Near-infrared laser photoacoustic detection of methane: the impact of molecular relaxation

A photoacoustic sensor has been developed for trace-gas monitoring using a near-infrared semiconductor laser emitting in the 2ν₃ band of methane at 1.65 μm. The apparatus was designed for on-line process control in the manufacturing of the novel low-water-peak fibres developed for optical telecommunications. The importance of collisional relaxation processes in the generation of the photoacoustic signal is reported in the particular case of CH₄ detection in dry O₂ and O₂–N₂ mixtures. The negative influence of these effects results in a strongly reduced and phase-shifted photoacoustic signal, induced by a fast resonant coupling between the vibrational states of methane and oxygen, associated with the slow relaxation of the excited oxygen molecules. An unusual parabolic response of the sensor with respect to the methane concentration has been observed and is discussed. Finally, the beneficial effect of several species, including water vapour and helium, acting as a catalyst to hasten the relaxation of the CH₄–O₂ system, is demonstrated. PACS 42.62.Fi; 33.20.Ea; 34.50.Ez     

Higher-Order Simple Lie Algebras

It is shown that the non-trivial cocycles on simple Lie algebras may be used to introduce antisymmetric multibrackets which lead to higher-order Lie algebras, the definition of which is given. Their generalised Jacobi identities turn out to be satisfied by the antisymmetric tensors (or higher-order “structure constants”) which characterise the Lie algebra cocycles. This analysis allows us to present a classification of the higher-order simple Lie algebras as well as a constructive procedure for them. Our results are synthesised by the introduction of a single, complete BRST operator associated with each simple algebra. Received: 3 June 1996 / Accepted: 8 November 1996     

Structural morphology of poly(styrene)-poly(butyl acrylate) polymer-polymer composites studied by dynamic mechanical measurements

The emulsion polymerization process allows production of polymer particles with different structural morphologies. Films obtained after coalescence keep some memory of this morphology, but large modifications can occur during coalescence. In the present case, one of the polymers, polystyrene (PS), exhibits a glass temperature (Tg) much higher than the filmification temperature (close to room temperature), while the other one, poly(butyl acrylate) (PBA), has a much lowerTg. Furthermore, it is well known that dynamic mechanical measurements can be very helpful in providing information on the morphology of polymer materials, i.e., on geometrical and topological arrangement of homopolymer domains. At first, this method was used for comparison of two types of films: i) the first one obtained from structured-core (PS)-shell (PBA) particles, ii) the second one obtained from a blend of homopolymer particles (PS and PBA). It appears that the expected core-shell particles lost their geometric structure in the second film. Second, comparison of the predicted dynamic modulus and experimental data shows that i) strong interactions exist between PS nodules unless their coalescence has occured, leading to an abnormally high modulus at room temperature, ii) after achieving their coalescence, PS forms a more or less continuous phase. Both phenomena strongly depend on the particle size and their respective volume fractions.     

Mimicking catalase and catecholase enzymes by copper(II)-containing complexes

An imidazolate-bridged copper(II)-zinc(II) complex (Cu(II)-diethylenetriamino-μ-imidazolato-Zn(II)-tris(2-aminoethyl)amine perchlorate (denoted as “Cu,Zn complex”) and a simple copper(II) complex (Cu(II)-tris(2-aminoethyl) amine chloride (“Cu-tren”) were prepared and immobilised on silica gel (by hydrogen or covalent bonds) and montmorillonite (by ion exchange). The immobilised substances were characterised by FT-IR spectroscopy and their thermal characteristics were also studied. The obtained materials were tested in two probe reactions: catalytic oxidation of 3,5-di-tert-butyl catechol (DTBC) (catecholase activity) and the decomposition of hydrogen peroxide (catalase activity). It was found that the catecholase activity of the Cu,Zn complex increased considerably upon immobilization on silica gel via hydrogen bonds and intercalation by ion exchange among the layers of montmorillonite. The imidazolate-bridged copper(II)-zinc(II) complex and its immobilised versions were inactive in hydrogen peroxide decomposition. The Cu(II)-tris(2-aminoethyl)amine chloride complex displayed good catalase activity; however, immobilisation could not improve it.     

Preperfect graphs

We say that a vertexx of a graph is predominant if there exists another vertexy ofG such that either every maximum clique ofG containingy containsx or every maximum stable set containingx containsy. A graph is then called preperfect if every induced subgraph has a predominant vertex. We show that preperfect graphs are perfect, and that several well-known classes of perfect graphs are preperfect. We also derive a new characterization of perfect graphs.     

Temperature dependence of the iron hyperfine field distribution in amorphous Fe-rich Fe-Zr alloys

The temperature dependence of the iron hyperfine field distribution is reported in melt-quenched amorphous Fe-Zr alloys. The most remarkable feature is the compositinal change in the shape of the average hyperfine field versus temperature curves. The unusual increase in the average hyperfine field below about 85 K is a characteristic feature of the RSG systems; however, no anomaly is observed in the width of the hyperfine field distribution as a function of temperature. The results cannot be properly explained in the framework of the existing spin glass models.     

Sample preparation procedure for the determination of sulphur and trace metals in oil products by the ICP with a minitorch using emulsions

A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with low sulphur content, the other sulfonated). Aqueous standard solutions can be used for the preparation of calibration solutions. The contents of S, Al, Cr, Cu, Fe, Mg, Ni and Pb in aqueous emulsions were determined and the results were in good agreement with the composition of oil standard solutions used for control analysis procedure.     

Synthesis and functional properties of thermosensitive polymer derivatives of proteins

N,N-Diethylacrylamide-N-acryloylphthalimide copolymers have been synthesized. The LCST of the synthesized copolymers decreases with increase in both the molecular mass of the copolymers and the content of more hydrophobic N-acryloylphthalimide units. Through the reaction of the copolymers with the proteinase enzyme inhibitor, ovomucoid, the polymer derivatives of protein have been prepared. It has been shown that the biological activity of ovomucoid and the LCST of polymer derivatives increase with the amount of the immobilized ovomucoid. The effect of biologically active media on the LCST values of polymer derivatives has been studied.