研究类氦原子基态能量的参数微扰法

考虑了类氦原子中电子对核的屏蔽效应,建立了含有屏蔽效应参数的哈密顿算符,并应用微扰理论研究了类氦原子基态能量.通过参数微扰法计算的类氦原子一级近似基态能量与变分法得到的能量完全相同,比无参数微扰法计算的能量更加接近实验值.参数微扰法为研究多电子原子能级和原子能级精细结构提供了一种新的方法.     

基于一组卡尔曼滤波器信息融合的故障诊断

为了能及时准确地诊断发动机的传感器和执行机构故障,文章提出了基于一组卡尔曼滤波器信息融合的方法进行故障诊断;首先根据传感器特性设计了一组滤波器用于传感器故障诊断、隔离,每个滤波器针对一个传感器进行设计;其次根据执行机构故障特性设计了一组卡尔曼滤波器进行执行机构偏差估计,从而对执行机构进行故障诊断、隔离;接着给出了传感器、执行机构信息融合的诊断方案;最后分别给传感器、执行机构添加故障进行方案验证,仿真结果得出在传感器或者执行机构任意部件出故障的情况下,该融合方法可以有效地诊断并隔离出有故障的传感器或者执行机构。     

Is JPC=3-+ molecule possible?

The confirmation of charged charmonium-like states indicates that heavy quark molecules should exist.Here we discuss the possibility of a molecule state with J P C= 3-+. In a one-boson-exchange model investigation for the S wave C = + D* ˉD*2states, one finds that the strongest attraction is in the case J = 3 and I = 0 for bothπ and σ exchanges. Numerical analysis indicates that this hadronic bound state might exist if a phenomenological cutoff parameter around 2.3 Ge V(1.5 Ge V) is reasonable with a dipole(monopole) type form factor in the one-pionexchange model. The cutoff for binding solutions may be reduced to a smaller value once the σ exchange contribution is included. If a state around the D* ˉD*2threshold(≈4472 Me V) in the channel J/ψω(P wave) is observed, the heavy quark spin symmetry implies that it is not a cˉc meson and the J P C are likely to be 3-+.     

奥氏体不锈钢深冷低温冲击试验方法研究

以液氦作为冷源,结合G-M低温制冷机,实现-196~-269℃深冷温度环境,探索深冷低温冲击试验方法。结果表明,试样从低温环境中取出后置于大气环境中,温度出现快速回升。对于不同试验低温,可采用不同方法进行试验。试验温度T=4.2K时,可采用制冷机预冷+液氦持续喷淋的方法进行降温。试验温度10≤T77K时,可采用玻璃容器填充气凝胶粉体对试样进行绝热保温处理;或根据试验温度以及回温测试结果,以一定的过冷温度补偿值保证试验温度。过冷温度补偿方法可满足常规冲击试验的要求,但需要相对较大的过冷温度补偿值;玻璃容器填充粉体包裹试样,可减缓试样温度回升,但对材料冲击吸收能量有一定影响,可用多试样冲击试验并进行修正以反映材料冲击韧性水平。     

扩散过程中弱相干光场的退相干

研究了扩散过程中弱相干光场量子特性的演化.利用正规乘积、反正规乘积和Weyl编序算符内的积分技术,采用热纠缠态表象求解密度矩阵主方程,利用Kraus算符给出扩散过程中密度算符解的表达式,导出初态为弱相干态的量子态密度算符演化规律.讨论了扩散对光场压缩效应和反聚束效应的影响.结果表明:随着扩散过程的进行,弱相干场压缩深度和压缩范围均在减小;扩散初期光场呈反聚束效应,扩散时间大于一定值后反聚束效应消失.     

适用于波前处理器的自适应光学系统非共光路像差补偿方法

提出了一种适合硬件形式波前处理器的非共光路像差校正方法.讨论了非共光路像差的产生原因和运用相位差异技术检测非共光路像差的方法.根据波前处理器的工作流程,推导了将非共光路像差折算到波前探测器参考点偏移量的算法,编写了实现算法的主控计算机软件模块.在望远镜光路中以光源为目标开展实验,用本文算法校正后,目标能量集中度提高了17.6%,证明了该方法的可行性.     

