Phase transformation of ZrO2 nanoparticles produced from zircon

This article focuses on the phase transformation of zirconia (ZrO₂) nanoparticles produced from zircon using a bottom-up approach. The influence of mechanical milling and thermal annealing on crystalline phase transformation of ZrO₂ nanoparticles was explored. It was found that the iron oxide, as an inherent impurity present in ZrO₂ nanoparticles, produced from zircon stabilises the cubic phase after calcination at 600°C. The stabilised cubic phase of ZrO₂ nanoparticles was disappeared and transformed into partial tetragonal and monoclinic phases after mechanical milling. The phase transformation occurred on account of the crystal defect induced by high-energy mechanical milling. The destabilisation of cubic phase into monoclinic phase was observed after the thermal annealing of ZrO₂ nanoparticles at 1000°C. The phase transitions observed are correlated to the exclusion of iron oxide from the zirconia crystal structure.     

Growth and luminescence properties of large‐scale zinc oxide nanotetrapods

Large‐scale zinc oxide (ZnO) nanotetrapods have been grown on p‐type Si (111) substrate by oxidizing zinc pieces in air by thermal evaporation technique without the presence of any catalyst. The size and morphology of the nanostructures was found to depend on experimental parameters. The grown nanostructures were characterized by X‐ray Diffraction (XRD), Photoluminescence (PL), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), High Resolution TEM (HRTEM) and analysis of elemental composition was done by Energy Dispersive X‐ray analysis (EDX). The EDX spectrum shows that the grown product contains Zn and O only. The X‐ray diffraction pattern indicates that the microstructure of the obtained products is typical hexagonal wurtzite ZnO. The optical properties were studied using room temperature PL spectroscopy which indicates that the products are of high optical quality and the near band edge UV transition peak intensity increases with decrease in tetrapod size. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Transition-Metal-Free Heterocyclic Carbon-Boron Bond Formation

Heteroaryl boronic acids and esters are extremely important and valuable intermediates because of their wide application in the synthesis of marketed drugs and bioactive compounds. Over the last couple of decades, the construction of highly important heteroaryl carbon-boron bonds has created huge attention. The transition-metal-free protocols are more green, less sensitive to air and moisture, and also economically advantageous over the transition-metal-based protocols. The transition-metal-free C−H borylation of heteroarenes and C−X (X=halogen) borylation of heteroaryl halides represents an excellent approach for their synthesis. Also, various cyclization and alkyne activation protocols have been recently established for their synthesis. The goal of this review article is to summarize the existing literature and the current state of the art for transition-metal-free synthesis of heteroaryl boronic acid and esters.     

Synthesis,X-ray crystal structure,DFT calculations,spectroscopic characterization and redox behaviour of a rhodium(III) complex of an anthracene–pyridylhydrazone ligand

Transition Metal Chemistry - A pyridylhydrazone incorporating an anthracene moiety, designated as HLAnc, has been synthesized in order to examine its coordination behaviour towards rhodium(III)....     

Oligonucleotide-Based Approaches to Inhibit Dengue Virus Replication

Dengue fever is one of the most common viral infections affecting humans. It is an expanding public health problem, particularly in tropical and subtropical regions. No effective vaccine or antiviral therapies against Dengue virus (DENV) infection are available. Therefore, there is a strong need to develop safe and effective therapeutic strategies that can reduce the burden and duration of hospitalizations due to this life-threatening disease. Oligonucleotide-based strategies are considered as an attractive means of inhibiting viral replication since oligonucleotides can be designed to interact with any viral RNA, provided its sequence is known. The resultant targeted destruction of viral RNA interferes with viral replication without inducing any adverse effects on cellular processes. In this review, we elaborate the ribozymes, RNA interference, CRISPR, aptamer and morpholino strategies for the inhibition of DENV replication and discuss the challenges involved in utilizing such approaches.     

Nonlinear finite element analysis of laminated composite spherical shell vibration under uniform thermal loading

In this article, nonlinear free vibration behavior of laminated composite shallow shell under uniform temperature load is investigated. The mid-plane kinematics of the laminated shell is evaluated based on higher order shear deformation theory to count the out of plane shear stresses and strains accurately. The nonlinearity in geometry is taken in Green-Lagrange sense due to the thermal load. In addition to that, all the nonlinear higher order terms are taken in the mathematical model to capture the original flexure of laminated panel. A nonlinear finite element model is proposed to discretise the developed model and the governing equations are derived using Hamilton’s principle. The sets of governing equations are solved using a direct iterative method. In order to validate the model, the results are compared with the available published literature and the limitations of the existing models have been discussed. Finally, some numerical experimentation has been done using the developed nonlinear model for different parameters (thickness ratio, curvature ratio, modular ratio, support condition, lamination scheme, amplitude ratio and thermal expansion coefficient) and their effects on the responses are discussed in detail.     

