Cobalt(II), nickel(II) and copper(II) complexes of syn-2-picolyl phenyl and syn-2-quinaldyl phenyl ketoximes

Summary The syn-2-picolyl phenyl ketoxime (HL₁) and the syn-2-quinaldyl phenyl ketoxime (HL₂) give [M(HL)LX], [M(HL)₂X₂] and [ML] solid complexes (M=Co, Ni and Cu; X=Cl^–, Br^– and NO ₃ ^– which have been characterized by elemental analysis, room temperature magnetic moments and electronic and i.r. spectral measurements.     

Application of rhodanine,fluorene and semicarbazide hydrochloride as new spectrophotometric reagents for quinones

New selective and sensitive Spectrophotometric methods for quinone determination are described. Quinone samples are treated with either methanolic solution of rhodanine, fluorene in ammoniacal media or aqueous semicarbazide hydrochloride solution. Semicarbazide is the most sensitive reagent for the determination of 1,4-benzoquinone, 1,4-naphthoquinone and 2-methyl-1,4-naphthoquinone. Quinones substituted with electron withdrawing groups are better determined using rhodanine. The average recovery is 99.1%, 98.7% and 99.2% using rhodanine, fluorene and semicarbazide as reagents, respectively.     

Conformational Stability from Variable-Temperature Infrared Spectra of Krypton Solutions, Ab Initio Calculations, and r o Structural Parameters of Chlorocyclopentane

The infrared spectra (3500–400 cm^–1) of krypton solutions of chlorocyclopentane, c-C₅H₉Cl, at variable temperatures (–101 to –150°C) have been recorded and the fundamental vibrations of the axial conformer and several of those for the equatorial form have been assigned. Utilizing two pairs of fundamentals for the two conformers in the krypton solution, an enthalpy difference of 145±15 cm^–1 (1.73±0.18 kJ-mol^–1) has been obtained with the axial conformer the more stable form. It is estimated that there is 67±2% of the axial conformer present at ambient temperature. Convincing spectroscopic evidence shows that a significant percentage of the chlorocyclopentane molecules are undergoing pseudorotation at ambient temperature. The conformational stabilities, harmonic force constants, fundamental frequencies, infrared intensities, and Raman activities have been obtained from MP2/6-31G(d) calculations with full electron correlation and these quantities have been compared to the experimental values when appropriate. The optimized geometries and conformational stabilities have also been obtained from ab initio MP2 calculations as well as by density functional theory (DFT) by the B3LYP method with several different basis sets. The adjusted r ₀ structural parameters have been obtained for both conformers by combining the ab initio data with the previously reported microwave rotational constants. These new values of the structural parameters for both conformers are compared to those previously reported from electron diffraction and microwave studies. These results are compared to the corresponding quantities of some similar molecules.     

Raman spectrum, conformational stability, barriers to internal rotations and DFT calculations of 1,1,1-trifluoro-propane-2-thione with double-internal-symmetric rotor

The Raman spectrum (3500-100 cm-1) of 1,1,1-trifluoro-propane-2-thione (TFPT), CF3C(S)CH3 of the solid phase has been recorded. The internal rotation of CH3 and/or CF3 moieties around CC bonds in TFPT allow five hypothetical conformers (Cs and C1 point groups). Aided by quantum chemical (QC) calculations, the Cc conformer is the only stable form (CF3 and CH3 groups are eclipsing the CS bond) which contains a planar FCC(S)CH backbone and possess intramolecular hydrogen sulfur interactions. However, other conformations (with the orientation of sulfur atom being trans to either hydrogen or fluorine atom) are either transition states or not fully converged geometry with "gauche" orientation. Moreover, the calculation were carried out at the level of Becke three Lee-Yan-Parr (B3LYP) parameters up to 6-311++G(d,p) basis sets. The torsional barriers are adequately described by a three-fold potential, V3 which have been determined utilizing the optimized structural parameters from the B3LYP/6-31G(d) basis set along with potential surface scan. Barriers of 1.28 kcal/mol (448 cm-1) and 1.94 kcal/mol (678 cm-1) were calculated for CH3 and CF3 symmetric rotors, respectively. Complete vibrational assignments have been reported for the stable Cc isomer which is supported by normal coordinate analysis and potential energy distributions (PEDs) for all fundamentals. Moreover, equilibrium geometries, vibrational frequencies are compared to the corresponding experimental values of acetone, 1,1,1-trifluoroacetone (TFA), hexafluoroacetone (HFA) and other molecules having the CF3 moiety whenever appropriate.     

