Precise measurement of positronium hyperfine splitting using the Zeeman effect

Positronium is an ideal system for the research of the quantum electrodynamics (QED) in bound state. The hyperfine splitting (HFS) of positronium, Δ_HFS, gives a good test of the bound state calculations and probes new physics beyond the Standard Model. A new method of QED calculations has revealed the discrepancy by 15 ppm (3.9σ) of Δ_HFS between the QED prediction and the experimental average. There would be possibility of new physics or common systematic uncertainties in the previous all experiments. We describe a new experiment to reduce possible systematic uncertainties and will provide an independent check of the discrepancy. We are now taking data and the current result of Δ_HFS?=?203.395 1 ±0.002 4 (stat., 12 ppm) ±0.001 9 (sys., 9.5 ppm) GHz has been obtained so far. A measurement with a precision of O(ppm) is expected within a year.     

Universal function for the brilliance of undulator radiation considering the energy spread effect

Angular and spatial profiles of undulator radiation have been investigated to derive a universal function that evaluates the brilliance of undulator radiation and takes into account the effects of electron beam emittance and energy spread. It has been found that the effects of energy spread on the angular divergence and source size can be expressed by simple analytic expressions, and a universal brilliance function has been derived by convolution with the electron beam distribution functions. Comparisons with numerical results have been carried out to show the validity and applicability of the universal function.     

Influence of Cu electroplating solutions on boron carbon nitride (BCN) film

Cu electroplating is required for the fabrication of Cu/low-k interconnections. The permeation of a plating solution into low-k films during Cu electroplating is a serious challenge for 45-nm nodes and more complex devices. We investigated the influence of Cu electroplating solutions on boron carbon nitride (BCN) as a low-k film. After dipping it into a Cu electroplating solution that contained additives, the BCN film's hydrophilic surface changed to a hydrophobic surface, and the incorporation of water into the BCN film was suppressed by surfactant adsorption. Sulfuric residue was detected on the BCN sample by thermal desorption spectroscopy after treatment in the Cu electroplating solution with additives; however, it was found through electrical measurements that this solution did not affect the leakage current or the dielectric constant of the BCN film. We successfully fabricated an electroplating Cu layer on a BCN film with good adhesion, and we believe that this BCN film is a sufficiently useful material for Cu/BCN integration in LSI.     

SQUID sensor application for small metallic particle detection

High-Tc superconducting quantum interference device (SQUID) is an ultra-sensitive magnetic sensor. Since the performance of the SQUID is improved and stabilized, now it is ready for application. One strong candidate for application is a detection system of magnetic foreign matters in industrial products or beverages. There is a possibility that ultra-small metallic foreign matter has been accidentally mixed with industrial products such as lithium ion batteries. If this happens, the manufacturer of the product suffers a great loss recalling products. The outer dimension of metallic particles less than 100 μm cannot be detected by an X-ray imaging, which is commonly used for the inspection. Ionization of the material is also a big issue for beverages in the case of the X-ray imaging. Therefore a highly sensitive and safety detection system for small foreign matters is required. We developed detection systems based on high-Tc SQUID with a high-performance magnetic shield. We could successfully measure small iron particles of 100 μm on a belt conveyer and stainless steel balls of 300 μm in water. These detection levels were hard to be achieved by a conventional X-ray detection or other methods.     

