Mn替代对Dy2AlFe16-xMnx化合物的结构和磁性的影响

通过X射线衍射及磁测量手段研究了Dy2AlFe16-xMnx化合物的结构和磁性.研究结果表明Dy2AlFe16-xMnx化合物具有六角相的Th2Ni17型结构.对x=1,2的样品采用X射线热膨胀测定法在104-647K的温度范围内测量了其热膨胀性质,发现这些化合物在低温下存在热膨胀反常现象,在居里点附近出现负膨胀性质.对自发磁致伸缩的研究结果表明Dy2AlFe16-xMnx化合物中存在着较强的各向异性的自发磁致伸缩,随着Mn含量的增加,其低温下的自发体磁致伸缩减弱.磁测量结果表明Mn的替代导致Dy2AlFe16-xMnx化合物的居里温度及自发磁化强度急剧下降.     

Simulation of island aggregation influenced by substrate temperature, incidence kinetic energy and intensity in pulsed laser deposition

Using kinetic Monte Carlo method, we have simulated a pulsed energetic growth process in pulsed laser deposition. During the growth of film, substrate temperature mainly influences upon film morphology by directly enhancing the adatom mobility through the temperature-dependent thermal vibration. By contrast, the effect of incidence kinetic energy on film growth is complex resulting from the collisions between the incident particles and the adatoms. The results show that improving incident kinetic energy cannot significantly accelerate the migration rate of adatom but change surface microstructure and promote single adatom formation resulting in more island aggregation density. Moreover, since pulse-influx characterizes pulsed laser deposition, the intensity per pulse contributes to the evolvement of nucleation density and the results illustrate that a general scaling law different from ordinary power law still exists in energetic growth of pulsed laser deposition.     

A Convenient Synthetic Method of Metal Dendritic Porphyrins

Metal porphyrins are natural antioxidant reagent1-3. However, due to the characteristics of structures, they are only soluble in inorganic acids and part of polar organic solvents. Thus, it is limited to be used as effective pharmaceutical preparations. T…     

一类非线性方程存在多个极限环的一个充分条件

关于方程(1)的极限环唯多性问题,不少人作了研究,[1]引进“n重互相包含”曲线类,,经[2]的改进获得较好的结果,但这类曲线要求的条件较多。本文不从[1]的观点出发,不包含[1]的全部条件,独立地用①11。’,LtnnoB变换折叠相平面,据轨线与折叠线交点的位置,对(1)的等价方程按线性方程积分,将积分的正负项作成比值进行比较,得出一组充分条件。     

现场拉曼光谱研究乙腈在金电极上的解离吸附行为

利用共焦显微拉曼系统、结合合适的电极表面粗糙方法研究了非水体系 0 1mol/LLiClO4 /CH3CN溶液中 ,乙腈分子在金表面的吸附和解离行为。结果表明非水体系中乙腈可在金表面发生还原反应 ,产物CN- 离子与电极表面作用形成的表面配合物可在较宽的电位区间吸附于电极表面。溶液中的微量水、激光照射以及电极电位均对该反应有较大的影响。通过拉曼谱图的比较得出乙腈分子解离出的CN- 在金电极表面比在银电极表面有更强的吸附作用。     

Acoustic vector sensor signal processing

Acoustic vector sensor simultaneously, colocately and directly measures orthogonal components of particle velocity as well as pressure at single point in acoustic field so that is possible to improve performance of traditional underwater acoustic measurement devices or detection systems and extends new ideas for solving practical underwater acoustic engineering problems. Although acoustic vector sensor history of appearing in underwater acoustic area is no long, but with huge and potential military demands, acoustic vector sensor has strong development trend in last decade, it is evolving into a one of important underwater acoustic technology. Under this background, we try to review recent progress in study on acoustic vector sensor signal processing, such as signal detection, DOA estimation, beamforming, and so on.     

Ab Initio Study on the Isomerization and Dehydrogenation of Methylnitrene

The ab initio calculations were performed at the RHF/4-31G level with the reaction pathways of the iso-merization and dehydrogenation of methylnitrene by the intrinsic reaction coordinate method. The results show that the transformation from methylnitrene to methylenimine would be very easy. This accountes for the experimental fact that one couldn' t find the methylnitrene, but only obtained the methylenimine in the pyrolysis of methyl azide. The mode-selective study reveals the reaction coordinates (IRC) of isomerization and dehydrogenation of methylnitrene are associated with the molecular deformation mode of 1191 cm-1 and the methyl group unsymmetrical stretch mode, respectively. The coupling between normal coordinates is favourable to select the reaction channel of isomerization.     

Ce3+-冠醚配合物的紫外有机电致发光

采用5d-4f跃迁的稀土Ce³⁺-冠醚配合物(Ce-二环己基并-18-冠-6,Ce-DC18C6)作为发光掺杂剂,4,4'-二(9-咔唑基)联苯(CBP)为基质,设计制备了紫外发光器件:ITO/CuPc/Ce-DC18C6:CBP/Bu-PBD/LiF/Al,首次观测到峰位于376nm的Ce³⁺离子的紫外电致发光。通过对比器件的EL谱与Ce³⁺-冠醚配合物薄膜的PL谱发现,EL光谱中有部分来自Ce³⁺配合物中的Ce³⁺离子的。这种5d-4f电子跃迁的掺杂质量分数为3%时,该UV-发光器件的最大辐射功率为13μW/cm²。     

考虑材料熔化潜热的高温高压本构

本文在修正的SCG模型基础上，提出了一种考虑了熔化潜热的高温高压本构.该本构所给出的铝的剪切模量的变化分为三个阶段：加工硬化，温度软化和熔化，并在完全熔化点处变为零.并且在前两个阶段，计算的结果与修正的SCG模型所给出的剪切模量的差别不超过4%，这一差别是在动高压实验误差范围之内的，在熔化区所给出的剪切模量与现有的实验数据相符合. 关键词： 剪切模量 熔化潜热 修正的SCG模型 动高压实验     

部分相干光束通过硬边光阑的推广光束传输M2因子

给出部分相干光通过硬边光阑后的强度二阶矩的计算公式，由此可得到部分相干光通过硬边光阑后的推广光束传输M^2因子。以部分相干高斯－谢尔模型光束为例，推导出相应的M^2因子，并作了数值计算和分析讨论。