Validation of primary formaldehyde gas standards prepared by dynamic thermogravimetry through a tri-national comparison of gaseous formaldehyde amount fraction

A validation study for primary formaldehyde gas standards was performed at three National Metrology Institutes: the Korea Research Institute of Standards and Science (KRISS), the National Metrology Institute of Japan (NMIJ) and the National Institute of Metrology of China (NIM). The studied materials had a nominal amount fraction of 2 μmol/mol formaldehyde in nitrogen balance and were prepared in 10-L aluminum cylinders by KRISS. The impurities in the materials were analyzed using a gas chromatograph/atomic emission detector and a Fourier-transform infrared spectrometer (FTIR). The stability of the materials was assessed for 1 year by KRISS using paraformaldehyde as a source for the primary standard gas and a cavity ring-down spectrometer (CRDS) instrument as the measurement method. The amount fraction of formaldehyde in the materials decreased linearly by 0.74 % each month. The studied materials that exhibited similar linear rates of decline were distributed to the participants. After the measurement was completed by the participants, the materials were returned to KRISS and the stability analysis based on the primary standard maintained at KRISS was repeated. NMIJ analyzed the materials using paraformaldehyde as the source of the primary standard of formaldehyde and FTIR analysis, whereas NIM used trioxane as the primary standard gas source and CRDS analysis. The results of the comparison revealed good agreement between the results and were within the expanded uncertainty of 2 % although each of them used different combinations of methods in the generation of primary gas standards and measurements.     

Electric field induced non-linear multisubband electron mobility in V-shaped asymmetric double quantum well structure

ABSTRACT

We study the effect of the external electric field F_ext on the low-temperature electron mobility μ in an asymmetrically doped Al_xGa_1-xAs based V-shaped double quantum well (VDQW) structure. We show that nonlinearity of µ occurs under double subband occupancy on account of intersubband effects. The field F_ext alters the VDQW potential leading to transfer of subband wave functions between the wells, which affects the scattering potentials and hence μ. In the VDQW structure, due to the alloy channel layer, the alloy disorder (Al-) scattering happens to be significant along with the ionised impurity (Imp-) scattering. The non-linear behaviour of μ is because of μ^Imp, while the overall magnitude of μ is mostly due to μ^Al. The increase of difference in the doping concentrations of the outer barriers increases the nonlinearity of μ. The oscillatory character of μ is amended by varying the width of the well and barrier and also the height of the VDQW. Our results can be used to study VDQW based nanoscale field effect transistor structures.     

Alkali Metal–Promoted Facile Synthesis of Secondary Amines from Imines and Carbodiimides

We present here an efficient method for the hydroboration of aldimines (-C=N-) with pinacolborane (HBpin) using an alkali metal catalyst, potassium benzyl. The reaction was accomplished with unprecedented catalytic efficiency under mild and solvent-free conditions to afford the high yield of the corresponding N-boryl amines up to 97%. Various functionalities on aldimines were incorporated for hydroboration. The corresponding boryl amines were subjected to further hydrolysis to yield the corresponding secondary amines with good yields up to 89%. This protocol for the reaction demonstrates an atom-economic and green method with diverse imines that bears excellent functional group tolerance. Chemoselective reduction of imines was also attained, with good yields of 74–89%. We also propose the most plausible mechanism involving the formation of metal hydride as the active pre-catalyst.     

One pot,three component 1,3 dipolar cycloaddition: Regio and diastereoselective synthesis of spiropyrrolidinyl indenoquinoxaline derivatives

A competent and highly discriminating one-pot synthesis of highly diversified novel functionalized indenoquinoxalone grafted spiropyrrolidine linked chromene-3-carbonitrile conjugates accumulating three pharmocophoric cores, heterocyclic indenoquinoxalone, pyrrolidines and chromene-3-carbonitrile in a single molecular framework by means of 1,3-dipolar cycloaddition reaction between indenoquinoxalone, proline/benzyl amine and chromene-3-carbonitrile in ethanol under classical and microwave conditions is described. The three component 1,3-dipolar cycloaddition reaction proceeds via in situ generation of azomethine ylides by the decarboxylative condensation of indenoquinoxalone with proline/benzyl amine and their selectivity towards the endo cyclic double bonds of dipolarophile (chromene-3-carbonitrile) leading to the formation of highly functionalised regio- and diastereoselective molecular hybrids. This methodology exemplifies the green chemistry protocol such as mild reaction conditions, high yields, one-pot procedure and operational simplicity.