Instantaneous strain recovery elasticity and endothermic heat change in nylon-6 monofilaments and silicone rubbers

The instantaneous elastic moduli for a nylon-6 monofilament were derived on strain recoveries right after creep, stress relaxation, and rapid elongation,E _c ,E _s andE _e , respectively. It was found that during strain recoveryE _s (>E _e ) andE _e increase monotonically with increasing load,m ₁, on the sample. The extrapolated value of E_s atm ₁=0 g is almost equal to Young's modulus, 4.06 GPa. The value ofE _c also increased with increasingm ₁, and atm ₁=600 g (1.93 t cm^–2) reached about 14 GPa. The endothermic heat change right after creep, stress relaxation or rapid elongation,Q, was negligibly small. For comparison,E _s ,E _c andQ were also investigated for silicone rubber. It was found thatE _s (53.8 M Pa at the draw ratioD=1.2) decreased abruptly atD=1.3. In the range ofD=1.4–1.9,E _s was only 22.6 MPa. In the case of stress relaxation,Q increased with increasingD from 4 J mol^–1 (atD=1.2) to 56 J mol^–1 (atD=1.9). FurthermoreE _c (5.58 MPa atm ₁=133.8 g (429.4 kg cm^–2)) increased gradually with increasing m₁ and attained 16.6 MPa atm ₁=548.4 g (1.76 t cm^–2). In the case of creep,Q was in the range of 0–11.5 J mol^–1 and larger when larger loads,m ₂ were removed during the later stages of creep.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe author wishes to thank Mr. Keizi Igarashi and Mr. Tetsuya Yasui for helping in the experiments.     

Clinical evaluation of immunoglobulin-E radioimmunoassay kit

An IgE RIA kit (Sandwich method; Dainabott), is used to obtain the following results. (1) Standard curve: Since the range of reproduction rate show 3.16-7.07% (C.V.), the curve become steep. (2) Incubations under controlled situation: Both of the incubations are controlled at 15-30 degrees C for 2 h. (3) Reproducibility test: Coefficients of variation (C.V.) of intra-assay and inter-assay variation are 2.32-3.94% and 2.92-3.92% respectively. (4) Recovery test: A result of the recovery test range between 100.1-101.7%. (5) Dilution test: Multiple dilution effects are observed. (6) Average counts of the serum IgE for the controlled and diseased groups: The average counts of the serum IgE for the controlled group, atopic diseased group, allergic rhinitis group and allergic bronchial asthma are 144.9 +/- 183.2 IU/ml, 1,099.0 +/- 2,782.4 IU/ml, 1,150.9 +/- 2,063.3 IU/ml and 600.7 +/- 686.4 IU/ml respectively. The value of the diseased groups have tendency to show higher averages than the controlled group. Since the controlled and diseased groups show wide distributions of the serum IgE level, there is no significant difference of two variations. However the diseased groups have tendency to show higher ratio of the serum IgE level in blood than the controlled groups. These basic researches are quite meaningful, because they are able to apply for a supplemental diagnosis of the atopic and parasitic disease.     

Vibrational spectra and molecular conformations of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes

The Raman and IR spectra of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes have been measured. The normal coordinates have been calculated for these molecules using a consistent set of force constants and the molecular conformations studied by analysing the spectra with reference to the results of the calculations. In the crystalline solid state, 1,5-dichloropentane assumes the trans-trans-trans-gauche form and 1,5-dibromopentane, 1,6-dichloro- and 1,6-dibromohexanes assume the all-trans form. The normal coordinate treatment with the well-established force field was of great help in determining the whole molecular form of the relatively large chain molecules.     

One‐Shot Double Elimination Process: A Practical and Concise Protocol for Diaryl Acetylenes

A variety of diaryl acetylenes were obtained in good yields when lithium hexamethyldisilazide was added to a solution of arylmethyl sulfone, aryl aldehyde, and chlorodiethylphosphate in THF. In this one‐shot process, a number of transformations such as aldol reaction, phosphorylation of aldolate, and double elimination of the resulting β‐substituted sulfone proceeded successively to afford the desired acetylenes. The one‐shot process was accelerated by the substitution of halogen atoms on the phenyl groups, and unsymmetrically substituted diaryl acetylenes were obtained without contamination of the dehalogenated products. Diaryl acetylenes with other substituents such as CF₃, ethoxycarbonyl, dimethylamino, TMS‐acetylene groups, as well as pyridinyl and thienyl moieties were also accessible with this method. However, methoxy‐substituted compounds were obtained in moderate yields under the same conditions, but the yields were increased when lithium diisopropylamide was used instead.     

Proton-block strategy for the synthesis of oligodeoxynucleotides without base protection,capping reaction,and P-N bond cleavage reaction

