Charge fractionalization in biased bilayer graphene

Fractional charge may arise when fermionic zero modes exist in a topological background field. In biased bilayer graphene (BBLG), the bias plays the role of the nontrivial background field. When semi-infinite BBLG with a zigzag edge is used, the dynamics induces an odd number of zero-energy modes, which, together with the conjugation symmetry between positive-?and negative-energy states, are the requisite conditions for fractionalization. Exploiting the trigonal interaction to isolate a given zero-energy mode on the zigzag edge, we consider extended and localized modes (the latter being obtained from a localized wavepacket generated by prior irradiation of the sample with an electromagnetic vortex). The valley degeneracy is lifted by a layer asymmetry, while an edge-induced spin polarization breaks the spin degeneracy. We describe scenarios for the detection of charge-[Formula: see text] edge states.     

Giant Faraday and Kerr rotation with strained graphene

Polarized electromagnetic waves passing through (reflected from) a dielectric medium parallel to a magnetic field undergo Faraday (Kerr) rotation of their polarization. Recently, Faraday rotation angles as much as 0.1?rad were observed for terahertz waves propagating through graphene over a SiC substrate. We show that the same effect is observable with the magnetic field replaced by an in-plane strain field which induces a pseudomagnetic field in graphene. With two such sheets a rotation of π/4 can be achieved, which is the required rotation for an optical diode. Similarly a Kerr rotation of 1/4 rad is predicted from a single reflection from a strained graphene sheet.     

空心微球结构Au/Ag合金泡沫块体的制备

将平均晶粒尺寸为4.6 nm的金粒子通过静电作用粘附于聚苯乙烯（PS）微球表面用于化学镀,化学镀金后PS表面的金沉积层几乎达到完全包覆,厚度70~90 nm;在Au/PS表面进行化学镀银,沉积的银颗粒堆积紧密,颗粒大小较先前沉积的金颗粒大,镀覆层厚度增厚至200~400 nm;模板去除后,获得了完全自支撑的Au40Ag60空心微球结构的圆柱状泡沫材料。制备的金银合金泡沫由直径约10 m的空心球壳组成,圆柱体直径约5 mm,密度约1.2 g/cm3。     

冲击加载下Zr51Ti5Ni10Cu25Al9金属玻璃的塑性行为

进行了10—27 GPa应力范围内Zr₅₁Ti₅Ni₁₀Cu₂₅Al₉金属玻璃的平面冲击实验以研究其高压-高应变率加载下的塑性行为.由样品自由面粒子速度剖面的分析获得了冲击加载过程的轴向应力,并通过轴向应力与静水压线的比较获得剪应力.实验结果表明,尽管存在明显的松弛效应,但Zr基金属玻璃的Hugoniot弹性极限随着冲击应力的增加而增加.然而,塑性波阵面上的剪应力则显示先硬化而后软化现象,而且软化的幅度随冲击应力的增加而增加.冲击加载下Zr基金属玻璃的上述剪应力变化特征与分子动力学模拟结果比较一致,但与压剪实验结果和一维应力冲击实验结果明显不同.     

Synthesis and optical properties of SnO2-CuO nanocomposite

SnO₂-CuO nanocomposite was synthesized by impregnating SnO₂ nanowires with CuCl₂ solution and subsequent calcination. SEM and XRD were used to characterize the morphology and structure of the product. The optical properties were analyzed by Raman and photoluminescence (PL) spectra at room temperature. Except the strong orange emission of SnO₂, the PL spectrum showed a red shoulder at 678 nm which originated from the interface between SnO₂ and CuO.     

