Synthesis and Antimicrobial Activity of New Tetrazoles Incorporating Isoindole‐1,3‐dione Moiety and Their Sugar Derivatives

New tetrazole derivatives linked to isoindole‐1,3‐dione were prepared starting from the corresponding nitrile derivatives. The substituted hydrazides, their corresponding sugar hydrazones, and the derived acyclic C‐nucleoside analogs were also synthesized. The antimicrobial results indicated that most of the tested compounds exhibited moderate to high activity, whereas few compounds were found to exhibit little or no activity against the tested microorganisms.     

High pressure studies on the electrical resistivity of Ge–Te–Tl glasses

The variation of electrical resistivity in the system of glasses Ge₁₇Te_83?xTl_x, with (1≤x≤13), has been studied as a function of high pressure for pressures up to 10 GPa. It is found that the normalized electrical resistivity decreases continuously with the increase in pressure and shows a sudden drop at a particular pressure (transition pressure), indicating the presence of a transition from semiconductor to near-metallic at these pressures which are in the range 3.0–5.0 GPa. This transition pressure is seen to decrease with the increase in the percentage content of thallium due to increasing metallicity of the thallium. The transition is reversible under application of pressure and X-ray diffraction of samples recovered after pressurization show that they remain amorphous after undergoing a pressurization decompression cycle.     

Synthesis,biological evaluation,quantitative-SAR and docking studies of novel chalcone derivatives as antibacterial and antioxidant agents

In the present study, a series of chalcone derivatives including 17 new compounds were synthesised; their antibacterial activities against eleven bacteria, and their free radical-scavenging activities using DPPH were evaluated. All compounds showed significant antibacterial activities against both Gram-positive and Gram-negative bacteria. In particular, compound IIIf strongly inhibited Staphylococcus aureus (JMC 2151) and Enterococcus faecalis (CARS 2011-012) with MIC values of 6.25 µg mL^?1 and 12.5 µg mL^?1, respectively, which are comparable to that of the standard antibiotic, nalidixic acid. Compound IIIg also inhibited S. aureus with a MIC value similar to that of nalidixic acid (6.25 µg mL^?1). Furthermore, like nalidixic acid (MIC value of 25 µg mL^?1), compounds IIIa, IIIc and IIId inhibited Listeria monocytogenes (ATCC 43256) with MIC values of 25 µg mL^?1, 12.5 µg mL^?1 and 25 µg mL^?1, respectively. Quantitative structure-activity relationship (Q-SAR) studies using physicochemical calculations indicated that the antibacterial activities of chalcone derivatives correlated well with predicted physicochemical parameters (logP and PSA). Docking simulation by positioning the most active compound IIIf in the active site of the penicillin-binding protein (PBP-1b) of S. aureus was performed to explore the feasible binding mode. Furthermore, most of the compounds synthesised exhibited significant DPPH radical-scavenging activity, although compounds IIc and IIIc exhibited the greatest antioxidant activity with IC₅₀ values of 1.68 µM and 1.44 µM, respectively, comparable to that of the standard antioxidant, ascorbic acid (1.03 µM).     

Kinetics of hydrolysis of amino acid esters in the presence of aquocomplexes involving ethylenediamine,diethylenetriamine and triethylenetetramine ligands. Part 2. Cobalt(II), cobalt(III), platinum(II) and palladium(II)

Summary Aquocomplexes of cobalt(II), cobalt(III), palladium(II) and platinum(II) involving (H₂NCH₂)₂, [H₂N(CH₂)₂]₂NH and [H₂N(CH₂)₂NHCH₂]₂ as ligands were prepared and characterized. The kinetics of base hydrolysis of the amino acid esters H₂NCH₂CO₂Me·HCl, HOC₆H₄CH₂CH (NH₂)CO₂Me·HCl, MeS(CH₂)₂CH(NH₂)CO₂Me·HCl, HSCH₂CH(NH₂)CO₂Et·HCl, C₃H₃N₂CH₂CH(NH₂)-CO₂Me·2HCl and [—SCH₂CH(NH₂)CO₂Me]₂·2HCl in the presence of these complexes have been studied. The rate of hydrolysis is influenced substantially by these complexes and the second order rate constants are some 10–90 times greater than those obtained in the presence of simple metal ions.     

Measurement of glass transition temperature by mechanical (DMTA), thermal (DSC and MDSC), water diffusion and density methods: A comparison study

Glass transition measured by DMTA from the change in slope in storage modulus was 55 °C, which was 10.5 °C lower than the value measured by tan δ peak. Initial glass transition measured by DSC, increased exponentially and reached a constant value of 55 °C at or higher heating rate of 30 °C/min. Transition temperature, measured by MDSC, remained constant up to heating rate 15 °C/min and then decreased. The glass transition values determined from reversible heat flow was 60 °C. The break in diffusivity and density (i.e. volume) was observed at 50 °C below the glass transition temperature measured by thermal and mechanical methods.     