Electrostatic layer-by-layer deposition of photoactive dendrimers with triviologen-like cores on their surfaces. Synthesis and electrochemical and photocurrent generation measurements

The stepwise assembly of Fréchet-type dendrimers with naphthalene peripheral groups and positively charged viologen-like cores on quartz and ITO surfaces utilizing the layer-by-layer approach was investigated. We were able to deposit only the (+6) charged dendrimers series on ITO. The number of assembled dendrimers was found to increase as we go to higher-generation dendrimers. This dendrimer generation effect was evident from the UV-vis and electrochemical measurements of the assembled dendrimers. The half-wave potentials (E1/2) of the dendrimers shift to less negative values as the dendrimer generation increases in acetonitrile and to more negative values when assembled on ITO. Anodic photocurrent generation was seen upon light irradiation of the second- and third-generation dendrimers, NB1V3+6 and NB2V3+6, assembled on ITO but not for the zero-generation one, NV3+6. This observation was attributed to a fast charge recombination process in NV3+6 when compared to that of NB1V3+6 and NB2V3+6 dendrimers.     

Nano-Structured Lipid Carrier-Based Oral Glutathione Formulation Mediates Renoprotection against Cyclophosphamide-Induced Nephrotoxicity,and Improves Oral Bioavailability of Glutathione Confirmed through RP-HPLC Micellar Liquid Chromatography

The study aimed to develop a new glutathione (GSH) oral formulation to enhance the delivery of GSH and counter the nephrotoxicity of the anticancer drug, cyclophosphamide (CP). A nanostructured lipid carrier glutathione formulation (GSH-NLCs) composed of glutathione (500 mg), stearic and oleic acid (300 mg, each), and Tween^® 80 (2%, w/v) was prepared through the emulsification-solvent-evaporation technique, which exhibited a 452.4 ± 33.19 nm spheroidal-sized particulate material with narrow particle size distributions, −38.5 ± 1.4 mV zeta potential, and an entrapment efficiency of 79.8 ± 1.9%. The GSH formulation was orally delivered, and biologically tested to ameliorate the CP-induced renal toxicity in a rat model. Detailed renal morphology, before and after the GSH-NLCs administration, including the histopathological examinations, confirmed the ameliorating effects of the prepared glutathione formulation together with its safe oral delivery. CP-induced oxidative stress, superoxide dismutase depletion, elevation of malondialdehyde levels, depletion of Bcl-2 concentration levels, and upregulated NF-KB levels were observed and were controlled within the recommended and near normal/control levels. Additionally, the inflammatory mediator marker, IL-1β, serum levels were marginally normalized by delivery of the GHS-NLCs formulation. Oral administration of the pure glutathione did not exhibit any ameliorating effects on the renal tissues, which suggested that the pure glutathione is reactive and is chemically transformed during the oral delivery, which affected its pharmacological action at the renal site. The protective effects of the GSH-NLCs formulation through its antioxidant and anti-inflammatory effects suggested its prominent role in containing CP-induced renal toxicity and renal tissue damage, together with the possibility of administrating higher doses of the anticancer drug, cyclophosphamide, to achieve higher and effective anticancer action in combination with the GSH-NLCs formulation.     