Development of an Optical Fiber Lactate Sensor

Lactate analysis is important in clinical diagnostics and the food industry. An ultrasensitive optical fiber lactate sensor with rapid response time and 50?μm size has been developed. Lactate dehydrogenase (LDH) has been directly immobilized onto an optical fiber probe surface through covalent binding mechanisms. The optical fiber surface is initially activated by silanization, which adds amine groups (–NH₂) to the surface. Aldehyde functional groups (–CHO) are then affixed to the optical fiber surface by employing a bifunctional cross-linking agent, glutaraldehyde. The amino acids of LDH enzyme molecules readily attach to these free -CHO groups on the fiber surface. Optimal immobilization of LDH occurs between 19 and 23 hours of exposure in the enzyme solution. The immobilized LDH enzyme molecules on the fiber surface show high enzymatic activity. The lactate sensor is able to detect lactate with a concentration detection limit of 0.5?μM and the absolute mass detection limit is 8.75 attomoles. Moreover, the sensor rapidly responds to lactate changes and exhibits good reproducibility. The lactate sensor is extremely selective. This immobilized enzyme sensor has been applied to accurately determine the lactate content in food samples.     

Theoretical exploration of the cooperative effect in NMF-NMF-amino acid residue hydrogen bonding system

This paper presents a theoretical study of the cooperative effect in sixteen linearly-arranged trimer systems consisting of N-methylformamide dimer and an extra amino acid residue. These trimer systems, NMF-NMF-AAR, in short, have been systematically investigated by full optimization at B3LYP/cc-pVTZ level and subsequent electronic energy calculations at PBE1PBE/cc-pVTZ, HF/cc-pVTZ and MP2/cc-pVTZ, respectively. Obvious spatial transformation due to energetic factors has been found in almost all the trimers. Systematic analysis in weak interaction energy components has shown that: (1) in these trimer systems, the bonding structure and the cooperative effect combine to determine the stability of both HB1 and HB2. For HB2, the structure of the constituent amino acid residue also plays a crucial role by interfering with the neighboring moieties; (2) the large contribution of the cooperative effect to the overall hydrogen bonding energy has claimed the importance of cooperativity in our systems; (3) the non-hydrogen bonding weak interaction components are found to be non-negligible in these trimer systems; (4) moreover, the cooperative effect between these non-hydrogen bonding components is always found to be positive. The good performances of PBE1PBE and PM6 have been established by comparisons between these methods.     

Preparation and characterization of thermoplastic elastomer of poly(vinyl chloride) and chlorinated waste rubber

In order to develop applications for the abundant waste rubber powder, chlorinated waste rubber (Cl-WR) was prepared by a water based chlorination method using chlorine as chlorinating agent. In this paper, Cl-WR was used as an elastic filler and blended with poly(vinyl chloride) (PVC) matrix to develop a new thermoplastic elastomer PVC/Cl-WR. The mechanical properties, hydrophilicity, swelling resistance, morphology and thermal properties of PVC/Cl-WR were characterized and compared with those of PVC/waste rubber powder (PVC/WR) blends. The results indicated that the mechanical properties, hydrophilicity, swelling resistance and thermal properties of the PVC/Cl-WR blends showed noticeable improvements over PVC/WR blends due to the improved polarity of Cl-WR. Also, the excellent miscibility and compatibility of Cl-WR with PVC was demonstrated by scanning electron microscope (SEM) images of the resulting blends.     

Protective Effect of Flavonoids from Mulberry Leaf on AAPH-Induced Oxidative Damage in Sheep Erythrocytes

To evaluate the antioxidant activity of flavonoids extracted from Chinese herb mulberry leaves (ML), flavonoids from mulberry leaves (FML) were extracted and purified by using ultrasonic-assisted enzymatic extraction and D101 macroporous resin. Using LC-MS/MS-Liquid Chromatography with tandem mass spectrometry analysis, hesperidin, rutoside, hyperoside, cyanidin-3-o-glucoside, myricitrin, cyanidin, and quercetin were identified, and NMR and UV were consistent with the verification of IR flavonoid characteristics. The antioxidant activity of FML has also been evaluated as well as the protective effect on 2,2 0-azobis (2-amidinopropane) dihydrochloride (AAPH)-induced oxidative stress. The results showed that FML exhibited powerful antioxidant activity. Moreover, FML showed dose-dependent protection against AAPH-induced sheep erythrocytes’ oxidative hemolysis. In the enzymatic antioxidant system, pretreatment with high FML maintained the balance of SOD, CAT, and GSH-Px; in the non-enzymatic antioxidant system, the content of MDA can be effectively reduced after FML treatment. This study provides a research basis for the development of natural products from mulberry leaves.