Adaption of a fragment analysis technique to an automated high-throughput multicapillary electrophoresis device for the precise qualitative and quantitative characterization of microbial communities

The analysis of microbial communities is of increasing importance in life sciences and bioengineering. Traditional techniques of investigations like culture or cloning methods suffer from many disadvantages. They are unable to give a complete qualitative and quantitative view of the total amount of microorganisms themselves, their interactions among each other and with their environment. Obviously, the determination of static or dynamic balances among microorganisms is of fast growing interest. The generation of species specific and fluorescently labeled 16S ribosomal DNA (rDNA) fragments by the terminal restriction fragment length polymorphism (T-RFLP) technique is a suitable tool to overcome the problems other methods have. For the separation of these fragments polyacrylamide gel sequencers are preferred as compared to capillary sequencers using linear polymers until now because of their higher electrophoretic resolution and therefore sizing accuracy. But modern capillary sequencers, especially multicapillary sequencers, offer an advanced grade of automation and an increased throughput necessary for the investigation of complex communities in long-time studies. Therefore, we adapted a T-RFLP technique to an automated high-throughput multicapillary electrophoresis device (ABI 3100 Genetic Analysis) with regard to a precise qualitative and quantitative characterization of microbial communities.     

Novel construction of the brassinolide side chain

A stereoselective synthesis of brassinolide, which involves construction of the side chain by a highly stereoselective aldol reaction between 20S-6β-methoxy-3α,5-cyclo-5α-pregnane-20-carboxaldehyde 2 and ketone 3 or 4 catalyzed by l-proline, is described.     

钙与 DBC-偶氮氯膦显色反应的研究及其在高纯氧化钇中钙的测定的应用

在PH8.5-9的液中,钙可与DBC-偶氮氯膦形成一种紫色的稳定配合物。该配合物在625nm处有最大吸收,表观摩尔吸光系数为2.6×10~4L.mol~(-1).cm~(-1),配合物组成为Ca:DBC-偶氮氯膦=1:1。在Zn-DTPA和乙二胺的存在下,较大量的Y~(3+)、Fe~(3+)及Cu~(2+)、Mo(Ⅵ)、Cr~(3+)等三十余种离子不干扰钙的测定。方法的选择性较好,利用本方法,并经简单萃取分离基体后,测定了高纯氧化钇和易切削钢中的微量钙,结果令人满意。标准加入试验回收率好。方法简便实用。     

3D H-bonding networks self-assembly from pyridinium derivatives and bis(maleonitriledithiolato)zincate(II)

The two ion-pair complexes, [pyH]₂[Zn(mnt)₂] (1) and [4,4′-bipyH₂]-[Zn(mnt)₂] (2), were synthesized, where mnt²⁻ denotes maleonitriledithiolate, and [pyH]⁺, [4,4′-bipyH₂]²⁺ represent pyridinium and diprotonated 4,4′-bipyridinium, respectively. Their single crystal structures show that there are strong bifurcated H-bonding interactions between the cations of the pyridinium derivative and the [Zn(mnt)₂]²⁻ anions in both 1 and 2. The bifurcated H-bonding interactions between the N–H of the pyridiniums and the CN groups of the mnt²⁻ ligands give rise to a 2D layered H-bonding network, the adjacent layers come together in such way as mutual embrace to give a tight pack, thus 2D hydrogen-bonding sheets further develop into 3D H-bonding networks through weak C–HS and ππ stacking interactions in 1. As for 2, the cations and anions connect into several types of H-bonding macrorings ([2+2], [3+3] and [4+4]), these H-bonding macrorings fuse to extend into 2D layered structure, the interpenetration between [3+3] and [4+4] type H-bonding macrorings in the adjacent layers give further rise to novel 3D extended H-bonding networks, in which there are clearly parallel stacks of cations and the chelate rings of anions.     

