Synthesis of proton‐conducting membranes by the utilization of preirradiation grafting and atom transfer radical polymerization techniques

The atom transfer radical polymerization (ATRP) of styrene onto poly(vinylidene fluoride)‐graft‐poly(vinylbenzyl chloride) (PVDF‐g‐PVBC) membranes was investigated. Novel membranes were designed for fuel‐cell applications. The benzyl chloride groups in the PVDF‐g‐PVBC membranes functioned as initiators, and a Cu‐based catalytic system with the general formula Cu(n)X_n/ligand [where X is Cl or Br and the ligand is 2,2′‐bipyridyl (bpy)] was employed for the ATRP. In addition, 10 vol % dimethylformamide was added for increased solubility of the catalyst complex in styrene. The system was homogeneous, except for the membrane, when the initiator/copper halide/ligand/monomer molar ratio was 1/1/3/500. As anticipated, the fastest polymerization rate of styrene was observed with the copper bromide/bpy‐based catalyst system. The reaction rate was strongly temperature‐dependent within the studied temperature interval of 100–130 °C. The degree of grafting increased linearly with time, thereby indicating first‐order kinetics, regardless of the polymerization temperature. Furthermore, 120 °C was the maximum polymerization temperature that could be used in practice because the membrane structure was destroyed at higher temperatures. The degree of styrene grafting reached 400% after 3 h at 120 °C. Such a high degree of grafting could not be reached with conventional uncontrolled radiation‐induced grafting methods because of termination reactions. On the basis of an Arrhenius plot, the activation energy for the homogeneous ATRP of styrene was 217 kJ/mol. The prepared membranes became proton‐conducting after sulfonation of the polystyrene grafts. The highest conductivity measured for the prepared membranes was 70 mS/cm, which is comparable to the values normally measured for commercial Nafion membranes. The scanning electron microscopy/energy‐dispersive X‐ray results showed that the membranes had to be grafted through the matrix with both PVBC and polystyrene to become proton‐conducting after sulfonation. In addition, PVDF‐g‐[PVBC‐g‐(styrene‐block‐tert‐butyl acrylate)] membranes were also synthesized by ATRP. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 591–600, 2002; DOI 10.1002/pola.10146     

Comparison of ALA- and ALA hexyl-ester-induced PpIX depth distribution in human skin carcinoma

Photodynamic therapy (PDT) based on the use of photoactivable porphyrins, such as protoporphyrin IX (PpIX), induced by the topical application of amino-levulinic acid (ALA) or its derivatives, ALA methyl-ester (m-ALA), is a treatment for superficial basal cell carcinoma (BCC), with complete response rates of over 80%. However, in the case of deep, nodular-ulcerative lesions, the complete response rates are lower, possibly related to a lower bioavailability of PpIX. Previous in vitro skin permeation studies demonstrated an increased penetration of amino-levulinic acid hexyl-ester (h-ALA) over ALA. In this study, we tested the validity of this approach in vivo on human BCCs. An emulsion containing 20% ALA (w/w) and preparations of h-ALA at different concentrations were applied topically to the normal skin of Caucasian volunteers to compare the PpIX fluorescence intensities with an optical fiber-based spectrofluorometer. In addition, the PpIX depth distribution and fluorescence intensity in 26 BCCs were investigated by fluorescence microscopy following topical application of 20% ALA and 1% h-ALA. We found that, for application times up to 24h, h-ALA is identical to ALA as a PpIX precursor with respect to PpIX fluorescence intensity, depth of penetration, and distribution in basal cell carcinoma, but has the added advantage that much smaller h-ALA concentrations can be used (up to a factor 13). We observed a non-homogenous distribution in BCCs with both precursors, independent of the histological type and depth of invasion in the dermis.     

Investigation of solid phase upon γ-irradiation of ferrihydrite-ethanol suspension

