Preparation of α-amino acids via Ni-catalyzed reductive vinylation and arylation of α-pivaloyloxy glycine

This work emphasizes easy access to α-vinyl and aryl amino acids via Ni-catalyzed cross-electrophile coupling of bench-stable N-carbonyl-protected α-pivaloyloxy glycine with vinyl/aryl halides and triflates. The protocol permits the synthesis of α-amino acids bearing hindered branched vinyl groups, which remains a challenge using the current methods. On the basis of experimental and DFT studies, simultaneous addition of glycine α-carbon (Gly) radicals to Ni(0) and Ar–Ni(ii) may occur, with the former being more favored where oxidative addition of a C(sp²) electrophile to the resultant Gly–Ni(i) intermediate gives a key Gly–Ni(iii)–Ar intermediate. The auxiliary chelation of the N-carbonyl oxygen to the Ni center appears to be crucial to stabilize the Gly–Ni(i) intermediate.

We have developed Ni-catalyzed reductive coupling of N-carbonyl protected α-pivaloyloxy glycine with Csp²-electrophiles that enabled facile preparation of α-amino acids, including those bearing hindered branched vinyl groups.     

Synthesis and properties of novel fluorinated epoxy resins based on 1,1-bis(4-glycidylesterphenyl)-1-(3′-trifluoromethylphenyl)-2,2,2-trifluoroethane

A novel fluorinated epoxy resin, 1,1-bis(4-glycidylesterphenyl)-1-(3′-trifluoromethylphenyl)-2,2,2-trifluoroethane (BGTF), was synthesized through a four-step procedure, which was then cured with hexahydro-4-methylphthalic anhydride (HMPA) and 4,4′-diaminodiphenyl-methane (DDM). As comparison, a commercial available epoxy resin, bisphenol A diglycidyl ether (BADGE), cured with the same curing agents was also investigated. We found that the BGTF gave the exothermic starting temperature lower than BADGE no mater what kind of curing agents applied, implying the reactivity of the former is higher than the latter. The fully cured fluorinated BGTF epoxy resins have good thermal stability with glass transition temperature of 170-175 °C and thermal decomposition temperature at 5% weight loss of 370-382 °C in nitrogen. The fluorinated BGTF epoxy resins also showed the mechanical properties as good as the commercial BADGE epoxy resins. The cured BGTF epoxy resins exhibited improved dielectric properties as compared with the BADGE epoxy resins with the dielectric constants and the dissipation factors lower than 3.3 and dissipation 2.8 × 10⁻³, respectively, which is related to the low polarizability of the C-F bond and the large free volume of CF₃ groups in the polymer. The BGTF epoxy resins also gave low water absorption because of the existence of hydrophobic fluorine atom.     

Synthesis and reactivity of 3-(trichlorogermyl)propanoic acid and 3-(triphenylgermyl) propanoic acid

3-(Trichlorogermyl)propanoic acid (la) reacts with phenylmagnesium bromide in malar ratio 1:4 to give 3-(triphenylgermyl)propanoic acid (2a).In the compounds la and 2a theβ-carboxylic functional group shows some unusual properties when they react with excess of phenylmagnesium bromide.The compound la reacts with phenylmagnesium bromide in molar ratio 1:5 to give phenyl 2-(triphenylgermyl)ethylketone (3a) and in molar ratio 1:6 to give l,l-diphenyl-3-(triphenylgermyl)propanol (4a).The compound 2a reacts with phenylmagnesium bromide in molar ratio 1:2 to give 3a and in molar ratio 1:3 to give 4a also.Dehydration of the compound 4a with dilute hydrochloric acid seems especially easy.Moreover,the compound la reacted with phenylmagnsium bromide in molar ratio 1:6,then the mixture was treated with dilute hydrochloric acid to give 1,1-diphenyl-3-(triphenylgermyl)-1-propene (5a) in one pot reaction.Alkyl Ge-C bond in the compound 5a can be cleaved selectively by lithium aluminium hydride ( LiAlH4) in good yiel     

Electronic density of levels in a disordered system

Three-, two-, and one-dimensional disordered systems with randomly distributed, purely repulsive scattering centers, known as Lorentz models, are studied in the low energy limit [1]. Using a functional integral representation and a version of the “replica trick”, we have found in the D-dimensional system the density of electronic levels of the form

$\text{n(E)=b}{}_0\text{Eγ}\text{exp}\text{(?b}{}_1\text{E}{}^{\mathrm{<mtext>?(</mtext><mtext>D</mtext><mtext>2</mtext><mtext>)</mtext>}}\text{+b}{}_2\text{E}{}^{\mathrm{<mtext>?(</mtext><mtext>D</mtext><mtext>2</mtext><mtext>)+1</mtext>}}\text{+·+b}{}_{\mathrm{D}}\text{E}{}^{\mathrm{<mtext>?(</mtext><mtext>1</mtext><mtext>2</mtext><mtext>)</mtext>}}\text{)(1+O(}\text{E}\text{))}$

and the constants b₀, b₁,…, b_D, and γ have been determined.     

