New Dammarane Monodesmosides from the Acidic Deglycosylation of Notoginseng‐Leaf Saponins

Three new dammarane monodesmosides, named notoginsenosides Ft₁ ( 1 ), Ft₂ ( 2 ), and Ft₃ ( 3 ), together with three known ginsenosides, were obtained from a mild acidic hydrolysis of the saponins from notoginseng (Panax notoginseng (Burk .) F. H. Chen ) leaves. Their structures were elucidated to be (3β,12β,20R)‐12,20‐dihydroxydammar‐24‐en‐3‐yl O‐β‐D ‐xylopyranosyl‐(1 → 2)‐O‐β‐D ‐glucopyranosyl‐(1 → 2)‐β‐D ‐glucopyranoside ( 1 ), (3β,12β)‐12,20,25‐trihydroxydammaran‐3‐yl O‐β‐D ‐xylopyranosyl‐(1 → 2)‐O‐β‐D ‐glucopyranosyl‐(1 → 2)‐β‐D ‐glucopyranoside ( 2 ), and (3β,12β,24ξ)‐12,20,24‐trihydroxydammar‐25‐en‐3‐yl O‐β‐D ‐xylopyranosyl‐(1 → 2)‐O‐β‐D ‐glucopyranosyl‐(1 → 2)‐β‐D ‐glucopyranoside ( 3 ), by means of spectroscopic evidences. The known ginsenosides Rh₂ and Rg₃ 4 – 6 were obtained as the major products from this acidic deglycosylation.     

Effect of Sulfate on an Iron Manganese Catalyst for Fischer-Tropsch Synthesis

The effect of sulfate on Fischer-Tropsch synthesis performance was investigated in a slurry- phase continuously stirred tank reactor(CSTR)over a Fe-Mn catalyst.The physiochemical properties of the catalyst impregnated with different levels of sulfate were characterized by N_2 physisorption,X-ray photoelectron spectroscopy(XPS),H_2(or CO)temperature-programmed reduction(TPR),Mφssbauer spectroscopy,and CO_2 temperature-programmed desorption(TPD).The characterization results indicated that the impregnated sulfate slightly decreased the BET surface area and pore volume of the catalyst, suppressed the catalyst reduction and carburization in CO and syngas,and decreased the catalyst surface basicity.At the same time,the addition of small amounts of sulfate improved the activities of Fischer- Tropseh synthesis(FTS)and water gas shift(WGS),shifted the product to light hydrocarbons(C_1-C_(11)) and suppressed the formation of heavy products(C_(12 )).Addition of SO_4~(2-)to the catalyst improved the FTS activity at a sulfur loading of 0.05-0.80 g per 100 g Fe,and S-05 catalyst gave the highest CO conversion(62.3%),and beyond this sulfur level the activity of the catalyst decreased.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

羟乙基皂仁胶水溶胶和凝胶体系流变性的研究——不含交联剂溶胶体系的粘度

研究了羟乙基皂仁胶水溶胶体系的粘度对浓度、温度和切变速率的依赖性。溶胶的表观粘度进行了非牛顿校正,其表观粘度的切变速率依赖性可用幂律模型描述。采用Spencer-Dillon方程求得的体系零切粘度与浓度的关系可用Onogi公式描述。对于溶剂和较稀溶液,温度对粘度的影响可用Andrade公式描述,但对较浓溶液,此式不再适用。     

MEASUREMENTS OF CHAIN INTERPENETRATION OF POLYMER GLASSES

The concept of entanglement provides the basis of our current understanding of the flow behavior of polymer melts, Current techniques developed to investigate the degree of interpenetration of polymer chains only provide indirectly the information of the degree of entanglement in a relatively large scale （several to tens of nanometer）. In this article, we report ^1H-NMR spectroscopy with dipolar filters under fast magic angle spinning for probing chain interpenetration of polymer glasses at the molecular level.     