Ferrihydrite (FH) nanoparticles were synthesised and subjected to γ-irradiation in the form of FH-ethanol suspension. The dose rate of γ-radiation was ～16 kGy/h and the samples were irradiated to doses of up to 2590 kGy. γ-irradiation of FH-ethanol suspensions did not cause the transformation of FH to any of the other iron oxide phases. Likewise, neither the Mössbauer and FT-IR spectroscopy nor the quantitative analysis using Energy Dispersive X-ray Spectroscopy gave any evidence of structural changes of FH upon γ-irradiation. C, H analysis showed that the C concentration in FH gradually increased with dose and was higher in γ-irradiated FH samples than in non-irradiated FH sample. This finding suggested that carbon in FH originated from ethanol degradation. The H concentration in FH gradually increased to the dose of up to 340 kGy and then slightly decreased. Magnetic measurements showed a progressive decrease in magnetisation with an increase in γ-irradiation. The results of magnetic measurements and C, H analysis suggested the carbonisation of FH surface. It was supposed that γ-irradiation of FH-ethanol suspension reductively decomposed ethanol thus generating unsaturated hydrocarbons and acetylides, which in turn formed a conjugate iron complex, thus carbonating the FH surface. The carbonisation of the FH surface prevented FH transformation to other iron oxide phases.     

Development of a novel,fast, simple,nonderivative HPLC method with direct UV measurement for quantification of memantine hydrochloride in tablets

Fast, simple, accurate, and reproducible reverse phase‐high‐performance liquid chromatography method with direct ultraviolet measurement of memantine hydrochloride in tablets was developed, without any chemical derivatization pretreatment. Three main problems appear during chromatographic analysis of memantine: detection, achieving appropriate column retention, and limited choice of mobile phase components, as a result of memantine molecular structure. Among more than 35 tested columns, the best retention and peak symmetry yielded two C8 and three C18 columns with different characteristics, at a temperature of 30°C, mobile phase composed of 1%, v/v, acetonitrile and 99%, v/v, of 0.05–0.1% phosphoric acid or 2.5–5 mmol phosphate buffer, at flow rate of 1 mL/min and injection volume of 5 µL. The retention time of memantine was between 2.6 and 4 min. Both mobile phase concepts showed perfect linearity, precision, and accuracy. This is the first successful and reproducible direct reverse phase‐high‐performance liquid chromatography–ultraviolet quantification method for memantine.     

Photophysical properties of Kuratowski-type coordination compounds [M(II)Zn4Cl4(Me2bta)6] (M(II) = Zn or Ru) featuring long-lived excited electronic states

The syntheses of Kuratowski-type pentanuclear clusters featuring {MZn(4)Cl(4)} cores (M(II) = Ru or Zn) that incorporate triazolate ligands are described. The coordination compounds are characterized by single-crystal X-ray diffraction, X-ray powder diffraction (XRD), FTIR- and UV-vis spectroscopy. [Ru(II)Zn(4)Cl(4)(Me(2)bta)(6)]·2DMF (Me(2)bta(-) = 5,6-dimethyl-1,2,3-benzotriazolate) (1) crystallizes in the cubic system, while [Zn(5)Cl(4)(ta)(6)] (ta(-) = 1,2,3-triazolate) (3) crystallizes in the tetragonal system. Both compounds feature structurally similar cluster topologies in which the central octahedrally coordinated metal ion is coordinated to six triazolate ligands. Each triazolate ligand is coordinated with two zinc ions (μ(3)-bridging mode), leading altogether to a pentanuclear cluster of T(d) point group symmetry. Photophysical investigations reveal that compound [Zn(5)Cl(4)(Me(2)bta)(6)]·2DMF (2) shows a short-lived excited electronic state, which can be populated with high quantum yield. The isostructural compound [Ru(II)Zn(4)Cl(4)(Me(2)bta)(6)]·2DMF (1), on the other hand, shows a long-lived photoexcited state, owing to an internal singlet to triplet conversion of the electronic states, as revealed by time-resolved fluorescence spectroscopy. Insights gained from these studies open up novel design strategies towards photocatalytically active metal-organic frameworks incorporating photoactive Kuratowski-type secondary building units such as MFU-4 (Metal-Organic Framework Ulm University-4).     

Deconstructing Oligomer Distributions: Discrete Species and Artificial Distributions

The separation of an oligo(methyl acrylate) distribution, obtained from reversible addition–fragmentation chain transfer (RAFT) polymerization, in a discrete (dispersity=1) oligomeric library (degree of polymerization between 1 and 22) is presented. The properties of this library in terms of diffusivity, glass transition temperature, and viscosity are determined, filling a significant knowledge gap associated with these materials. The obtained oligomer library is used to construct artificial oligomer distributions on demand. These artificial oligomer distributions are used to highlight the potential to tailor physical properties of a material, while concomitantly demonstrating the limitations associated with size‐exclusion chromatography analysis of molecular weight and dispersity in particular.     