Sorption of Th(IV) ions onto TiO2: Effects of contact time, ionic strength, thorium concentration and phosphate

Summary The sorption of Th(IV) onto TiO₂ was studied by the batch technique as a function of pH and ionic strength at moderate concentration (10^-4-10^-5 mol/l) and in the presence and absence of phosphate. It was found that the sorption rate of Th(IV) was relatively slow, the sorption percent was abruptly increased from pH 2 to 4, and the sorption was decreased with increasing ionic strength as a whole. In the concentration range of Th(IV) from trace concentration to 1.4 ^. 10^-4 mol/l and in the absence of phosphate, the sorption isotherms were roughly fitted the Freundlich equation at different ionic strengths and approximately constant pH. These sorption characteristics of Th(IV) onto TiO₂ were compared with those of uranyl on the same sorbent. In addition, the positive effect of phosphate on the sorption of Th(IV) onto TiO₂ was demonstrated obviously and can be attributed to strong surface binding of phosphate, and the subsequent formation of ternary surface complexes of Th(IV). The difference between the sorption characteristics of Th(IV) ions and uranyl ions onto TiO₂ is discussed.     

Two-Dimensional Supramolecular from the Self-Assembly of Dissymmetrical Oxamidato-Bridged Heterometallic Trinuclear Building Blocks: Synthesis, Crystal Structure, and Magnetic Properties

Two heterometallic trinuclear complexes {[Cu(oxbp)]₂Co(H₂O)₂}1.5DMF0.5H₂O (complex 1) and {[Cu(oxbm)]₂Co(H₂O)₂}2DMF (complex 2) were obtained from the self-organization of two new dissymmetrical oxamidato-bridged copper(II) building blocks [Cu(oxbp)]^– and [Cu(oxbm)]^–[H₃oxbp=N-benzoato-N'-(3-aminopropyl)oxamido, H₃oxbm=N-benzoato-N'-(2-amino-2-methylethyl)oxamido, DMF=dimethylformamide]. The crystal structure of complex 1 has been determined. Complex 1 crystallize in triclinic system, space group P-1, a=8.0609(16) Å, b=10.661(2) Å, c=22.279(5) Å, =85.32(3), =86.64(3), =70.90(3), and Z=1. The crystal structure of complex 1 consists of neutral trinuclear complex units, and hydrogen bond involved DMF and water molecules. Through the hydrogen bonds, weak coordination and CuCu weak interactions, complex 1 features a 2-D supramolecular structure. Magnetic susceptibility measurements (5–100 K) indicate that the central Co(II) and terminal copper metal ions are antiferromagnetically coupled with J=–28.09 and J=–29.70 cm^–1 for complex 1 and 2, respectively.     

Preparation and Characterization of Microencapsulated Hexadecane Used for Thermal Energy Storage

Polyurea microcapsules about 2.5μm in diameter containing phase change material for thermal energy storage application were synthesized and characterized by interfacial polycondensation method with toluene-2,4-diisocyanate and ethylenediamine as monomers in an emulsion system. Hexadecane was used as a phase change material and OP, which is nonionic surfactant, and used as an emulsifier. The chemical structure and thermal behavior of the microcapsules were investigated by FTIR and thermal analysis respectively. The results show encapsulated hexadecane has a good potential as a solar energy storage material.     

Highly selective two-photon chemosensors for fluoride derived from organic boranes

[reaction: see text] Three organoboron compounds are shown to be two-photon fluorescent sensors for fluoride anion with high sensitivity and selectivity. The recognition mechanism is attributed to the unique steric structure of the bulky dimesitylboryl group and the Lewis acid-base interaction between trivalent boron atom and fluoride anion.     

锂离子蓄电池正极材料LiFePO4研究进展

锂离子电池正极材料正在向着高比能量、长寿命、低成本、环境友好的方向发展,而具有橄榄石结构的LiFePO_4正极材料以其结构稳定、成本低、无污染等优点成为21世纪最理想的绿色电源,但自身也存在缺点。综述了锂离子电池正极材料LiFePO_4的研究进展。系统地阐述了LiFePO_4的晶体结构特征及性能、多种合成方法以及掺杂多种导电材料和控制晶体生长制备纳米粉体对材料性能的影响。对该材料的应用前景进行了展望,并提出了下一步可能的研究趋势。