Determination of 1,3-benzodioxanes in Piper mullesua by high-performance thin-layer chromatography

A new, simple, precise, and rapid high-performance thin-layer chromatographic method was developed for the determination of 6 benzodioxanes in Piper mullesua extract: 1',3'-benzodioxole-5'-(2,4,8-triene-isobutyl nonanoate), 1',3'-benzodioxole-5'-(2,4,12-triene-isobutyl tridecanoate), fargesin, sesamin, asarinin, 1',3'-benzodioxole-5'-(2,4,8-triene-methyl nonanoate). The ingredients were separated on a precoated Silica Gel 60 F254 plate with a solvent system of toluene-acetone (92 + 8). The 6 benzodioxanes were well separated and easily identified in this chromatographic system. The separated benzodioxanes were visualized by color development with a spray reagent consisting of 1 g vanillin dissolved in 100 mL H2SO4-ethanol (5 + 95, v/v). Quantitation was performed by scanning the spots and comparing the integrated areas of compounds in samples with those of standards. Recoveries from samples spiked with known amounts of the benzodioxanes were excellent. The results were comparable with those estimated by liquid chromatography.     

Potential energy surface of thionylimide

The potential energy surface (PES) of thionylimide has been searched using ab initio MO and density functional calculations. The electronic structures of the isomers of HNSO have been studied using the HF/6‐31+G*, MP2(full)/6‐31+G*, and B3LYP/6‐31+G* levels. Final energies of these molecules have been calculated at the high‐accuracy G2 and CBS‐Q levels. The probable pathways of isomerization of thionylimide to its isomers (e.g., thiocyanic acid, HONS, nitrosothiols) have been explored by studying the three‐ or four‐membered transition states. This study identified total eight possible isomers ( 1–8 ) of HNSO, of which four ( 1–4 ) have already been realized experimentally. Of the remaining four ( 5–8 ), at least two ( 5, 7 ) can be generated experimentally. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Electric field gradients in various chemical environments of133Ba by the sum peak method

The sum peak at 437 keV (356+81 keV) has been measured in various chemical and physico-chemical environments. The fact that the intensity ratio of the sum peak to its single peak changes with the circumstances in which the radioactive source is placed is used to observe the effect of the chemical environment on directional correlation coefficients of 351–81 keV cascade in¹³³Ba−¹³³Cs decay and to detect the variations in the electric field gradient in different barium compounds. The sum peak method has been found to be useful in describing the chemical influences onG ₂₂ parameters and hence in the study of electric field gradients.     

Über die Herstellung von Äther der enantio-14, 15-Dinorlabdan-Reihe aus Eperusäure

The Conversion of Eperuic Acid into Ethers of the enantio-14, 15-Dinorlabdane Series 5 and 6 are strongly odiferous substances of the ambra-type. Their enantiomers 7 and 8 , hitherto unknown, have been synthesized from eperuic acid (4) and their olfactory properties compared with those of 5 and 6 . 4 was esterified by CH₂N₂ and dehydrogenated with (C₆H₅Se)₂/H₂O₂ to the α,β-unsaturated ester 9 (61%). Oxidation by KMnO₄ in acetone yielded the ketone 3 (60%). Epoxidation followed by treatment with acid converted 3 into the acetals 7 (61%) and 8 (14%). 7 and 8 differ from 5 and 6 in odor intensity, and 6 and 8 show slightly different odor quality.     

Application of the sum peak method to study changes in the K-capture probability to the 1086 keV level and perturbed angular correlation parameters in the decay of152Eu

The sum peak method has been applied to electron capture probability changes to the 1086 keV level in the decay of¹⁵²Eu in the different environments, e.g. ethylenediaminetetraacetic acid (EDTA), bovine serum albumin (BSA) and hydrochloric acid (HCl). An attempt is also made to determine the effect of chemical environment on the directional correlation coefficient of the 1409–122 keV - cascade in¹⁵²Eu ¹⁵²Sm decay. A change of G₂₂ is found in the different chemical forms.     

