Cavitand‐Grafted Silicon Microcantilevers as a Universal Probe for Illicit and Designer Drugs in Water

The direct, clean, and unbiased transduction of molecular recognition into a readable and reproducible response is the biggest challenge associated to the use of synthetic receptors in sensing. All possible solutions demand the mastering of molecular recognition at the solid–liquid interface as prerequisite. The socially relevant issue of screening amine‐based illicit and designer drugs is addressed by nanomechanical recognition at the silicon–water interface. The methylamino moieties of different drugs are all first recognized by a single cavitand receptor through a synergistic set of weak interactions. The peculiar recognition ability of the cavitand is then transferred with high fidelity and robustness on silicon microcantilevers and harnessed to realize a nanomechanical device for label‐free detection of these drugs in water.     

Trastuzumab quantification in serum: a new,rapid, robust ELISA assay based on a mimetic peptide that specifically recognizes trastuzumab

Trastuzumab, a humanized monoclonal antibody directed against the epidermal growth factor receptor 2 (HER2), is a milestone in the treatment of HER2-overexpressing breast cancer patients. An enzyme-linked immunosorbent assay (ELISA) for trastuzumab has been developed for routine use in the laboratory to support clinical and pharmacokinetic studies to optimize therapy. The method relies on an antigen peptide linked to a 96-well plate via the streptavidin/biotin system. The peptide sequence mimics the extracellular portion of the HER2 receptor that is recognized by trastuzumab. The calibration range of the assay is 10 to 360 ng/mL per well, corresponding to a trastuzumab serum concentration from 5 to 180 μg/mL with a lower limit of quantification of 10 μg/mL. Validation results demonstrate that trastuzumab can be accurately and precisely quantified in human serum using this assay. The procedure was also tested in sera obtained from breast cancer patients to evaluate trastuzumab serum levels, confirming the applicability of method that could be a valid assay to use in daily laboratory practice.     

Self‐Alignment of Low‐Valent Octanuclear Palladium Atoms

A linear tetraphosphine, meso‐bis[(diphenylphosphinomethyl)phenylphosphino]methane (dpmppm) was used to synthesize linear octapalladium‐extended metal atom chains as discrete molecules of [Pd₈(μ‐dpmppm)₄](BF₄)₄ ( 1 ) and [Pd₈(μ‐dpmppm)₄L₂](BF₄)₄ (L=2,6‐xylyl isocyanide (XylNC; 2 ), acetonitrile ( 3 ), and N,N‐dimethylformamide (dmf; 4 )), which are stable in the solution states and show interesting temperature‐dependent photochemical properties in the near IR region. Variable temperature NMR studies demonstrated that at higher temperature T≈140 °C the Pd₈ chains were dissociated into Pd₄ fragments, which were thermodynamically self‐aligned to restore the Pd₈ chains at lower temperature T<60 °C. The coldspray ionization mass spectra suggested a possibility for further aggregation of the linear tetrapalladium units.     

Two-step elution of human serum proteins from different glass-modified bioactive surfaces: a comparative proteomic analysis of adsorption patterns

Plasma protein adsorption patterns on surfaces may give vital information to evaluate biocompatibility of biomaterials designed for direct blood-contacting applications or tissue integration. Adsorption of human serum proteins on four different types of biomaterials (glass, aminosilanized glass, hyaluronan and sulfated hyaluronan) was analyzed by two-dimensional electrophoresis. Desorption of proteins from the surfaces was first classically achieved by sodium dodecyl sulfate (SDS) elution. We introduced a second elution step (by use of isoelectric focusing (IEF) sample buffer consisting of urea, 3-[(3-cholamidopropyl)dimethylammonio]-1-propansulfonate, and dithioerythritol) which allows more stringent elution conditions and is a tool to evaluate the protein adsorption strength to biomaterials. Moreover, the two-step elution may discriminate between irreversible and reversible adsorption of plasma proteins for biomaterials, thus helping to elucidate the structure of protein multilayers which form a complex system at the surfaces. The IEF sample buffer proved not to alter the biomaterial structure and integrity. Hydrophobic bonds resulted to be the main strength driving protein adsorption onto our biomaterials. Apolipoproteins were the most important proteins interacting with the surfaces suggesting that high-density lipoprotein (HDL) particles could play a role in biocompatibility due to their beneficial effects on endothelial cells.     

Determination of vegetal proteins in milk powder by sodium dodecyl sulfate-capillary gel electrophoresis: interlaboratory study

An interlaboratory study, with the participation of 8 laboratories, was conducted to evaluate a sodium dodecyl sulfate-capillary gel electrophoresis method for determination of adulteration of milk powder with soy and pea proteins. Calibration standards (0-8%, w/w, soy and pea protein in total protein) and adulterated skim milk powders (0-5%, w/w, soy and pea proteins in total protein) were produced. Vegetal proteins were determined after removal of milk proteins by pretreatment of the samples with tetraborate-EDTA buffer, pH 8.3. Repeatability standard deviations ranged from 9 to 15% and reproducibility standard deviations ranged from 25 to 30% in the samples containing 5% vegetal protein in total protein.     

