π键及大π键对正电集团和负电集团的作用——分子间引力的选择性

The selectivity of intermolecular force is caused by the special interaction between two adaptable groups on the molecules. π bond and conjugated π bonds such as benzene ring are negative charged groups,which may attract stongly positively charged H groups such as 3H in β-C_6H_6Cl_6, and repulse other ne- gatively charged groups such as-C=O(Q). Our experiments show that the reduced retention time tr of benzene on non- polar β-C_6H_6Cl_6 is much greater than that on polar fixed phases such as CH_3— —NO_2 in gas chromatography and that the het of solvation of β-C_6H_6Cl_6 in benzene is also much greater than that of the polar α-C_6H_6Cl_6 and γ-C_6H_6Cl_6. This can′t be explained by the usual Van de Waals′ force. It results from the selective intermoleccular force....     

Interaction between Ti-gel and silver, copper, as well as nickel compounds under ultrasound irradiation

Ag-TiO₂, Cu-TiO₂ and Ni-TiO₂ were prepared by sonication. The interactions of Ti-gel with silver, copper and nickel ions under ultrasound irradiation are very different, although these ions can be dispersed very well in titania. The results of EDXA and XRD analysis indicate that Ti-gel does not react with AgCl and crystallizes unaffectedly to form rutile. M(OH)₂ (M = Cu and Ni), on the other hand, favors polycondensation with Ti-gel and affects the crystallization of Ti-gel. CuO favors stabilization of the anatase phase. Ni²⁺ ions tend to incorporate more easily into titania than Cu²⁺ ions do when the samples are calcined. TEM, and BET were also used to characterize the samples.     

磷酸铕钠及其与磷酸钡钠的固溶体的合成、结构与性质的研究

用钠蒸气还原ＥｕＰＯ４合成了新化合物ＮａＥｕＰＯ４其结构属三方晶系．空间群Ｐ３ｍｌ，ａ＝５４９．９（２），ｃ＝６９６．１（２）ｐｍ，Ｚ＝２，Ｄｘ＝４．９１７ｇ·ｃｍ（－３），Ｇｌａｓｅｒｉｔｅ（ＫＮａＳＯ４）晶型．在晶体中铕（Ⅱ）和钠离子有序地分布在四个Ｃ（３Ｖ）格位上，具双中心荧光发射３８９．２，４６５．６ｎｍ．它与ＮａＢａＰＯ４可形成无限固溶体并且有很强的荧光．还报道了红外图谱．     

Study on fluorescence property of dopamine and determination of dopamine by fluorimetry

In this study, a rapid and sensitive high performance liquid chromatography-inductively coupled plasma-mass spectrometry (HPLC-ICP-MS) determination of primary As species in fish tissues and urine is reported. The separation was achieved on an Altima C18 column with a mobile phase containing citric acid and hexanesulfonic acid (pH 4.5). As(V), monomethylarsonic acid (MMA), As(III), dimethylarsinic acid (DMA) and arsenobetaine (AsB) were separated in less than 4 min with retention times of 83, 99, 130, 166 and 208 s, respectively. This separation of five species in less than 4 min should be attractive to those interested in As speciation. The quantification limits were 44, 56, 94, 64, 66 ng l(-1) and the relative standard deviations (R.S.D.) for day-to-day injections of As at 2 mug l(-1) were 2.0, 3.1, 2.4, 3.8 and 4.0%. The procedure was tested using two reference materials (DORM-2 dogfish muscle tissue, NIST SRM 2670 Freeze-dried Urine, normal level) and then applied to real-world samples. The results obtained demonstrate the suitability of the procedure for screening and quantification at physiological levels of primary As species in biological samples.     

Synthesis,crystal structures and electrochemical properties of group 6 metal carbonyl anion complexes

A series of [M(CO)₅I]⁻ and [M₂(CO)₁₀I]⁻ anion complexes have been synthesized by the photochemical reaction of PhCH₂N(CH₃)₃I or FcCH₂N(CH₃)₃I (Fc=ferrocenyl) with M(CO)₆ (M = Cr, Mo or W), and characterized by elemental analyses, i.r., ¹H-n.m.r. and ¹³C-n.m.r. spectra in the case of the molybdenum and tungsten complexes. These complexes exhibit considerably different electrochemical behavior, when investigated by cyclic voltammetry. The crystal structures of [PhCH₂N(CH₃)₃][Cr(CO)₅I] and [FcCH₂N(CH₃)₃][W₂(CO)₁₀I] have been determined by X-ray diffraction, indicating that only weak contacts maybe exist between anions and cations by the I...H bond in the former, and there are no direct interactions between anions and cations in the latter.     