利用固体物理LED发光原理测量普朗克常数

普朗克常数是物理学中一个重要的常数,利用二极管的量子特性探讨运用发光二极管来测量普朗克常数。通过测量二极管的伏安曲线,确定其阈值电压,根据相关量子理论,间接得出普朗克常数,通过与光电效应法测量普朗克常数的测量结果相比较,结果表明此误差略大,但作为一种新型的实验方法探索,对于开拓学生的综合素养还是非常有益的。     

氟比洛芬酯对子痫前期患者剖宫产术后静脉自控镇痛疗效观察

目的 观察氟比洛芬酯复合丁丙诺啡和单用丁丙诺啡对子痫前期患者剖宫产术后静脉自控镇痛（PCIA）的临床效果和 应用价值。方法 选择90例ASAⅠ～Ⅱ级在腰硬联合麻醉下行子痫前期剖宫产术患者,按随机数字表法分为A组（胎儿娩出后氟比洛芬酯+术后丁丙诺啡PCIA）、B 组（术后氟比洛芬酯+丁丙诺啡PCIA）和C 组（术后丁丙诺啡PCIA）,每组30例。观察并记录患者术后1、2、4、12、24h 视觉模拟评分（VAS）、Ramassay镇静评分,平均动脉压（MAP）、心率（HR）及术后恶心、呕吐、嗜睡、皮肤瘙痒等不良反应发生情况,分别于麻醉前、术后4、12 和24h抽取静脉血,检测血清肾上腺素、去甲肾上腺素、多巴胺、血浆儿茶酚胺和内皮素的水平。结果 A 组和B组患者术后各时点VAS 评分均明显低于C组（P＜0.05）,A 组和B 组各时点Ramsay 镇静评分均明显高于C组（P＜0.05）;A 组和B 组术后各时点MAP 和HR 均明显低于C 组（P＜0.05）;术后24h 内PCIA 按压次数A 组和B 组明显低于C组（P＜0.05）;A 组和B 组术后各时点血清肾上腺素、去甲肾上腺素、多巴胺和内皮素水平均明显低于C 组（均P＜0.05）;A 组术后4h 内皮素水平明显低于B 组（P＜0.05）;A 组和B 组头晕、嗜睡、恶心、呕吐发生率均低于C 组（均P＜0.05）。结论 氟比洛芬酯能有效抑制术后应激,镇痛效果好且不良反应少,在胎儿娩出后应用氟比洛芬酯并结合术后丁丙诺啡进行PCIA更适合用于子痫前期剖宫产术后患者术后镇痛。     

Improvement of resistive switching fluctuations by using one step lift‐off process

Bipolar resistive switching characteristics are investigated in ZrO₂ containing Cu thin layer devices, particularly for the self‐isolated‐structure device fabricated by one step lift‐off process. Compared with the traditional‐structure device, the self‐isolated‐structure device shows more uniform resistive switching characteristics. This is because the isolation of each device cell has negligible influence on each other and thus mitigates possible crosstalk between each cell. These results suggest that the feasibility of good stabilization of the resistive switching parameters can be obtained through one step lift‐off process. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Charge carrier decay and diffusion in organic–inorganic CH3NH3PbI3–xClx perovskite based solar cell

In recent years, organic–inorganic lead halides attracted widespread interest, mainly due to their impressive photoconversion properties and low‐cost solution processing. In this study, we employed small amplitude transient photovoltage and photocurrent spectroscopy to investigate charge transport and recombination properties of perovskite CH₃NH₃PbI_3–xCl_x solar cell under realistic light harvesting conditions (<1 sun). Cell structure resembles outlay commonly found in organic photovoltaics, with perovskite absorber being sandwiched between two thin layers of organic polymers. Tested device displayed high power conversion efficiency (10.3%), good fill factor and negligible hysteresis effect. Fundamental device parameters were characterized at various open‐circuit voltages (V_oc) by examination of small voltage and current perturbations created by the low intensity pulsed laser excitations. The obtained results exhibit long charge carrier lifetimes and fast charge transport over the full range of applied optical bias, as well as remarkable diffusion lengths exceeding 1 μm. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)