Combining a Magnetic Field Modulation Coil with a Surface-Coil-Type EPR Resonator

It is thought that the design of magnetic field modulation coils is one of the factors limiting enlargement of the sample size in electron paramagnetic resonance (EPR) measurements. In this study, we miniaturized the magnetic field modulation coil and combined it with a surface-coil-type resonator (SCR). The inductor of the SCR was a circular single-turn one-loop coil (diameter, 1 mm), and the magnetic field modulation coil was a twin-loop coil consisting of two solenoid coils each made of 15 turns of copper wire on a cylindrical bobbin with an axial length of 3 mm and an elliptical cross section (major axis, 7 mm; minor axis, 3 mm). The former was located on the latter via a spacer (thickness, 3 mm) in such a way that the directions of their axes coincided. Their combined size was about 10 mm wide, 10 mm deep, and 6 mm high. The transmission lines of the SCR were set on resonance at about 700 MHz. EPR measurements of a phantom (comprising agar that included a nitroxide radical and physiological saline solution), made with a miniaturized modulation coil combined with the SCR, exhibited a sensitivity similar to that for the conventional method. Authors' address: Hidekatsu Yokoyama, Department of Pharmaceutical Sciences, International University of Health and Welfare, 2600-1 Kitakanemaru, Ohtawara 324-8501, Japan     

Unveiling the binding interaction of zinc (II) complexes of homologous Schiff-base ligands on the surface of BSA protein: A combined experimental and theoretical approach

Four new zinc (II) complexes [Zn (HL¹H)Br₂] (1), [Zn (HL¹H)Cl₂] (2), [Zn₂(HL²)Br₃] (3), and [Zn (HL²)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H₂L¹ = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H₂L² = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH₂- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔH^o, ΔS^o and ΔG^o) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 10⁴ M⁻¹ indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.     

A comparative study using conventional methods,ionic liquids,microwave irradiation and combinations thereof for the synthesis of 5-trifluoroacetyl-1,2,3,4-tetrahydropyridines

This study reports a comparison between conventional methods, ionic liquids, microwave (MW) irradiation, and combinations thereof for the synthesis of a series of fourteen 1-aryl-2-arylamino-5-trifluoroacetyl-1,2,3,4-tetrahydropyridines. In all of the reactions tested, the products were obtained at very good yields (87–97%), but the reaction times were very different, depending on the method used. Comparing to other methods, the time decreased to 1?min when [BMIM]BF₄ under MW irradiation was used, thus evidencing a synergic effect.     

Plants as resources for organic molecules: Facing the green and sustainable future today

Over the last century, the conventional and linear production system has significantly influenced the socio-environment globally. The transition to a more circular production system, aiming at maintaining the value of products and resources for as long as possible, is an opportunity to create innovative processes that are regenerative by intention. This means replacing the end-of-life concept with restoration, renewable energy use and by- or co-products as well as eliminating toxic chemicals by developing and using redesigned materials, procedures and business models. In this context, the main objective of this paper is to present a critical overview related to the most recent green and sustainable extraction or separation approaches to remove organic molecules from plant-derived resources, specifically agro-industrial and forestry waste using circular processing systems in operation in the last four years.     

Three‐Dimensional Branched and Faceted Gold–Ruthenium Nanoparticles: Using Nanostructure to Improve Stability in Oxygen Evolution Electrocatalysis

Achieving stability with highly active Ru nanoparticles for electrocatalysis is a major challenge for the oxygen evolution reaction. As improved stability of Ru catalysts has been shown for bulk surfaces with low‐index facets, there is an opportunity to incorporate these stable facets into Ru nanoparticles. Now, a new solution synthesis is presented in which hexagonal close‐packed structured Ru is grown on Au to form nanoparticles with 3D branches. Exposing low‐index facets on these 3D branches creates stable reaction kinetics to achieve high activity and the highest stability observed for Ru nanoparticle oxygen evolution reaction catalysts. These design principles provide a synthetic strategy to achieve stable and active electrocatalysts.     

A characterization study of xerogel silicapropylaniline powders

Silicapropylaniline nanometric materials with varying organic content were obtained using a sol-gel synthesis. By increasing the organic load, the scanning electron microscopy technique shows a slight increase in the average size of aggregated particles. N₂ isotherms and positron annihilation lifetime spectroscopy measurements show that the average pore size decreases accompanied by a surface area reduction. FTIR thermal analysis was used to estimate the thermal stability of the organic phase and also to detect the presence of trapped organic groups in closed pores. From the organic coverage and surface area measurements the surface density of the immobilized organic molecules as well as the average intermolecular distance between them could be estimated.     

The influences of supersaturation on LPE growth of GaN single crystals using the Na flux method

The dependency of LPE growth rate and dislocation density on supersaturation in the growth of GaN single crystals in the Na flux was investigated. When the growth rate was low during the growth of GaN at a small value of supersaturation, the dislocation density was much lower compared with that of a substrate grown by the Metal Organic Chemical Vapor Deposition method (MOCVD). In contrast, when the growth rate of GaN was high at a large value of supersaturation, the crystal was hopper including a large number of dislocations. The relationship between the growth conditions and the crystal color in GaN single crystals grown in Na flux was also investigated. When at 800 °C the nitrogen concentration in Na–Ga melt was low, the grown crystals were always tinted black. When the nitrogen concentration at 850 °C was high, transparent crystals could be grown.     

Asymptotic approximations for second-order linear difference equations in Banach algebras, II

A Liouville-Green (WKB) asymptotic approximation theory is developed for some classes of linear second-order difference equations in Banach algebras. The special case of linear matrix difference equations (or, equivalently, of second-order systems) is emphasized. Rigorous and explicitly computable bounds for the error terms are obtained, and this when both, the sequence index and some parameter that may enter the coefficients, go to infinity. A simple application is made to orthogonal matrix polynomials in the Nevai class.     

Adsorption and micellization behavior of novel gluconamide-type gemini surfactants

The adsorption and micellization behavior of novel sugar-based gemini surfactants (N,N(')-dialkyl-N,N(')-digluconamide ethylenediamine, Glu(n)-2-Glu(n), where n is the hydrocarbon chain length of 8, 10 and 12) has been studied on the basis of static/dynamic surface tension, fluorescence, dynamic light scattering (DLS) and cryogenic transmission electron microscope (cryo-TEM) data. The static surface tension of the aqueous Glu(n)-2-Glu(n) solutions measured at the critical micelle concentration (cmc) is observed to be significantly lower than that of the corresponding monomeric surfactants. This suggests that the gemini surfactants, newly synthesized in the current study, are able to form a closely packed monolayer film at the air/aqueous solution interface. The greater ability in the molecular association is supported by the remarkably (approximately 100-200 times) lower cmc of the gemini surfactants compared with the corresponding monomeric ones. With a combination of the fluorescence and DLS data, a structural transformation of the Glu(n)-2-Glu(n) micelles is suggested to occur with an increase in the concentration. The cryo-TEM measurements clearly confirm the formation of worm-like micelles of Glu(12)-2-Glu(12) at the concentration well above the cmc.