Binding, aggregation and photochemical properties of methylene blue in mitochondrial suspensions

Methylene Blue (MB) has well-established photochemical properties and has been used in a variety of photochemical applications including photodynamic therapy. Despite the fact that most of MB's cytotoxic effects in cells are attributed to mitochondrial damage, the interactions of this dye with mitochondria and the consequent effects on photochemical properties have not yet been fully determined. We monitored MB binding, aggregation and its ability to release singlet oxygen (1O2) on irradiation when interacting with mitochondrial suspensions. MB actively binds to mitochondria and enters the matrix in a manner stimulated by the mitochondrial proton potential and by the increase in mitochondrial concentrations. The greater accumulation of MB in mitochondria with elevated proton potentials or those treated with high concentrations of MB results in the formation of MB dimers, previously shown to be less effective generators of 1O2. Accumulation of MB within mitochondria with high membrane potentials also results in the reduction of MB to the photochemically inactive leuco-MB. Indeed, irradiation of mitochondria with high proton potentials in the presence of MB results in the generation of approximately half the quantity of 1O2 compared with 1O2 generated in mitochondria with low proton potentials. These differences in photochemical properties should influence the cytotoxic effects of photodynamic treatment in the presence of MB.     

Versatility of tandem mass spectrometry for focused analysis of oxylipids

Liquid chromatography‐tandem mass spectrometry (LC‐MS/MS) in the multiple reaction monitoring (MRM) scan mode has been the primary MS method applied for the target identification of specific and minor oxylipids in complex matrices, such as eicosanoids and docosanoids, which are potent lipid mediators derived from polyunsaturated fatty acid oxygenation. However, the high specificity of MRM can limit the detection of species with m/z MRM transitions not covered by the method. In addition to MRM, tandem‐quadrupole mass analyzers enable other experiments to be conducted, by fragmenting ions via collision‐induced dissociation process (CID). This paper presents the potential of tandem mass spectrometry for the focused analysis of oxylipids. We have successfully developed an LC‐MS/MS method for the identification of precursor ions of m/z 115, a diagnostic product ion of 5‐hydroxy‐ and 5‐epoxy‐fatty acids. As a proof of concept, the developed method was used to discover several oxylipids oxidized at C5 derived from arachidonic acid (C20 : 4) oxygenation in a hypothalamus rat extract that were not identified using the target MRM methodology. The proposed focused MS/MS‐based approach in a tandem mass analyzer has proven to be a powerful strategy to accelerate the identification of oxylipids with structural similarities and assist the field of lipidomic research. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoinduced Charge Separation in a Donor–Spacer–Acceptor Dyad with N‐Annulated Perylene Donor and Methylviologen Acceptor

The first donor–acceptor species in which a strongly emissive N‐annulated perylene dye is connected to a methylviologen electron acceptor unit via its macrocyclic nitrogen atom, is prepared by a stepwise, modular procedure. The absorption spectra, redox behavior, spectroelectrochemistry and photophysical properties of this dyad and of its model species are investigated, also by pump–probe fs transient absorption spectroscopy. Photoinduced oxidative electron transfer from the excited state of the dyad, centered on the N‐annulated perylene subunit, to the appended methyviologen electron acceptor takes place in a few ps. The charge‐separated species recombines in 19 ps. Our results indicate that N‐annulated perylene can be connected to functional units by taking advantage of the macrocyclic nitrogen, an option never used until now, without losing their properties, so opening the way to new designing approaches.     

Complexes of Crown Ether‐Containing N‐Phosphorylated Thioamides and Thioureas with CoII,ZnII and PdII Cations

The reaction of the potassium salts of N‐phosphorylated thioureas [4′‐benzo‐15‐crown‐5]NHC(S)NHP(Y)(OiPr)₂ (Y = S, HL^I ; Y = O, HL^II ) with Zn^II and Co^II cations in aqueous EtOH leads to complexes of formulae Zn(L^I,II‐S,Y)₂ (Y = S, 1 ; Y = O, 2 ) and Co(L^I‐S,S′)₂ ( 3 ), while interaction of the potassium salt of N‐phosphorylated thioamide [4′‐benzo‐15‐crown‐5]C(S)NHP(O)(OiPr)₂ ( HL^III ) with Zn^II in the same conditions leads to the complex Zn(HL^III)(L^III‐S,O)₂ ( 4 ). The reaction of the potassium salt of crown ether‐containing N‐phosphorylated bis‐thiourea N,N′‐[C(S)NHP(O)(OiPr)₂]₂‐1,10‐diaza‐18‐crown‐6 ( H₂L ) with Co^II, Zn^II and Pd^II cations in anhydrous CH₃OH leads to complexes M₂(L‐O,S)₂ (M = Co, 5 ; Zn, 6 ; M = Pd, 7 ). Thioamide HL^III was investigated by single‐crystal X‐ray diffraction.     

Qualification of pipe-grade HDPEs: Part I,development of a suitable accelerated ageing method

Several techniques of polymer characterization and different ageing methods have been used with the aim of developing a simple, fast and reliable method to qualify commercial pipe-grade polyethylene samples, and possibly to evidence the presence of recycled PE within PE pipes. The results of the different techniques used have been compared with respect to their capability to evidence differences in the degradation rate of different HDPE samples (including virgin HDPE, HDPE pipes obtained from virgin HDPE and HDPE pipes that probably contain recycled HDPE). FT-IR, TGA and DSC were found unsuitable for this purpose but, on the contrary, MFI measurements have been found sensitive enough to evidence different degradation rates when a suitable combination of high temperature, oxygen, mechanical stresses and mixing time had been used for ageing the sample.     