Electrospray mass spectrometric studies of a potential antitumor drug and its analogous platinum(II) and platinum(IV) complexes with the ethylenediamine-N,N′-di-3-propanoato ligand and its dibutyl ester

Abstract  The electrospray mass spectrometric (ESI–MS) behavior of the complexes trans-dichloro(ethylenediamine-N,N′-di-3-propionato)platinum(IV), trans-dibromo(ethylenediamine-N,N′-di-3-propionato)platinum(IV), dichloro(ethylenediamine-N,N′-di-3-propionic acid)platinum(II), tetrachloro(O,O′-di-n-butyl-ethylenediamine-N,N′-di-3-propanoate)platinum(IV), chlorotribromo(O,O′-di-n-butyl-ethylenediamine-N,N′-di-3-propanoate)platinum(IV), and dichloro(O,O′-di-n-butyl-ethylenediamine-N,N′-di-3-propanoate)platinum(II), with the formulae trans-[PtCl₂(eddp)] (1), trans-[PtBr₂(eddp)] (2), [PtCl₂(H₂eddp)] (3), [PtCl₄(Bu₂eddp)] (4), [PtBr₃Cl(Bu₂eddp)] (5), and [PtCl₂(Bu₂eddp)]·H₂O (6), is reported. The deprotonated molecular ions or halide adducts are usually observed. ESI–MS data demonstrate the usefulness of the method for efficient characterization of metal complexes in solution. Graphical Abstract        

Cacaoidin,First Member of the New Lanthidin RiPP Family

Lantibiotics are ribosomally synthesized and post-translationally modified peptides (RiPPs) characterized by the presence of lanthionine or methyllanthionine rings and their antimicrobial activity. Cacaoidin, a novel glycosylated lantibiotic, was isolated from a Streptomyces cacaoi strain and fully characterized by NMR, mass spectrometry, chemical derivatization approaches and genome analysis. The new molecule combines outstanding structural features, such as a high number of d -amino acids, an uncommon glycosylated tyrosine residue and an unprecedented N,N-dimethyl lanthionine. This latter feature places cacaoidin within a new RiPP family located between lanthipeptides and linaridins, here termed lanthidins. Cacaoidin displayed potent antibacterial activity against Gram-positive pathogens including Clostridium difficile. The biosynthetic gene cluster showed low homology with those of other known lanthipeptides or linaridins, suggesting a new RiPP biosynthetic pathway.     

DNA–Polymer Nanostructures by RAFT Polymerization and Polymerization‐Induced Self‐Assembly

Nanostructures derived from amphiphilic DNA–polymer conjugates have emerged prominently due to their rich self‐assembly behavior; however, their synthesis is traditionally challenging. Here, we report a novel platform technology towards DNA–polymer nanostructures of various shapes by leveraging polymerization‐induced self‐assembly (PISA) for polymerization from single‐stranded DNA (ssDNA). A “grafting from” protocol for thermal RAFT polymerization from ssDNA under ambient conditions was developed and utilized for the synthesis of functional DNA–polymer conjugates and DNA–diblock conjugates derived from acrylates and acrylamides. Using this method, PISA was applied to manufacture isotropic and anisotropic DNA–polymer nanostructures by varying the chain length of the polymer block. The resulting nanostructures were further functionalized by hybridization with a dye‐labelled complementary ssDNA, thus establishing PISA as a powerful route towards intrinsically functional DNA–polymer nanostructures.     

Defect Engineering of Two-Dimensional Molybdenum Disulfide

Two-dimensional (2D) molybdenum disulfide (MoS₂) holds great promise in electronic and optoelectronic applications owing to its unique structure and intriguing properties. The intrinsic defects such as sulfur vacancies (SVs) of MoS₂ nanosheets are found to be detrimental to the device efficiency. To mitigate this problem, functionalization of 2D MoS₂ using thiols has emerged as one of the key strategies for engineering defects. Herein, we demonstrate an approach to controllably engineer the SVs of chemically exfoliated MoS₂ nanosheets using a series of substituted thiophenols in solution. The degree of functionalization can be tuned by varying the electron-withdrawing strength of substituents in thiophenols. We find that the intensity of 2LA(M) peak normalized to A_1g peak strongly correlates to the degree of functionalization. Our results provide a spectroscopic indicator to monitor and quantify the defect engineering process. This method of MoS₂ defect functionalization in solution also benefits the further exploration of defect-free MoS₂ for a wide range of applications.