Isomeric ruthenium terpyridine complexes [Ru(trpy)(L)Cl]n+ containing the unsymmetrically bidentate acceptor L=3-amino-6-(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine. Synthesis, structures, electrochemistry, spectroscopy and DFT calculations

The isomeric title complexes were obtained in almost equimolar ratio from the reaction of Ru(trpy)Cl3 and L. Crystal structure analyses of the perchlorate hemihydrates, electrochemical and spectroscopic (NMR, UV/VIS, EPR) studies, supported by DFT calculations, reveal distinct differences between the isomeric redox series [1]n+(tetrazine-Nt trans to Cl) and [2]n+(pyrazolyl-Np trans to Cl; n= 0, 1, 2). The latter system with the pi acceptors trpy and tetrazine in the equatorial plane and the pyrazolyl and chloride donors in the axial positions exhibits facilitated oxidation, lower energy MLCT transitions, more balanced chelate coordination, and a higher g anisotropy in the oxidised (RuIII) state. According to partially resolved EPR spectra of one-electron reduced neutral compounds and they have the unpaired electron predominantly in the tetrazine ring of L.     

Heat-resistant polymers from melt-processable bisimido-bisphthalonitriles

Heat-resistant polymers which are processable into void-free components and suitable for composite applications have been synthesized by thermal/chemical polymerization of four newly developed bisimido-bisphthalonitriles containing silicon, ether, carbonyl, and hexafluoroisopropylidene groups. Thermal polymerization involving addition reactions was performed at 200–275°C for 2–10 h and then post-curing at 310°C for 10 h. Polymers VI, VII, VIII , and IX were obtained. The thermal polymerization was monitored using infrared spectroscopy. Thermal polymerization was also carried out in the presence of an aromatic diamine. A polyhexasocyclane ( V ) was synthesized by condensation polymerization of ether containing bisimido-bisphthalonitrile with 4,4′-diaminodiphenyl ether in solvent phenol. The synthesized polymers were evaluated for thermal stability using dynamic thermogravimetric analysis (TGA). Polymers VII, VIII, IX , and X showed thermal decomposition temperature in the range of 475–500°C in nitrogen and air atmosphere. The char yield of the polymers was in the range of 60–69% in nitrogen at 800°C. This study indicated that synthesized thermosetting polymers from ether and keto containing bisimido-bisphthalo-nitrile are potential candidates for development of graphite composites. © 1993 John Wiley & Sons, Inc.     

Physico-chemical properties of the sodium salts of some fatty acids in formamide solution in the temperature range 15–45°C

The thermal stability of some boracites, CuB₇O₁₃Cl, NiB₇O₁₃Br and FeB₇O₁₃I, was investigated using thermogravimetry in air up to 1000°, DTA in air to 1200° and evolved gas analysis in vacuum to 1200°C. Only the FeI compound showed weight loss below 1000°C. The endothermic peaks associated with melting were CuCl (1025°C), NiBr (1150°C) and FeI) (965°C). Evolved gas analysis indicated major differences in the decomposition products of the three materials.     

Kinetic studies of nonaqueous polymerization of methyl methacrylate initiated by ferric laurate–n-hexyl amine system

The polymerization of methyl methacrylate was studied in carbon tetrachloride medium with ferric laurate, a metal soap, in combination with n-hexyl amine as the initiator system at 60°C. The rate of polymerization was found to be linear with the monomer concentration and proportional to the square root of both ferric ion and amine concentration. A reaction scheme involving initial complex formation between ferric ion and amine and subsequent reaction of the complex with the solvent molecule to produce free radicals responsible for initiation of polymerization has been postulated to account for the observed results.     

Amino Acid based cationic surfactants in aqueous solution: physicochemical study and application of supramolecular chirality in ketone reduction

The present study provides a molecular understanding of the origin of the chirality in aqueous micelles and its correlation with the proficiency of stereoselective ketone reduction. The effects of varied headgroup architecture on the surface-active properties as well as on other microstructural parameters were studied and correlated to the structural differences of these naturally occurring amino acid containing surfactants (1-4). Micropolarity sensed by pyrene showed that the micelles prepared using 1-4 are mostly hydrated; particularly large headgroup size surfactant produces more polar environment. A theoretical study was done to quantify the varied spatial dissymmetry for all four surfactants. Asymmetric reduction of prochiral ketones was carried out at the aqueous micellar interface of these chiral amphiphiles by exploiting the supramolecular chirality as evidenced from a circular dichroism study. The enantioselectivity of the reduction process is rationally improved through increase in spatial dissymmetry and steric constraint imposed at the micellar interface by the polar head of surfactants.