced swelling decreases with aging time and results in lower-curvature nanostructures such as the double-gyroid. The decrease in swelling is attributed to the decreased thermodynamic driving force for the more-condensed silica clusters to mix with the EO block of the surfactant.