Study of the d-f Emission,and f-d Ground-State and Excited-State Absorption of Nd3+ in Crystals Using the Simple Model

The simplified model for 4f-5d transitions is applied to obtain the line strengths for emission, ground-state absorption and excited states absorption involving 4f-5d transitions of Nd³⁺ in crystals. The results are host independent for the usual case where 5d crystal-field interaction can be considered as strong, in the sense that the calculated 5d-4f emission relative line strengths will be the same for Nd³⁺ in any host. Also the calculated 4f-5d absorption line strengths can be grouped by the 5d crystal-field components. For each 5d crystal-field component, the group of absorption line strengths for different 4f²5d transition final states forms a pattern independent of the 5d crystal-field component and the host. For practical cases, due to strong but still limited 5d crystal-field splitting, the transitions to different 5d crystal-field components may overlap each other. The theoretical results are used to interpret available experimental data.     

Studies on the Nonisothermal Crystallization Behavior of Polypropylene/Multiwalled Carbon Nanotubes Nanocomposites

Polypropylene/multiwalled carbon nanotubes (PP/MWNTs) nanocomposites were prepared by a melt compounding process. The morphology and nonisothermal crystallization of these nanocomposites were investigated by means of optical microscopy, scanning electron microscopy, and differential scanning calorimetry. Scanning electron microscope micrographs of PP/MWNTs composite showed that the MWNTs were well dispersed in the PP matrix and displayed a clear nucleating effect on PP crystallization. Avrami theory, modified by Jeziorny and Mo's method, was used to analyze the kinetics of the nonisothermal crystallization process. It was found that the addition of MWNTs improved the crystallization rate and increased the peak crystallization temperature of the PP/MWNTs nanocomposites as compared with PP. The results show that the Jeziorny theory and Mo's method successfully describe the nonisothermal crystallization process of PP and PP/MWNTs nanocomposites.     

Trace Elements in Lycium barbarum L. Leaves by Inductively Coupled Plasma Mass Spectrometry after Microwave Assisted Digestion and Multivariate Analysis

The concentrations of 14 elements in Lycium barbarum L. leaves collected from the Qaidam basin (China) were determined by inductively coupled plasma mass spectrometry after microwave assisted digestion. This work presents two goals: (1) to determine 14 elements in L. barbarum leaves; (2) to examine the relationship between elements using correlation analysis, principal component analysis, and cluster analysis. The accuracy and precision were verified against a GBW07605 Tea Leaves certified reference material. The results demonstrated that the method was reliable, reproducible, and suitable for determination of the concentrations of trace elements in L. barbarum leaves. Correlation analysis showed that aluminum–copper, arsenic–zinc, manganese–selenium, and chromium–iron have medium correlation coefficients. Principal component loading for L. barbarum leaves extracted seven components explained about 85% of the total variance. Cluster analysis depicts four clusters: (1) arsenic and titanium; (2) calcium, magnesium, manganese, selenium, and zinc; (3) cobalt, iron, and molybdenum; (4) aluminum, copper, and chromium.     

Formation of hydrophobic coating on PMMA surface using unipolar nanosecond-pulse DBD in atmospheric air

Dielectric barrier discharge (DBD) can modify the material surface and result in complicated physical and chemical reactions to improve the surface hydrophilicity, which is proved to be an effective method for surface modification. Compared with the traditional ac-excitation DBD, the DBD using unipolar pulses can avoid local overheat of microdischarges and can improve discharge efficiency under some conditions. In this paper, DBD excited by repetitive unipolar nanosecond generator was used to improve the hydrophobicity of Plexiglass (PMMA) surface by means of the interaction between air plasma and silicone oil. The output voltage had a rise time of 40 ns and a full width at half maximum of about 70 ns. The surface hydrophobicity of the PMMA, before and after the surface modification, was evaluated via the contact angle measurement under different experimental conditions. The values of the contact angle shown in this paper were the average of eight measured values, and the standard deviations were also calculated. The surface energy including polar and dispersion components was calculated using the measured average contact angles of distilled water and polyethyleneglycol. The results showed that, as the increase of the discharge voltage, the contact angle increased but the surface energy decreased. With the increase of treatment time, the water contact angle of the modified surface increased at the beginning, and it would reach to a maximum at 7.5 min treatment, and then decreased. The effect of pulse frequency on the modification results was different at various treatment times. In addition, the possible physical and chemical reaction among the DBD plasma, silicone oil and the PMMA surface was discussed.     

