Colloids for Catalysts: A Concept for the Preparation of Superior Catalysts of Industrial Relevance

Compared to conventional preparation methods for supported heterogeneous catalysts, the use of colloidal nanoparticles (NPs) allows for a precise control over size, size distribution, and distribution/location of the NPs on the support. However, common colloidal syntheses have restrictions that limit their applicability for industrial catalyst preparation. We present a simple, surfactant‐free, and scalable preparation method for colloidal NPs to overcome these restrictions. We demonstrate how precious‐metal NPs are prepared in alkaline methanol, how the particle size can be tuned, and how supported catalysts are obtained. The potential of these colloids in the preparation of improved catalysts is demonstrated by two examples from heterogeneous catalysis and electrocatalysis.     

Stimulus‐Triggered Formation of an Anion–Cation Exciplex in Copper(I) Complexes as a Mechanism for Mechanochromic Phosphorescence

The investigation of the mechanisms of mechanochromic luminescence is of fundamental importance for the development of materials for photonic sensors, data storage, and luminescence switches. The structural origin of this phenomenon in phosphorescent molecular systems is rarely known and thus the formulation of structure–property relationships remains challenging. Changes in the M–M interactions have been proposed as the main mechanism with d¹⁰ coinage metal compounds. Herein, we describe a new mechanism—a mechanically induced reversible formation of a cation–anion exciplex based on Cu–F interactions—that leads to highly efficient mechanochromic phosphorescence and unusual large emission shifts from UV‐blue to yellow for Cu^I complexes. The low‐energy luminescence is thermo‐ and vaporesponsive, thus allowing the generation of white light as well as for recovering the original UV‐blue emission.     

Ge14Br8(PEt3)4: A Subhalide Cluster of Germanium

Heating a metastable solution of Ge^IBr to room temperature led to the first structurally characterized metalloid subhalide cluster Ge₁₄Br₈(PEt₃)₄ ( 1 ). Furthermore 1 can be seen as the first isolated binary halide cluster on the way from Ge^IBr to elemental germanium, giving insight into the complex reaction mechanism of its disproportionation reaction. Quantum chemical calculations further indicate that a classical bonding situation is realized within 1 and that the last step of the formation of 1 might include the trapping of GeBr₂ units.     

Calculation of vibrational spectra of linear tetrapyrroles. 3. Hydrogen-bonded hexamethylpyrromethene dimers

The structure and vibrational spectra of hexamethylpyrromethene (HMPM) have been investigated by X-ray crystallography, IR and Raman spectroscopies, and density functional theory calculations. HMPM crystallizes in the form of dimers, which are held together by bifurcated N-H(...N)(2) hydrogen bonds, involving one intramolecular and one intermolecular N-H...N interaction. The monomers are essentially planar, and the mean planes of the monomers lie approximately perpendicular to one another, so that the four N atoms in the dimer form a distorted tetrahedron. The structure of the HMPM dimer is well-reproduced by B3LYP/6-31G calculations. A comparison of the calculated geometry of the dimer with that of the monomer reveals only small changes in the N-H...N entity and the methine bridge angles upon dimerization. These are a result of weakening of the intramolecular N-H...N hydrogen bond and the formation of a more linear N-H...N intermolecular hydrogen bond. Using an empirical relation between the shift of the N-H stretching frequency of pyrrole and the enthalpy of adduct formation with bases [Nozari, M. S.; Drago, R. S. J. Am. Chem. Soc. 1970, 92, 7086-7090], estimates of the strength of the intra- and intermolecular hydrogen bonds are obtained. IR and Raman spectroscopies of HMPM and its isotopomers deuterated at the pyrrolic nitrogen atom and at the methine bridge reveal that the molecule is monomeric in nonpolar organic solvents but dimeric in a solid Ar matrix and in KBr pellets. The matrix IR spectra show a splitting of vibrational modes for the dimer, particularly those involving the N-H coordinates. Due to intrinsic deficiencies of the B3LYP/6-31G approximation, a satisfactory reproduction of these modes of the monomeric and dimeric HMPM requires specific adjustments of the NH scaling factors for the calculated force constants and, in the case of the NH out-of-plane modes of HMPM dimers, also of intra- and intermolecular coupling constants. This parametrization does not significantly affect the other calculated modes, which in general reveal a very good agreement with the experimental data.     

Column liquid chromatography coupled on-line with mass spectrometry using post-column phosphate suppression

The coupling of column liquid chromatography on-line with mass spectrometry using post-column phosphate suppression is described. A membrane suppressor is used to remove the non-volatile phosphate ions from the mobile phase after the chromatographic separation prior to introduction into the mass spectrometer. Using post-column phosphate suppression by a membrane device phosphate concentrations up to 10 mM phosphate, at a mobile phase flow rate of 0.1 ml/min, could be removed for more than 99% without any decay of the sensitivity of the MS detection. Using a new antidepressant tetracyclic basic compound, ORG 4428, and some structure related compounds as model compounds electron impact as well as chemical ionisation spectra of all compounds could be obtained. The set-up could be used for several weeks running, using a phosphate containing mobile phase, without any loss of performance.     