Floccosic Acid,a New Triterpenic Acid from Nepeta floccosa

The isolation and structure elucidation of a new triterpenic acid named floccosic acid ( 1 ) is reported on the basis of the 1D‐ and 2D‐NMR assignments. This secondary metabolite was isolated as a new constituent, along with the known triterpenoids, betulinic acid and β‐amyrin. All these compounds were purified by repeated column chromatography of the MeOH extract of Nepeta floccosa. The structure elucidation of the new compound was accomplished by the combined mass spectrometry (MS), infrared (IR) and ultraviolet (UV) absorption spectroscopy, one‐ (¹H‐ and ¹³C‐) and two‐dimensional (H? C correlations; HMBC and HSQC) NMR techniques. The known compounds were identified by comparison of their physical and spectroscopic data with those reported in the literature.     

Synthesis,Characterization, and Biological Activity of the Schiff Base and Its Ni(II), Cu(II), and Zn(II) Complexes Derived from 4-(Dimethylamino)benzaldehyde and S-Benzyldithiocarbazate

Russian Journal of General Chemistry - A Schiff base containing the nitrogen-sulfur donor chain [(CH3)2N-C6H4-CH=N-NH-C(S)-SCH2C6H5] was prepared by the condensation of...     

Chemisorption and thermodynamic data of the interaction between a chelate free acidic center with basic groups attached to grafted silicas

The molecule 2-aminoethanethiol was added to the grafted silylant agent [(3-chlorosilylpropyl)trimethoxysilane] (cpts) onto silica gel(triple bond SilCl), obtaining a surface (triple bond SilSNH(2)) and giving 0.70 mmol g(-1) of nitrogen; the surface of silica was modified with [(3-mercaptosilylpropyl)trimethoxysilane] (mpts) with surface (triple bond SilSH), giving 0.78 mmol g(-1) of sulphur. Both matrices, (triple bond SilSNH(2)) and (triple bond SilSH), adsorb copper and cobalt acetylacetonates from ethanolic solution. Adsorption, using a batchwise process, showed that copper chelate was the most adsorbed. The interactions between the basic centers attached to organic chains of these modified silicas with the cations in the chelates Me(acac)(2) [M=Cu and Co] were followed through calorimetric titrations. Exothermic enthalpic results were obtained for the triple bond SilSNH(2) matrix. The spontaneity of these systems was reflected in negative free Gibbs energy and positive from entropic values.     

Trifluoroethanol: key solvent for palladium-catalyzed polymerization reactions

A series of cationic palladium complexes of general formula [Pd(CH₃)(NCCH₃)(N-N)][X] (N-N = phen 1, 3-sec-butyl-1,10-phenanthroline (3-sBu-phen) 2, bpy 3, (−)-(S,S)-3,3′-(1,2-dimethylethylenedioxy)-2,2′-bipyridine (bbpy) 4, (+)-(R)-3,3′-(1-methylethylenedioxy)-2,2′-bipyridine (pbpy) 5, N,N′-bis(2,6-diisopropylphenyl)-2,3-butanediimine (iso-DAB) 6; , OTf (OTf = triflate) b) containing different nitrogen-donor ligands were prepared from the corresponding neutral chloro derivatives [Pd(CH₃)(Cl)(N-N)] (1c-6c). They were characterized by ¹H NMR spectroscopy and elemental analysis. Single crystals suitable for X-ray determination were obtained for complexes [Pd(CH₃)(NCCH₃)(bbpy)][PF₆] (4a), [Pd(CH₃)(NCCH₃)(iso-DAB)][PF₆] (6a) and [Pd(Cl)₂(bbpy)] (4c′). The latter is the result of an exchange reaction of the methyl group, present in complex 4c, with a chloride, that occurred after dissolution of 4c in CDCl₃, for 1 week at 0 °C. The catalytic behavior of complexes 1a-5a and 1b-5b in the CO/styrene copolymerization was studied in CH₂Cl₂ and 2,2,2-trifluoroethanol (TFE) evidencing the positive effect of the fluorinated alcohol both in terms of productivity and molecular weight values of the polymers obtained. Influence of the nitrogen ligand, the anion and the reaction time in both solvents were investigated and is discussed in detail. Encouraging preliminary results were also obtained in the synthesis of polyethylene, in TFE, catalyzed by [Pd(CH₃)(NCCH₃)(iso-DAB)][PF₆] (6a).     

Characterization of the deposition of organic molecules at the surface of gold by the electrochemical reduction of aryldiazonium cations

The deposition of 4-X phenyl groups (X = NO2, COOH, N-(C2H5)2) on polycrystalline gold electrode was achieved by the electrochemical reduction of the corresponding 4-substituted phenyldiazonium tetrafluoroborate salts in anhydrous acetonitrile media. The electrochemical quartz crystal microbalance measurements evidenced a two-step deposition process: the first one is the deposition of close to a monolayer and the second one is the relatively slower growth of multilayers. In this second region, the deposition is less efficient than for the first one. The electrochemical behavior of the resulting modified gold electrode was investigated in the presence of an electroactive redox probe and these results, together with the electrochemical quartz crystal microbalance data, demonstrated significant differences in reactivity and in deposition efficiency between the diazonium salts. The characterization of the modified electrodes by cyclic voltammetry and electrochemical impedance spectroscopy, as well as X-ray photoelectron spectroscopy measurements, showed that the formation of multilayers is possible and that a significant fraction of the deposited material remained at the electrode surface, even following ultrasonic treatment. The X-ray photoelectron spectroscopy data indicate that the existence of Au-C and Au-N=N-C linkages (where C represents a carbon atom of the phenyl group) is uncertain. Nonetheless, the deposition of the aryl groups by electrochemical reduction of diazonium cations yielded a film that adheres well to the gold surface and the deposited organic film hindered gold oxides formation in acidic medium.