Synergistic effect between 4-(2-pyridylazo) resorcin and chloride ion on the corrosion of cold rolled steel in 0.5 M sulfuric acid

The corrosion inhibition of 1-(2-pyridylazo)-2-naphthol (PAR) on the corrosion of cold rolled steel in 0.5 M sulfuric acid (H₂SO₄) was studied using weight loss method and potentiodynamic polarization method. Results obtained revealed that together with chloride ion, PAR is an effective corrosion inhibitor for steel corrosion in sulfuric acid. It was found that for steel corrosion inhibition in the presence of single PAR in sulfuric acid the Temkin adsorption isotherm may be used to explain the adsorption phenomenon. For the mixture of PAR and NaCl used as corrosion inhibitor, however, the Langmuir adsorption isotherm can be used to satisfactorily elucidate the adsorption of mixture of PAR and NaCl. Potentiodynamic polarization studies showed that single PAR mainly acts as a cathodic inhibitor for the corrosion of steel in 0.5 M sulfuric acid. The mixture of PAR and chloride ion, however, acts as a mixed type inhibitor that mainly inhibits cathodic reaction of the steel corrosion in sulfuric acid. By means of electrochemical polarization tests, a desorption potential at ca. −370 mV was observed for the adsorption of mixture of PAR and chloride ion, when potential reaches this value, adsorbed inhibitor molecule heavily departs from the steel surface. For the mixture of PAR and chloride ion, thermodynamic parameters such as adsorption heat, adsorption entropy and adsorption free energy were obtained from experimental data of the temperature studies of the inhibition process at four temperatures ranging from 30 to 45 °C, the kinetic data such as apparent activation energies and pre-exponential factors at different concentrations of the inhibitor were calculated, and the effect of the apparent activation energies and pre-exponential factors on the corrosion rates of cold rolled steel was discussed. The most suitable range of inhibitor concentration was discussed. The inhibitive action was satisfactorily explained by using both thermodynamic and kinetic models. Synergism between chloride ion and PAR was proposed. The results obtained from weight loss and potentiodynamic polarization were in good agreement.     

聚甲基丙烯酸甲酯掺杂Ce3+的飞秒激光三维信息存储

用飞秒激光(200 fs,1 kHz,800 nm)脉冲在掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯(PMMA)膜中进行了光存储实验研究,包括对样品的吸收光谱、激光照射前后的电子旋转共振(Electron spin resonance,ESR)光谱的测量和讨论。结果表明掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯膜具有较低的写入阈值,有利于高速、并行的三维光存储。实验结果采用传统光学显微镜并行读出。给出了四层存储结果(点间距和层间距分别是4μm和16μm),并讨论了脉冲能量的大小对空腔尺寸的影响,进行高密度存储时,在保证读出信号灰度值足够大的情况下,应选择尽量小的激光脉冲写入能量。实验结果表明这种材料可以应用于三维光信息存储。     

Optosensing of hydrochloric acid based on the fluorescence quenching of a flavone copolymer

An optical fiber sensor for the continuous determination of hydrochloric acid is presented. It is based on the fluorescence quenching of a flavone containing copolymer membrane by hydrochloric acid. The quenching efficiency is greatly enhanced in the presence of Fe(III). This enhancement is attributed to the primary inner filter effect, as well as the formation of a complex between the 4′-N,N-dimethylaminoflavone group in the copolymer and the Fe(III) species extracted from hydrochloric acid solution. The optical response is linear and reversible for 0.10–6.00 mol L^–1 HCl with a response time of the order of a second. The standard deviations for repeated alternative measurements of 0.20 and 2.00 mol L^–1 hydrochloric acid are 0.32% and 0.46% (n = 10), respectively, indicating a good reproducibility. Because of the covalently bonding of the dye to polymer, the sensor exhibits also a good stability. Selectivity has also been evaluated for some potential interferents. The sensor in conjunction with a flow-injection system can be used for on-line determination of hydrochloric acid.     

添加助剂的钙钛矿型氧化物NdMO_3上的甲烷氧化偶联——Ⅱ.15% Li_2O/NdMO_3(M=Cr、Mn、Fe、Co、Ni)上的OCM反应研究

在添加了15%Li_2O的NdMO_3(M=Cr、Mn、Fe、Co、Ni)上进行了甲烷氧化偶联(OCM)反应研究.通过改变反应气中CH_4:O_2浓度比,在氧化态和“脱氧态”催化剂上的CH_4脉冲反应,探讨了表面吸附氧和晶格氧在OCM反应中的作用以及NdMO_3中不同金属离子(M)对OCM反应活性的影响等.     

The practice for eight-year operation of the cobalt-60 irradiation facility at Beijing Radiation Application Research Center

The radiation facility was made by Sulzer Company in Switzerland. The designed capacity is 3.7 × 10¹⁶Bq( 1MCi) and 12.21 × 10¹⁵Bq(330kCi)of Cobalt -60 source was loaded at the first phase. Current cobalt -60 source-loading is 2.4 × 10¹⁶Bq(650kCi). The equipment assembling and installation regulating and testing were completed at the end of 1988. The facility was put into commissioning in 1989. It operates 7000–8000 hours per year. The facility has been utilized to carry out many research work and irradiate many kinds of items. Lots of economical benefits have been gained since then. Now it is becoming a radiation processing model base in China. This paper summarized the strong and weak points of the design of the facility through in eight years' practice and analysed the economical benefits.     

微型硅谐振式力传感器的振动分析

介绍了谐振式力传感器的工作原理，并从理论上和实验上对中科院合肥智能所研制的第一代微型硅谐振梁（３×０．４×０．０４５ｍｍ＾３）式测力传感器进行了全面的振动分析，所得结构为其进一步优化设计提供了科学根据，文中使用的实验分析方法，为其它微小物体的动态和识别提供了一条有效途径。     

热丝CVD生长金刚石薄膜喇曼散射研究

本文报道热丝化学气相沉积法（ＨＦＣＶＤ）生长金钢石薄膜的喇曼散射结果。选取多种峰型，对金钢石薄膜喇曼谱（１１０－１８００ｃｍ－１）采用最小二乘法进行非线性拟合，得到最佳拟合模型，其计算得到的拟合曲线怀实验谱图符合得较好。该模型揭示，石墨Ｄ峰（１３５５ｃｍ－１）是金刚石薄膜喇曼谱中不可缺少的一个组份，并且结合石墨Ｄ峰和金刚石喇曼的空间相关线型，可以解释金刚石喇曼区特殊峰形的物理机制，拟合参量的进一步     

激发态分子内质子转移分子2－（2′－羟基苯基）间氮杂氧茚“染料”激光特性的实验和理论研究

报道了以Ｎ２激光为泵浦光源，获得激发态分子内质子转移（ＥＳＩＰＴ）分子ＨＢＯ的激光输出现象。其激光转换效率约为１７％，调谐范围为４９５～５４０ｎｍ，最强的输出波长在５１０ｎｍ。以ＨＢＯ的激发态分子内质子转移的光物理和光化学过程为基础，建立了ＨＢＯ产生激光的动态模型，数值模拟了在宽带和窄带情况下激光输出的光谱特性和时间特性，理论计算值与实验观测值很好相符，同时证实了激发态分子内质子转移分子的激光脉冲宽度依赖于激发态分子内质子转移分子的酮式异构体的基态Ｓ′０的寿命