Use of zwitterionic buffer additives to improve the separation of proteins in capillary zone electrophoresis

In CZE, the adsorption of the proteins on the capillary wall is a common problem. This paper describes the simple method of utilizing zwitterionic buffer additives to improve the separation of proteins in untreated fused silica capillaries at neutral pH. Three kinds of zwitterion are evaluated in the separation of acidic, neutral, and basic proteins, including their effect on protein efficiency, mobility, separation, and resolution; the difference between the effects of the different additives are also highlighted. The method has proved to be a possible means of reducing protein adsorption, especially for basic proteins.     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004     

The best uniform convergence rate of linear empirical bayes estimators

In this paper the thought on the uniform convergence of an empirical Bayes estimator or linear empirical Bayes (l.e.B.) estimator is advanced. Under two different models the l.e.B. estimators of the parameter are constructed respectively. It is proved that the convergence rates and uniform convergence rates of these l.e.B. estimators are all one with respect to the corresponding prior families. It is shown that the uniform convergence rate one is the best, under mild assumptions imposed on the conditional density of the sample.     

One convenient synthesis route to boron nitride nanotube

We describe one convenient synthesis route to boron nitride (BN) nanotube by the reaction of boron powder, iron oxide, and ammonium chloride at 600 °C for 12 h. Characterized by XRD, FTIR, XPS, TEM and SAED, the composition and morphology of the products are confirmed. The possible reaction mechanism is also discussed.     

截断情况下线性回归模型响应变量均值的经验似然

本文讨论了在带有截断情况的线性回归模型中 ,响应变量均值的估计问题 .将经验似然的方法应用到带有截断情况的回归模型中 ,在估计响应变量的均值时构造了调整的经验似然统计量 ,证明了在一定的条件下 ,该统计量渐近服从 χ2 分布 ,给出了均值的置信区间 ,并与正态下得到的结果进行了比较 ,模拟的结果说明了经验似然的优良性 .     

玻璃中CdSeS纳米晶体的室温光致发光谱

对掺有过饱和的镉、硒和少量硫的玻璃在500～800℃分别退火4h,生长了不同尺寸的CdSe_1-xS_x纳米晶体。测量了纳米晶体的室温吸收光谱和光致发光(PL)光谱,550℃生长的样品在300～800nm的范围没有观察到吸收和发光峰,表明温度低于550℃玻璃中不能形成纳米晶体。生长温度在600～650℃,纳米晶体的PL光谱主要为两个宽的发光带,即带边激子发光带和通过表面态复合的发光带。随着生长温度的升高,带边复合发光的蓝移减小,通过表面态的发光逐渐消失,并出现了叠加于宽发光带上的一系列明显的弱发射峰。不同温度生长的样品中,叠加峰的能量相同。同一样品中叠加峰的能量不随激发光波长的变化而变化。     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

水动力学问题的弱可压缩模型求解方法研究

从弱可压缩水动力学方程出发，采用坐标变换的方法处理自由表面，建立了能够模拟有自由表面流动问题的定常、非定常的三维水动力学模型和对流扩散模型，模型采用浮湍流模型进行封闭，并对模型求解的数值方法进行了研究。     

模余代数和Morita-Takeuchi关系

H是Hopf代数,C是H-模余代数。首先利用余积分的概念,诱导C的右H-余模结构,并构造了Smash余积余代数C×H,使C×H作为余代数同构于C H。然后,由C的右H-余模结构诱导C的左H0-模结构,令 C=C/KerεH0C,则C×H与 C有Morita-Takeuchi关系。