Quasi-static deformation and final fracture behaviour of aluminium alloy 5083: influence of cryomilling

The commercial aluminium alloy 5083 was processed via cryomilling to produce nanocrystalline (NC) powders with an average grain size of ～25–50?nm. The powders were subsequently degassed at 723 K (450°C), pre-heated and immediately quasi-isostatic (QI)-forged to produce a thermally stable bulk ultrafine grain (UFG) material having average grain size values ranging from 190 to 350?nm, depending on the processing conditions used. In this paper, the tensile properties and fracture behaviour of the bulk UFG material are presented and compared with the tensile properties of its conventionally processed counterpart. The specific influence of preheat temperature on strength and ductility of the alloy is briefly discussed. Three different pre-heat temperatures of 523, 623 and 723?K (250, 350 and 450°C) were chosen and used with the primary objective of controlling grain growth during forging. The influence of preheat temperature on tensile deformation and final fracture behaviour is highlighted. The macroscopic fracture modes of the bulk nanostructured material (BNM) prepared following three pre-heat temperatures are investigated. The microscopic mechanisms controlling tensile deformation and final fracture behaviour are discussed with regards to the intrinsic microstructural effects in the UFG alloy, nature of loading, and the kinetics and mechanisms of deformation.     

Microplasma Technology and Its Applications in Analytical Chemistry

Abstract

This review article describes some existing microplasma sources and their applications in analytical chemistry. These microplasmas mainly include direct current glow discharge (DC), microhollow-cathode discharge (MHCD) or microstructure electrode (MSE), dielectric barrier discharge (DBD), capacitively coupled microplasmas (CCμPs), miniature inductively coupled plasmas (mICPs), and microwave-induced plasmas (MIPs). The historical development and recent advances in these microplasma techniques are presented. Fundamental properties of the microplasmas, the unique features of the reduced size and volume, as well as the advantageous device structures for chemical analysis are discussed in detail, with the emphasis toward detection of gaseous samples. The analytical figures of merit obtained using these microplasmas as molecular/elemental-selective detectors for emission spectrometry and as ionization sources for mass spectrometry are also given in this review article.     

矩阵方程AV＋BW=VF的两种解析通解

本文给出了矩阵方程AV BW=VF的两种解析通解,特别第二种通解还分别为自由参向量和F阵特征值的显式线性表示,本文结果较已有结果简单,适用范围广,且应用方便。     

一类非线性时序模型非遍历性的一个充分条件

本文研究了一类由紧算子与加性i.i.d.干扰确定的非线性时间序列的非遍历性,揭示了这类非线性时间序列的非遍历性与其相应确定性部分的Lyapunov函数之间的联系。     

泛函梯度数值计算的一种新方法—正交试验法

本文研究并揭示了L_(2~a)(2~(2~a-1))型正交表行(列)间的递推规律,提出了一种泛函梯度数值计算的新方法——正交试验法,该方法在计算速度和精度上优于直接梯度法;在通用性及节省内存方面优于伴随算子法。     

算子点态遍历定理

本文证明了关于Ｌ^P（１≤Ｐ≤∞）空间中线性算子与非线性算子的几个点态遍历定理，还推广了Ｙｏｓｉｄａ与ＫａＫｕｔａｎｉ关于拟紧算子的一致遍历定理。