Synthesis of proton‐conducting membranes by the utilization of preirradiation grafting and atom transfer radical polymerization techniques

The atom transfer radical polymerization (ATRP) of styrene onto poly(vinylidene fluoride)‐graft‐poly(vinylbenzyl chloride) (PVDF‐g‐PVBC) membranes was investigated. Novel membranes were designed for fuel‐cell applications. The benzyl chloride groups in the PVDF‐g‐PVBC membranes functioned as initiators, and a Cu‐based catalytic system with the general formula Cu(n)X_n/ligand [where X is Cl or Br and the ligand is 2,2′‐bipyridyl (bpy)] was employed for the ATRP. In addition, 10 vol % dimethylformamide was added for increased solubility of the catalyst complex in styrene. The system was homogeneous, except for the membrane, when the initiator/copper halide/ligand/monomer molar ratio was 1/1/3/500. As anticipated, the fastest polymerization rate of styrene was observed with the copper bromide/bpy‐based catalyst system. The reaction rate was strongly temperature‐dependent within the studied temperature interval of 100–130 °C. The degree of grafting increased linearly with time, thereby indicating first‐order kinetics, regardless of the polymerization temperature. Furthermore, 120 °C was the maximum polymerization temperature that could be used in practice because the membrane structure was destroyed at higher temperatures. The degree of styrene grafting reached 400% after 3 h at 120 °C. Such a high degree of grafting could not be reached with conventional uncontrolled radiation‐induced grafting methods because of termination reactions. On the basis of an Arrhenius plot, the activation energy for the homogeneous ATRP of styrene was 217 kJ/mol. The prepared membranes became proton‐conducting after sulfonation of the polystyrene grafts. The highest conductivity measured for the prepared membranes was 70 mS/cm, which is comparable to the values normally measured for commercial Nafion membranes. The scanning electron microscopy/energy‐dispersive X‐ray results showed that the membranes had to be grafted through the matrix with both PVBC and polystyrene to become proton‐conducting after sulfonation. In addition, PVDF‐g‐[PVBC‐g‐(styrene‐block‐tert‐butyl acrylate)] membranes were also synthesized by ATRP. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 591–600, 2002; DOI 10.1002/pola.10146     

Effective intraparticle diffusion coefficients of CoCl2 in mesoporous functionalized silica adsorbents

The scope of this work is to determine the effective intraparticle diffusion coefficient of CoCl₂ over mesoporous functionalized silica. Silica is selected as a carrier of the functionalized groups for its rigid structure which excludes troublesome swelling, often found in polymeric adsorbents. 2-(2-pyridyl)ethyl-functionalized silica is selected as a promising affinity adsorbent for the reversible adsorption of CoCl₂. The adsorption kinetics is investigated with the Zero Length Column (ZLC) method. Initially, experiments were performed at different flow rates to eliminate the effect of external mass transfer. The effect of pore size (60 Å and 90 Å), particle size (40?10^?6 m–1000?10^?6 m) and initial CoCl₂ concentration (1 mol/m³–2.0 mol/m³) on the mass transfer was investigated. A model was developed to determine the pore diffusion coefficient of CoCl₂ by fitting the experimental data to the model. The pore diffusion coefficients determined for two different pore sizes of silica are D _p (60 Å) =1.95?10^?10 [m²/s] and D _p (90 Å) =5.8?10^?10 [m²/s]. The particle size and the initial CoCl₂ concentration do not have an influence on the value of diffusion coefficient. However, particle size has an influence on the diffusion time constant. In comparison with polymer adsorbents, silica based adsorbents have higher values of diffusion coefficients, as well as a more uniform and stable pore structure.     

A tripod ligand as new sensitiser for the enzyme amplified lanthanide luminescence determination of esterase

Screening of a small library of tripod ligands resulted in the discovery of bis(2-pyridylmethyl)-(2-hydroxybenzyl)amine (HL1) as a new sensitiser, which is able to transfer its excitation energy to terbium(III). After synthesis of the acetic acid ester of HL1, a highly selective method for the determination of porcine liver esterase by means of enzyme amplified lanthanide luminescence (EALL) was developed. Enzyme-catalysed cleavage of the ester results in the formation of HL1. After excitation at 297 nm, the characteristic emission of Tb(III) at 545 nm is observed and used to determine the esterase concentration. In contrast to existing EALL methods, this method may be carried out at neutral pH and without further additives. Limit of detection for porcine liver esterase is 10(-9) mol l(-1) and limit of quantification is 3 x 10(-9) mol l(-1). A linear calibration range of two decades starting at the limit of quantification is observed.     

Energy transfer rates and pathways of single donor chromophores in a multichromophoric dendrimer built around a central acceptor core

An artificial light-harvesting dendrimer showing highly efficient electronic excitation energy transfer from four peripheral donors to one central acceptor has been investigated by single-molecule spectroscopy at low temperatures. Confocal imaging in combination with frequency selective excitation spectroscopy gives direct access to energy transfer rates of individual donors and allows the determination of energy transfer pathways within a single multichromophoric aggregate.     

Stereoselective synthesis of novel benzoins catalysed by benzaldehyde lyase in a gel-stabilised two-phase system

Asymmetric benzoin condensation was performed using recombinant benzaldehyde lyase (BAL) from Pseudomonas fluorescens Biovar I. To enable the conversion of hydrophobic substrates, the enzyme was entrapped in polyvinyl alcohol and suspended in hexane. Compared to the reported application of the biocatalyst in an aqueous phase containing 20% DMSO, the productivity of the resulting gel-stabilised two-phase system was 3-fold better. The entrapment process had an efficiency of >90%, no enzyme or cofactor was lost during reaction or storage. The entrapped enzyme was stable in hexane for 1 week at 4 °C and more than 1 month at −20 °C. Without preceding optimisation the novel benzoins (R)-1,2-di(3-furanyl)-2-hydroxyethanone, (R)-2-hydroxy-1,2-di(3-thienyl) ethanone, (R)-1,2-di(4-ethoxyphenyl)-2-hydroxyethanone, (R)-1,2-di(3-ethoxyphenyl)-2-hydroxyethanone, (R)-2-hydroxy-1,2-di(3-tolyl)ethanone, and (R)-1,2-di(benzofuran-2-yl)-2-hydroxyethanone were prepared with yields up to 31.8% and enantiomeric excess >99%.