Electronic density of levels in a disordered system

Three-, two-, and one-dimensional disordered systems with randomly distributed, purely repulsive scattering centers, known as Lorentz models, are studied in the low energy limit [1]. Using a functional integral representation and a version of the “replica trick”, we have found in the D-dimensional system the density of electronic levels of the form

$\text{n(E)=b}{}_0\text{Eγ}\text{exp}\text{(?b}{}_1\text{E}{}^{\mathrm{<mtext>?(</mtext><mtext>D</mtext><mtext>2</mtext><mtext>)</mtext>}}\text{+b}{}_2\text{E}{}^{\mathrm{<mtext>?(</mtext><mtext>D</mtext><mtext>2</mtext><mtext>)+1</mtext>}}\text{+·+b}{}_{\mathrm{D}}\text{E}{}^{\mathrm{<mtext>?(</mtext><mtext>1</mtext><mtext>2</mtext><mtext>)</mtext>}}\text{)(1+O(}\text{E}\text{))}$

and the constants b₀, b₁,…, b_D, and γ have been determined.     

Preparation and Characterization of a Sol-Gel Prepared Ferroelectric Sandwich Structure

A novel silicon-based PbTiO₃/Pb(Zr,Ti)O₃/PbTiO₃ (PT/PZT/PT) sandwich structure has been prepared using a sol-gel method. The annealing temperature is greatly reduced compared with those structures without PT layers. Capacitance-voltage (C-V), leakage current-voltage (I-V), polarization-field (P-E), dielectric-frequency response and polarization fatigue of the sandwich structure are examined. The relative dielectric constant, the coercive field and the remanent polarization of the PZT films are measured to be about 900, 18 kV/cm and 16 C/cm² respectively. The current density is less than 5 × 10^–9 A/cm² below 200 kV/cm. The dielectric constant of the structure remains constant at low frequency, and decreases to some degree at high frequency. The retained polarization does not change significantly after 8 × 10⁹ read/write cycles. The PZT films are proved to have very good dielectric and ferroelectric properties. The new PT/PZT/PT sandwich structure can be valuable for memory devices and other applications.     

Sorption and desorption of neptunium(V) on calcareous soil and its solid components: A comparative study

The sorption and desorption isotherms of untreated calcareous soil and three treated soils to remove CaCO₃, organic matter (OM) and both CaCO₃ and OM were determined and analyzed with the Freundlich equation at pH 7.8, moderate concentrations of NpO₂ ⁺ (~10^-5mol/l), in the presence of 0.01 mol/l CaCl₂ and under ambient aerobic conditions. The relative contribution of CaCO₃ and OM to the neptunium(V) sorption on calcareous soil and the sorption/desorption hysteresis is discussed. The effects of adding fulvic acid (FA) and carbonate in to the solution on the sorption of neptunium(V) on the soils were also studied. The sorption and desorption characteristics of NpO₂ ⁺, Zn²⁺, Sr²⁺ and Cs⁺ on the soils are compared.     

Inverse relaxation-model and relation to recovery internal friction

Inverse relaxation is studied for hard elastic polypropylene (HEPP), rubber and non-elastic polypropylene. The results show that contractive stress, stress, and internal friction are three essential factors related to the phenomenon. A three-element model in which each element has a definite meaning is proposed to describe this phenomenon. The results also show that, in the first cyclic deformation, relaxation time increases with the increase of recovery for all the materials, which indicates that recovery viscosity increases with the increase of recovery, but the stress rising amplitude (SRA) of inverse relaxation has a maximum in the recovery range. Analysis indicates that SRA equals recovery internal friction (RIF) for ideal material in which stress is solely a function of strain, independent of paths, and approximately equals RIF for non-ideal material at a given strain. From this principle it is found that the order of the work counteracted by RIF for the four materials is the same as that of their second hysteresis loop, and the RIF of HEPP has a sudden increase at the later recovery range.     

合成云母蒙脱石及其交联物在乙醇氨化反应中的催化行为

用水热法合成了云母蒙脱石,并与羟基铝齐聚物交联,DTA和IR结果表明,由于柱的引进,高温焙烧时层内八面体上羟基脱除变得较为容易。由NH_3-TPD和吡啶吸附测得的表面酸性表明Al-CLS具有较SMM更多的弱酸和强酸中心。催化剂上弱酸中心有利于醇的脱水,而吸附在强酸中心上的NH_3有利于醇的胺化。