Microwave assisted organic synthesis (MAOS) of small molecules as potential HIV-1 integrase inhibitors

Integrase (IN) represents a clinically validated target for the development of antivirals against human immunodeficiency virus (HIV). In recent years our research group has been engaged in the stucture-function study of this enzyme and in the development of some three-dimensional pharmacophore models which have led to the identification of a large series of potent HIV-1 integrase strand-transfer inhibitors (INSTIs) bearing an indole core. To gain a better understanding of the structure-activity relationships (SARs), herein we report the design and microwave-assisted synthesis of a novel series of 1-H-benzylindole derivatives.     

Synthesis of (+)-dumetorine and congeners by using flow chemistry technologies

An efficient total synthesis of the natural alkaloid (+)-dumetorine by using flow technology is described. The process entailed five separate steps starting from the enantiopure (S)-2-(piperidin-2-yl)ethanol 4 with 29% overall yield. Most of the reactions were carried out by exploiting solvent superheating and by using packed columns of immobilized reagents or scavengers to minimize handling. New protocols for performing classical reactions under continuous flow are disclosed: the ring-closing metathesis reaction with a novel polyethylene glycol-supported Hoveyda catalyst and the unprecedented flow deprotection/Eschweiler-Clarke methylation sequence. The new protocols developed for the synthesis of (+)-dumetorine were applied to the synthesis of its simplified natural congeners (-)-sedamine and (+)-sedridine.     

Facially Dispersed Polyhydride Cu9 and Cu16 Clusters Comprising Apex-Truncated Supertetrahedral and Square-Face-Capped Cuboctahedral Copper Frameworks

By using a linear tetraphosphine, meso-bis[(diphenylphosphinomethyl)phenylphosphino]methane (dpmppm), nona- and hexadecanuclear copper hydride clusters, [Cu₉H₇(μ-dpmppm)₃]X₂ (X=Cl ( 1 a ), Br ( 1 b ), I ( 1 c ), PF₆ ( 1 d )) and [Cu₁₆H₁₄(μ-dpmppm)₄]X₂ (X₂=I₂ ( 2 c ), (4/3) PF₆⋅(2/3) OH ( 2 d )) were synthesized and characterized. They form copper-hydride cages of apex-truncated supertetrahedral {Cu₉H₇}²⁺ and square-face-capped cuboctahedral {Cu₁₆H₁₄}²⁺ structures. The hydride positions were estimated by DFT calculations to be facially dispersed around the copper frameworks. A kinetically controlled synthesis gave an unsymmetrical Cu₈H₆ cluster, [Cu₈H₆(μ-dpmppm)₃]²⁺ ( 3 ), which readily reacted with CO₂ to afford linear Cu₄ complexes with formate bridges, leading to an unprecedented hydrogenation of CO₂ into formate catalyzed by {Cu₄(μ-dpmppm)₂} platform. The results demonstrate that new motifs of copper hydride clusters could be established by the tetraphosphine ligands, and the structures influence their reactivity.     

A screening method for the detection of synthetic glucocorticosteroids in human urine by liquid chromatography–mass spectrometry based on class-characteristic fragmentation pathways

This paper describes a liquid chromatographic/tandem mass spectrometric (LC/MS–MS) method specifically designed for the screening of synthetic glucocorticosteroids in human urine. The method is designed to recognize a common mass spectral fragment formed from the particular portion of the molecular structure that is common to all synthetic glucocorticosteroids and that is fundamental to their pharmacological activity. As such, the method is also suitable for detecting unknown substances, provided they contain the portion of the molecular structure selected as the analytical target. The effectiveness of this approach was evaluated on seventeen synthetic glucocorticosteroids. Urine samples, including blank urines spiked with one or more synthetic glucocorticosteroids, were treated according to a standard procedure (enzymatic hydrolysis, liquid/liquid extraction and evaporation to dryness) and analyzed using LC/MS-MS with electrospray ionization (ESI). MS–MS acquisition was carried out in a precursor ion scan, and the results were compared with those obtained by a previously developed reference technique based on acquisition in the multiple reaction monitoring (MRM) mode. All of the glucocorticosteroids considered in this study are clearly detectable in urine, with a limit of detection in the concentration range 5–20 ng/mL, depending on the glucocorticosteroid structure. The proposed method is therefore suitable for the detection of glucocorticosteroids in urine samples taken for “in competition” sport anti-doping control tests, matching the requirements of the World Anti-Doping Agency (WADA) for accredited anti-doping laboratories. Figure Structures of the synthetic glucocorticoids considered in this study