Synthesis, characterization, and photoinduced electron transfer in functionalized single wall carbon nanohorns

Single-wall carbon nanohorns (SWNHs) are a new class of material that is closely related to single-wall carbon nanotubes. Here, we describe the synthesis and characterization of a series of SWNHs functionalized with ethylene glycol chains and porphyrins. Functionalization of carbon nanohorns has been achieved using two different synthetic protocols: (1) direct attack of a free amino group on the nanohorn sidewalls (nucleophilic addition) and (2) amidation reaction of the carboxylic functions in oxidized nanohorns. The nanohorn derivatives have been characterized by a combination of several techniques, and the electronic properties of the porphyrin/nanohorn assemblies (SWNH/H2P) have been investigated by electrochemistry, spectroelectrochemistry, and a series of steady-state and time-resolved spectroscopy. The cyclic voltammetry curve of nanohorn/porphyrin conjugate 6 showed a continuum of faradic and pseudocapacitive behavior, which is associated with multiple-electron transfers to and from the SWNHs. Superimposed on such a pseudocapacitive current, the curve also displays three discrete reduction peaks at -2.26, -2.57, and -2.84 V and an oxidation peak at 1.12 V (all attributed to the porphyrin moiety). Steady-state and time-resolved fluorescence demonstrated a quenching of the fluorescence of the porphyrin in SWNH/H2P conjugates 5 and 6 compared to the reference free base porphyrin. Transient absorption spectra permitted the electron-transfer process between the porphyrins and the carbon nanostructures to be highlighted.     

Catalytic oxidation of thiols at preheated glassy carbon electrode modified with abrasive immobilization of multiwall carbon nanotubes: applications to amperometric detection of thiocytosine, l-cysteine and glutathione

The performance of preheated glassy carbon electrode modified with carbon nanotubes is described. First glassy carbon electrode is heated for 5 min at 50 °C, then abrasive immobilization of multiwall carbon nanotubes on a preheated glassy carbon electrode was achieved by gentle rubbing of electrode surface on a filter paper supporting carbon nanotubes. Carbon nanotubes (CNTs)-modified glassy carbon electrodes exhibit strong and stable electrocatalytic response toward thiols oxidation in wide pH range. These properties permit an important decrease in over voltage for the oxidation of thiocytosine, glutathione and l-cysteine, as well as a dramatic increase in the peak currents in comparison with bare glassy carbon electrode. Furthermore, the thiols amperometric response of the coated electrodes is extremely stable, with more than 95% of the initial activity after 30 min stirring of 0.1 mM thiols. The electrocatalytic behavior is further exploited as a sensitive detection scheme for thiols detection by hydrodynamic amperometry. The substantial decrease in the overvoltage of the thiols oxidation associated with a stable amperometric response and antifouling properties of nanotubes films allow the development of highly sensitive thiols sensor without using any redox mediator. Such ability of carbon nanotubes to promote the thiols electron transfer reaction, short response time (5 s) and long-term stability, low detection limit, extended linear concentration range, high sensitivity suggest great promise for thiols amperometric sensors and detector for chromatographic analysis of thiol derivatives.     

Synthesis of some new azole,azepine, pyridine,and pyrimidine derivatives using 6‐hydroxy‐4H‐4‐oxo[1]‐benzopyran‐3‐ carboxaldehyde as a versatile starting material

Condensation of 3‐formyl chromone 1 with hydroxylamine hydrochloride afforded the corresponding oxime 2 that was converted to nitrile 3 . Refluxing of oxime 2 and/or nitrile 3 with aceturic or hippuric acid gave 16 and 17 . Treatment of 1 with semicarbazide hydrochloride and thiosemicarbazide afforded the corresponding carbazones 5–6 that underwent cyclization with ethyl bromoacetate and/or chloroacetone yielding 7–8 . Also 1 reacted with acyclic active methylene reagents, e.g. malononitrile, ethyl cyanoacetate, and ethyl acetoacetate to form compounds 11, 12 , and 13 . Reaction of 1 with bifunctional reagents, e.g. benzil, o‐phenylenediamine, o‐aminophenol, and o‐aminothiophenol yielding the corresponding imidazolyl bezopyranone and azepine derivatives 14–20 . Condensation of 1 with acyclic or heterocyclic compounds containing active methylene group, e.g. hippuric acid forming the condensed products 21–27 . © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:20–27, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20048