Synthesis,crystal structure and property of a novel azide-bridged one-dimensional chain copper(II) complex with a dinucleating macrocyclic polyamine

An azide-bridged polymeric cationic chain complex, [LCu₂(N₃)₂]n(ClO₄)_2n ·n(H₂O)**, where L=the dinucleating macrocyclic ligand bis-p-xylylBISDIEN, has been prepared and characterized by x-ray crystallography, u.v.-vis and i.r. spectra, and by magnetic measurements. The structure consists of cationic azide-bridged [LCu₂(N₃)₂]²⁺ (unit) chains, non-coordinated perchlorate anions and crystallized water molecules. The azide anion is bound to two copper atoms in neighboring units with an end-to-end bridging mode. In each unit, the copper atoms have a different coordination geometry; Cu(1) is a four-coordinated, distorted square-planar geometry, whereas Cu(2) is a five-coordinated, distorted square-pyramid. The electronic spectra of the title complex differ in anhydrous and in aqueous MeCN solutions, indicating that dissociation and solvation occur in aqueous solutions. The characteristic i.r. absorptions of azides and perchlorates are described. Magnetic moments vary from 2.05 (B.M.) at 300K to2.01 (B.M.) at 80K, which suggests that very weak interactions exist between the metals.     

A Two-dimensional Lanthanide Coordination Framework with a New Amide-type Tripodal Ligand, 2,2′,2＂-Nitrilotris{[（2′- benzylaminoformyl）phenoxy]ethyl}amine

The La(III) complex with a new amide‐type tripodal ligand,2,2′.2″‐nitrilotris{[(2′‐benzylaminofomyl)‐phenoxylethyl)amine (L), was synthesized and characterized by X‐ray crystallographic analysis. Crystal data: C₄₈H_55.50LaN₇O_18.75, M_r=1169.40, monoclinic. space group, P2₁/n, a= 1.0644(3) nm. b=2.3889(5) nm, c= 2.1917(5) nm, β=90.65°, V=5.573(2) nm³, Z=1, D_c=1.394 g°cm^?3, R₁=0.0487, wR [1>2s?(I)]=0.1266. The results reveal that each La(III) ion binds to 9 oxygen atoms, three of which belong to carbonyl groups from three tripodal ligands and six to three bidentate nitrate groups and a two‐dimensional sheet of 4.8² networks is assembled by metal‐ligand coordination interaction. L, a heptadentate compound, merely acts as a tridentate bridging spacer due to its steric hindrance and links the La(III) ions as three‐connected nodes.     

Coupling immunoassays with chromatographic separation techniques

Coupling immunoassays with HPLC separation techniques is becoming increasingly useful in the analysis of biological and nonbiological samples of both large and small molecules. This is because it provides both sensitivity and selectivity for molecular analysis at relatively low cost, low maintenance and with excellent potential for automation. This paper reviews application of this hyphenated approach both in the pre-column immunoextraction and post-column immunodetection modes. Systems in which immunoassays are interfaced to chromatographic separations in order to separate bound and free fractions of the immunoassay will not be included since these systems do not provide the enhanced selectivity common to hyphenated systems. Post-column immunodetection is based on various immunoassay formats such as direct detection, one-site, competitive and sandwich immunoassays. Homogeneous immunodetectors are more convenient than heterogeneous immunodectors since there are no separation and column regeneration steps involved in homogeneous immunoassays. On the other hand, heterogeneous immunoassays are generally more sensitive than homogeneous immunoassays since interfering substances are removed prior to immunodetection. Advantages and limitations for the various approaches will be discussed.     

Fabrication of hexaphenylsilole nanowires and their morphology-tunable photoluminescence.

Immersion of nanoporous alumina membranes into saturated solutions of hexaphenylsilole with subsequent solvent evaporation affords aligned organic nanowires. The luminescent properties of the hexaphenylsilole nanowires can be manipulated by varying their morphologies, which were controlled by changing the channel sizes of the alumina templates.     

La2O3-Mo5Si3/MoSi2复合材料的高温氧化行为

研究了0．8％La2O3-MosSi3／MoSi2复合材料在1200℃空气中的高温氧化行为。结果表明：0．8％稀土和MoSi3的加入，使材料的抗氧化性能降低。MosSi3含量越高，材料的抗氧化性能越差。当MosSi3含量低于30％时，在氧化初始阶段，质量变化呈直线下降，随着氧化的进行，氧化逐渐增重，材料表面形成较致密的SiO2阻止了材料的进一步氧化，使得氧化增重较小。而0．8％La2O3-40％Mo5Si3／MoSi2复合材料却出现了“粉化”现象。0．8％La2O3．MosSi3／MoSi2复合材料抗氧化性能的降低，归因于Mo5Si3差的抗氧化性和材料致密度的降低；另外，稀土和Mo5Si3的加入，细化了材料的晶粒，使晶界面积增加，加速了氧在晶界中的扩散，促进了材料的氧化。