Synthesis,Antimicrobial, Anti-Virulence and Anticancer Evaluation of New 5(4H)-Oxazolone-Based Sulfonamides

Since the synthesis of prontosil the first prodrug shares their chemical moiety, sulfonamides exhibit diverse modes of actions to serve as antimicrobials, diuretics, antidiabetics, and other clinical applications. This inspiring chemical nucleus has promoted several research groups to investigate the synthesis of new members exploring new clinical applications. In this study, a novel series of 5(4H)-oxazolone-based-sulfonamides (OBS) 9a–k were synthesized, and their antibacterial and antifungal activities were evaluated against a wide range of Gram-positive and -negative bacteria and fungi. Most of the tested compounds exhibited promising antibacterial activity against both Gram-positive and -negative bacteria particularly OBS 9b and 9f. Meanwhile, compound 9h showed the most potent antifungal activity. Moreover, the OBS 9a, 9b, and 9f that inhibited the bacterial growth at the lowest concentrations were subjected to further evaluation for their anti-virulence activities against Pseudomonas aeruginosa and Staphylococcus aureus. Interestingly, the three tested compounds reduced the biofilm formation and diminished the production of virulence factors in both P. aeruginosa and S. aureus. Bacteria use a signaling system, quorum sensing (QS), to regulate their virulence. In this context, in silico study has been conducted to assess the ability of OBS to compete with the QS receptors. The tested OBS showed marked ability to bind and hinder QS receptors, indicating that anti-virulence activities of OBS could be due to blocking QS, the system that controls the bacterial virulence. Furthermore, anticancer activity has been further performed for such derivatives. The OBS compounds showed variable anti-tumor activities, specifically 9a, 9b, 9f and 9k, against different cancer lines. Conclusively, the OBS compounds can serve as antimicrobials, anti-virulence and anti-tumor agents.     

Synthesis and characterization of poly(urethane‐benzoxazine) films as novel type of polyurethane/phenolic resin composites

Poly(urethane‐benzoxazine) films as novel polyurethane ( PU )/phenolic resin composites were prepared by blending a benzoxazine monomer ( Ba ) and PU prepolymer that was synthesized from 2,4‐tolylene diisocyanate (TDI) and polyethylene adipate polyol (MW ca. 1000) in 2 : 1 molar ratio. DSC of PU/Ba blend showed an exotherm with maximum at ca. 246 °C due to the ring‐opening polymerization of Ba, giving phenolic OH functionalities that react with isocyanate groups in the PU prepolymer. The poly(urethane‐benzoxazine) films obtained by thermal cure were transparent, with color ranging from yellow to pale wine with increase of Ba content. All the films have only one glass transition temperature (T_g ) from viscoelastic measurements, indicating no phase separation in poly(urethane‐benzoxazine) due to in situ polymerization. The T_g increased with the increase of Ba content. The films containing 10 and 15% of Ba have characteristics of an elastomer, with elongation at break at 244 and 182%, respectively. These elastic films exhibit good resilience with excellent reinstating behavior. The films containing more than 20% of Ba have characteristics of plastics. The poly(urethane‐benzoxazine) films showed excellent resistance to the solvents such as tetrahydrofuran, N,N‐dimethyl formamide, and N‐methyl‐2‐pyrrolidinone that easily dissolve PU s. Thermal stability of PU was greatly enhanced even with the incorporation of a small amount of Ba . © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4165–4176, 2000     

CHARACTERIZATION OF EFFICIENT SOLUTIONS FOR MULTI-OBJECTIVE OPTIMIZATION PROBLEMS INVOLVING SEMI-STRONG AND GENERALIZED SEMI-STRONG E-CONVEXITY

The authors of this article are interested in characterization of efficient solutions for special classes of problems. These classes consider semi-strong E-convexity of involved functions. Sufficient and necessary conditions for a feasible solution to be an efficient or properly efficient solution are obtained.     

A note on substitutions in representable cylindric algebras

We show that it is impossible to define a substitution operator for arbitrary representable cylindric algebras that agrees in its basic properties with the notion of substitutions introduced for dimension complemented algebras (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)