Aerosol generation and measurement of multi-wall carbon nanotubes

Mass production of some kinds of carbon nanotubes (CNT) is now imminent, but little is known about the risk associated with their exposure. It is important to assess the propensity of the CNT to release particles into air for its risk assessment. In this study, we conducted aerosolization of a multi-walled CNT (MWCNT) to assess several aerosol measuring instruments. A Palas RBG-1000 aerosol generator applied mechanical stress to the MWCNT by a rotating brush at feed rates ranging from 2 to 20 mm/h, which the MWCNT was fed to a two-component fluidized bed. The fluidized bed aerosol generator was used to disperse the MWCNT aerosol once more. We monitored the generated MWCNT aerosol concentrations based on number, area, and mass using a condensation particle counter and nanoparticle surface area monitor. Also we quantified carbon mass in MWCNT aerosol samples by a carbon monitor. The shape of aerosolized MWCNT fibers was observed by a scanning electron microscope (SEM). The MWCNT was well dispersed by our system. We found isolated MWCNT fibers in the aerosols by SEM and the count median lengths of MWCNT fibers were 4–6 μm. The MWCNT was quantified by the carbon monitor with a modified condition based on the NIOSH analytical manual. The MWCNT aerosol concentration (EC mass base) was 4 mg/m³ at 2 mm/h in this study.     

Magnetic field effect on the pairing state competition in quasi-one-dimensional organic superconductors (TMTSF)2X

We study the effect of the magnetic field on the pairing state competition in organic conductors (TMTSF)₂X by applying random phase approximation to a quasi-one-dimensional extended Hubbard model. We show that the singlet pairing, triplet pairing and the Fulde–Ferrell–Larkin–Ovchinnikov (FFLO) superconducting states may compete when charge fluctuations coexist with spin fluctuations. This rises a possibility of a consecutive transition from singlet pairing to FFLO state and further to S_z = 1 triplet pairing upon increasing the magnetic field. We also show that the singlet and S_z = 0 triplet components of the gap function in the FFLO state have “d-wave” and “f-wave” forms, respectively, which are strongly mixed.     

Numerical simulation of inductive method for determining spatial distribution of critical current density

The inductive method for measuring the critical current density j_C in a high-temperature superconducting (HTS) thin film has been investigated numerically. In order to simulate the method, a non-axisymmetric numerical code has been developed for analyzing the time evolution of the shielding current density. In the code, the governing equation of the shielding current density is spatially discretized with the finite element method and the resulting first-order ordinary differential system is solved by using the 5th-order Runge–Kutta method with an adaptive step-size control algorithm. By using the code, the threshold current I_T is evaluated for various positions of a coil. The results of computations show that, near a film edge, the accuracy of the estimating formula for j_C is remarkably degraded. Moreover, even the proportional relationship between j_C and I_T will be lost there. Hence, the critical current density near a film edge cannot be estimated by using the inductive method.     

Time-reversal symmetry-breaking in two-band superconductors

Competition between an interband Josephson interaction and a biquadratic interband interaction can break time-reversal symmetry when the interband interactions are very weak compared with the intraband interaction. We demonstrate this using the phenomenological Ginzburg–Landau free energy, taking into account terms essential for this phenomenon. This time-reversal symmetry-breaking state peels away a sheet of an interband phase difference soliton wall. This sheet is the domain wall between two different chiral states. The peeling reduces the formation energy of the domain wall. The domain wall can simultaneously erase the Meissner effect and the specific heat jump when the entropy invokes many domain walls, and its life time is prolonged by a pinning owing to an inhomogeneity such as surface roughness.     

Effect of high pressure treatment on sarcoplasmic reticulum

Abstract

This paper describes the changes in biochemical activities of sarcoplasmic reticulum(SR) and Ca²⁺ release from SR in the rabbit skeletal muscle subjected to a high pressure treatment(100∽300 MPa) to investigate the mechanism for pressure-induced meat tenderization and acceleration of meat conditioning. Pressure-dependent changes were observed in the both extra and basal ATPase activities of SR prepared from the muscles exposed to high pressure. Ca²⁺ uptaking ability of SR vesicles measured by fluorescent chelating reagent, indo-1, decreased with increasing pressure applied to the muscle. Ultrastructural studies revealed that Ca²⁺ which was mainly localized in the SR region of the untreated fiber bundles was translocated into myofibrils in the pressurized muscle. Obtained results in this report may be one of the causes for meat tenderization and acceleration of meat conditioning induced by high pressure treatment.