A new N-unprotected phosphoramidite method called the "proton-block" approach was developed for the chemical synthesis of oligodeoxynucleotides based on the hitherto simplest and rational principle of acid-base reactions. This concept involves protection of the nucleobases of deoxycytidine and deoxyadenosine with "protons" to convert them to unreactive protonated bases during condensation by use of promoters having pK(a) values lower than 2.8. This strategy was applied to the synthesis of d[CpT] and d[ApT] to check the side reactions associated with the base residues. In this "proton-block" method, 5-nitrobenzimidazolium triflate (NBT) was found to be the best promoter, and THF was superior to CH(3)CN as the solvent so that the concomitant detritylation due to the inherent acidity of the promoter could be greatly suppressed. Application of this strategy to the solid-phase synthesis gave d[CpT], d[ApT], d[ApA], d[CpC], and d[GpT] as almost single peaks in HPLC analysis. Similarly, d[ApApApT] and d[CpCpCpT] were successfully synthesized without significant side reactions. Finally, d[CpCpCpCpCpCpT] and d[ApApApApApApT] were obtained as the main products. In the case of a longer oligomer, d[CpApGpTpCpApGpTpCpApGpT], a mixed solvent of CH(3)CN-N-methylpyrrolidone (1:1, v/v) was superior to THF so that the desired oligodeoxynucleotide could be isolated in a satisfactory yield. These results suggest that DNA synthesis can be carried out simply by using the protonated bases at the oligomer level not only without base protection but also without the capping reaction and the posttreatment of branched chains with MeOH-benzimidazolium triflate that previously was requisite. It is concluded that most of the reactions and solvent effects involved in this strategy can be explained in terms of simple acid-base reactions. Some problems associated with the previous posttreatment are also discussed with our own results.     

Quantitative analysis of hyaluronic acid by high-performance liquid chromatography of streptomyces hyaluronidase digests

The separation and quantitative analysis of streptomyces hyaluronidase ( HAase ) degradation products of hyaluronic acid (HA) by high-performance liquid chromatography are described. The substituted 4,5-unsaturated tetrasaccharide and hexasaccharide which result from the digestion of HA are quickly separated on a silica gel (Zorbax SIL) column. The assay of HA is linear between 5 and 250 micrograms of HA. This procedure is suitable for some weakly acidic glycosaminoglycan contaminants having similar properties to those of HA.     

Multiplex amplified product-length polymorphism analysis of 36 mitochondrial single-nucleotide polymorphisms for haplogrouping of East Asian populations

We present a reliable, rapid, and economical multiplex amplified product-length polymorphism (APLP) method for analyzing the haplogroup-diagnostic mitochondrial single-nucleotide polymorphisms (mtSNPs) in East Asian populations. By examining only 36 haplogroup-specific mtSNPs in the coding region by using four 9-multiplex polymerase chain reaction (PCR) and subsequent electrophoresis, we could safely assign 1815 individuals from 8 populations of Japanese, Korean, Chinese, and Germans to 45 relevant haplogroups. This multiplex APLP analysis of coding-region mtSNPs for haplogrouping is especially useful not only for molecular phylogenetic studies but also for large-scale association studies due to its rapid and economical nature. This is the first panel of mtSNPs in the coding region to be used for haplogrouping of East Asian populations.     

Adsorption mechanism of polylysine on hydroxyapatite and its effect on dissolution properties of hydroxyapatite

Adsorbed amounts of poly-l-lysine (pLys) and bromide ion on hydroxyapatite (HAp) from aqueous solutions of poly-l-lysine hydrobromide, and amounts of calcium and phosphate ions liberated concurrently from HAp during the adsorption of pLys were determined at 25 degrees . The pLys was adsorbed on HAp by the mechanism of ion-exchange between its amino groups and calcium ions of HAp. The released amount of calcium ion increased, therefore, with the adsorbed amount of pLys. On the other hand, the released amount of phosphate ion first decreased and then increased after attaining a minimum with the equilibrium concentration of pLys. The analysis using an equilibrium dialysis method revealed that the released phosphate ions were mainly in the bound state to the amino groups of pLys remaining in the solution, and that the concentrations of calcium and phosphate ions free from both HAp and pLys were restricted by each other under the law of the solubility product of HAp. The first decrease in the released amount of phosphate ion was concluded to be attributed primarily to the increase in the released amount of calcium ion because pLys remaining in the solution was little in this region. When sodium hydroxide was added to the solution, the adsorbed amount of pLys increased and then slightly decreased with the equilibrium pH of the solution due to the increase or decrease of the electrostatic attractive force between the adsorbate and the adsorbent. However, conformational change in pLys around pH 10 seemed to have little effect on the adsorption.     

Characterization of an avidin-bonded column for direct injection in reversed-phase high-performance liquid chromatography

An automatic method for the determination of metabolites of Ropivacaine in urine was set up. It utilizes supported liquid membrane extraction for sample clean-up and enrichment, followed by ion-pair chromatography determination using UV detection. The extraction was very selective with no observed interfering compounds from the urine matrix, permitting simple isocratic chromatographic analysis. The detection limits for spiked urine samples were 2–18 nM for the different compounds. The repeatability was 1–3% (RSD) with an internal standard that was also extracted, and about twice without this standard. A throughput of 3.3 samples per hour was achieved and the liquid membrane was stable for more than a week.     

Targeting of mitomycin C to the liver by the use of asialofetuin as a carrier.

Desialylated fetuin (asialofetuin) was adopted as a carrier for introducing drugs in parenchymal liver cells. Mitomycin C, as a model guest-compound, was covalently attached to asialofetuin through a spacer of the succinyl group. The asialofetuin-mitomycin C conjugate contained 4.4 w/w% of mitomycin C and liberated it gradually at physiological conditions (t1/2 = 37 h). The survival time of the conjugate in rat blood circulation was significantly smaller than that of the non-desialylated fetuin conjugate; the elimination half-life was 7.3 min after intravenous injection. At 30 min after injection of the conjugate in rats, 40% of the dose was present in the liver. Parenchymal cells in the liver selectively took up the conjugate, which was highly distributed to the lysosomal fraction in the cell. The greater uptake of the conjugate by hepatocytes reflected the increased excretion in the bile; totally 10.4% of the dose was recovered.