Sorption and desorption of neptunium(V) on calcareous soil and its solid components: A comparative study

The sorption and desorption isotherms of untreated calcareous soil and three treated soils to remove CaCO₃, organic matter (OM) and both CaCO₃ and OM were determined and analyzed with the Freundlich equation at pH 7.8, moderate concentrations of NpO₂ ⁺ (~10^-5mol/l), in the presence of 0.01 mol/l CaCl₂ and under ambient aerobic conditions. The relative contribution of CaCO₃ and OM to the neptunium(V) sorption on calcareous soil and the sorption/desorption hysteresis is discussed. The effects of adding fulvic acid (FA) and carbonate in to the solution on the sorption of neptunium(V) on the soils were also studied. The sorption and desorption characteristics of NpO₂ ⁺, Zn²⁺, Sr²⁺ and Cs⁺ on the soils are compared.     

Uniform hierarchical silica film with perpendicular macroporous channels and accessible ordered mesopores for biomolecule separation

Herein, we demonstrate that silica films with perpendicular macroporous channels and accessible ordered mesopores can be conveniently prepared. The hierarchical macroporous–mesoporous silica films are synthesized by using zinc oxide nanorod array as macroporous template and CTAB surfactant as mesoporous template. In basic surfactant-containing solution, ordered mesoporous silica shells homogeneously grow on the zinc oxide nanorod array. The growth of the mesostructures do not require any chemical modification for the zinc oxide nanorod, which opens a new way for preparing hierarchical silica films with perpendicular mesochannels. The prepared hierarchical macroporous–mesoporous silica films possess a uniform thickness of 2 mm, large perpendicular macropores with a length of 1.8 mm and a width of 80 nm, and accessible ordered mesopores. Separation experiment demonstrates that this macroporous–mesoporous film can effectively separate biomolecules with different sizes.     

硅胶固载化─（Lewis）酸催化剂的研究Ⅰ．硅胶固载化─四氯化钛复合物催化体系

以硅胶球为基质键合γ－ＧＯＰＳ并各接枝上具有络合功能的三种配体，邻位氨基吡啶、间酰氨基吡啶及对酰氨基吡啶，再和ＴｉＣｌ＿４络合成固载化的Ｌｅｗｉｓ酸催化剂，将这些催化剂进行缩醛、缩酮及酯化反应，有很好的催化活性，重复使用多次不失效．本文在合成此类催化剂的过程中利用热失重（ＴＧ）法及等离子光谱法（ＩＣＰ）等检测方法对合成此类催化剂的每一步进行跟踪检测，得到键合反应，开环反应及络合反应过程中的键合量，开环相量和ＴｉＣｌ＿４络合量的定量数据．对固载化催化剂表面的接枝量有所了解，从而可进一步检测此类催化剂的催化效应并得到一些启示．     

One—Pot Synthese of 3,4—Dihydropyrimidine—2（1H）—thiones Catalyzed by La（OTf）3

A general and practical procedure for the syntheses of 3,4-di-hydropyrimidine-2(1H)-thiones by a one-pot condensation of aldehyde,β-ketoester or β-diketone and thiourea using La(OTf)3 as the catalyst is described.Mild reaction conditions,excellent yields as well as the environmentally friendly character of La(OTf)3 make it an important alternative to the classic acid-catalyzed Biginelli‘s reaction.     

Synthesis of comb‐shaped poly(methyl methacrylate)‐b‐poly(polytetrahydrofuran acrylate) under 60Co γ‐ray irradiation

Comb‐shaped graft copolymers with poly(methyl methacrylate) as a handle were synthesized by the macromonomer technique in two steps. First, polytetrahydrofuran acrylate (A‐PTHF), prepared by the living cationic ring‐opening polymerization of tetrahydrofuran, underwent homopolymerization with 1‐(ethoxycarbonyl)prop‐1‐yl dithiobenzoate as an initiator under ⁶⁰Co γ irradiation at room temperature; Second, the handle of the comb‐shaped copolymers was prepared by the block copolymerization of methyl methacrylate with P(A‐PTHF) as a macroinitiator under ⁶⁰Co γ irradiation. The two‐step polymerizations were proved to be controlled with the following evidence: the straight line of ln[M]₀/[M] versus the polymerization time, the linear increase in the number‐average molecular weight with the conversion, and the relatively narrow molecular weight distribution. The structures of the P(A‐PTHF) and final comb‐shaped copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3367–3378, 2002