Studies on solution cast perfluorocarbonsulfonic acid ionomers

The thermal properties of perfluorocarbonsulfonic acid ionomer films cast from solution and their temperature-dependent far infrared spectra have been investigated. In addition to the endotherms and spectral changes associated with the loss of solvent as the films were heated, a significant exotherm has been observed and assigned to the relaxation associated with rearrangements resulting in partially crystallized phases in insoluble thermally treated membranes. © 1993 John Wiley & Sons, Inc.     

Measurement of the spin and temperature dependence of ddµ molecule formation rate in solid and liquid deuterium

The ddµ molecule formation rate is experimentally measured for the two hyperfine states of the dµ-atom in the temperature range of 5–30 K. Results are consistent with a preliminary measurement by the TRIUMF group and contradict theoretical predictions. The work has been performed on the JINR phasotron (Dubna).     

Investigation by EPR and ENDOR spectroscopy of the novel 4Fe ferredoxin fromPyrococcus furiosus

The hyperthermophilic archaeonPyrococcus furiosus contains a four-Fe ferredoxin (Pf- Fd) that differs from most other 4Fe-Fd’s in that its [Fe₄S₄] cluster is anchored to protein by only three cysteinyl residues.Pf- Fd also is of interest because in its reduced form, [Fe₄S₄]⁺, the cluster exhibits bothS = 1/2 andS = 3/2 spin states. Addition of excess cyanide ion converts the cluster exclusively to anS = 1/2 state (g₁ = 2.09, g₂ = 1.95, g₃ = 1.92), however dialysis restores the EPR signal of native reduced protein indicating that the cluster is not irreversibly altered by cyanide. Both the native protein and protein in the presence of excess cyanide ion (Pf- Fd 4Fe-CN) were investigated here using the techniques of electron paramagnetic resonance (EPR) and electron-nuclear double resonance (ENDOR) spectroscopy. In particular,Pf- Fd 4Fe-CN was investigated using¹³CN^? and C¹⁵N^? ligands.¹³C and¹⁵N ENDOR indicated that a single cyanide ion bound directly, with the cluster showing an unusually small contact interaction (a_iso(¹³C)～ ?3 MHz, a_iso(¹⁵N) ～ 0). This is in contrast to cyanide bound to monomeric low-spin Fe(III)-containing proteins such as transferrin and myoglobin, for which the¹³C hyperfine coupling has a large isotropic component (a_iso(¹³C) ≈ ?30 MHz). This small contact interaction is not due to low spin density of Fe, as⁵⁷Fe ENDOR of the singly and triply labeledPf- Fd 4FeCN isotopologs, [⁵⁷FeFe₃S₄]⁺ and [Fe⁵⁷Fe₃S₄]⁺, show hyperfine coupling characteristic for [Fe₄S₄]⁺ clusters, particularly for the Fe to which cyanide binds. Thus, the low spin density on¹³C is not due to low spin density on the Fe ion to which it binds. Further theoretical work is needed to explain the contrast between the strong electronic effect of cyanide ion binding with the low spin density on the ligand.     

Radiative characteristics of pulsed power driven Z-pinch aluminumplasmas

In this paper, we study the dynamics of a massive aluminum Z-pinch plasma load and evaluate its performance as a soft X-ray radiator. A radiation hydrodynamic model self-consistently driven by a circuit describes the dynamics. Comparisons are made for the K- and L-shell soft X-ray emission as a function of the ionization dynamic model. The ionization dynamic models are represented by: 1) a time-dependent nonequilibrium (NEQ) model, 2) a collisional radiative equilibrium (CRE) model, and 3) a local thermodynamic equilibrium (LTE) model. For all three scenarios the radiation is treated 1) in the free streaming optically thin approximation where the plasma is treated as a volume emitter and 2) in the optically thick regime where the opacity for the lines and continuum is self-consistently calculated online and the radiation is transported through the plasma. Each simulation is carried out independently to determine the sensitivity of the implosion dynamics to the ionization and radiation model, i.e., how the ionization dynamic model affects the radiative yield and emission spectra. Results are presented for the L- and K-shell radiation yields and emission spectra as a function of photon energy from 10 eV to 10 keV. Also, departure coefficients from LTE are presented for selected levels and ionization stages     

Optosensing of hydrochloric acid based on the fluorescence quenching of a flavone copolymer

An optical fiber sensor for the continuous determination of hydrochloric acid is presented. It is based on the fluorescence quenching of a flavone containing copolymer membrane by hydrochloric acid. The quenching efficiency is greatly enhanced in the presence of Fe(III). This enhancement is attributed to the primary inner filter effect, as well as the formation of a complex between the 4′-N,N-dimethylaminoflavone group in the copolymer and the Fe(III) species extracted from hydrochloric acid solution. The optical response is linear and reversible for 0.10–6.00 mol L^–1 HCl with a response time of the order of a second. The standard deviations for repeated alternative measurements of 0.20 and 2.00 mol L^–1 hydrochloric acid are 0.32% and 0.46% (n = 10), respectively, indicating a good reproducibility. Because of the covalently bonding of the dye to polymer, the sensor exhibits also a good stability. Selectivity has also been evaluated for some potential interferents. The sensor in conjunction with a flow-injection system can be used for on-line determination of hydrochloric acid.     

添加助剂的钙钛矿型氧化物NdMO_3上的甲烷氧化偶联——Ⅱ.15% Li_2O/NdMO_3(M=Cr、Mn、Fe、Co、Ni)上的OCM反应研究

在添加了15%Li_2O的NdMO_3(M=Cr、Mn、Fe、Co、Ni)上进行了甲烷氧化偶联(OCM)反应研究.通过改变反应气中CH_4:O_2浓度比,在氧化态和“脱氧态”催化剂上的CH_4脉冲反应,探讨了表面吸附氧和晶格氧在OCM反应中的作用以及NdMO_3中不同金属离子(M)对OCM反应活性的影响等.     

The practice for eight-year operation of the cobalt-60 irradiation facility at Beijing Radiation Application Research Center

The radiation facility was made by Sulzer Company in Switzerland. The designed capacity is 3.7 × 10¹⁶Bq( 1MCi) and 12.21 × 10¹⁵Bq(330kCi)of Cobalt -60 source was loaded at the first phase. Current cobalt -60 source-loading is 2.4 × 10¹⁶Bq(650kCi). The equipment assembling and installation regulating and testing were completed at the end of 1988. The facility was put into commissioning in 1989. It operates 7000–8000 hours per year. The facility has been utilized to carry out many research work and irradiate many kinds of items. Lots of economical benefits have been gained since then. Now it is becoming a radiation processing model base in China. This paper summarized the strong and weak points of the design of the facility through in eight years' practice and analysed the economical benefits.     

On the origin of 1.5 μm luminescence in porous silicon coated with sol–gel derived erbium-doped Fe2O3 films

Sol–gel derived Fe₂O₃ films containing about 10 wt% of Er₂O₃ were deposited on porous silicon by dipping or by a spin-on technique followed by thermal processing at 1073 K for 15 min. The samples were characterized by means of PL, SEM and X-ray diffraction analyses. They exhibit strong room-temperature luminescence at 1.5 μm related to erbium in the sol–gel derived host. The luminescence intensity increases by a factor of 1000 when the samples are cooled from 300 to 4.2 K. After complete removal of the erbium-doped film by etching and partial etching the porous silicon, the erbium-related luminescence disappears. Following this, luminescence at 1.5 μm originating from optically active dislocations (“D-lines”) in porous silicon was detected. The influence of the conditions of synthesis on luminescence at 1.5 μm is discussed.