微乳液介质—1—（2—吡啶偶氮）—2—萘酚光度法测定汽油中环烷酸铁的含量

本研究了微乳液为介质时，铁与１－（２－吡啶偶氮）－２－萘酚（ＰＡＮ）的显色反应。选择７３０ｎｍ处为测定波长，ε为１．４×１０＾４Ｌ．ｍｏｌ＾－＾１．ｃｍ＾－＾１，铁量在０－５０μｇ／２５ｍｌ范围内符合比耳定律，该法适用于汽油中环烷酸铁的测定。     

Study on the new fluorescence enhancement system of Tb-1,10-bis(2′-carboxylphenyl)-1,4,7,10-tetraoxadecane in silver chloride collosol and its analytical application

A new salicylic-based open-chain crown ether ligand, 1,10-bis(2′-carboxylphenyl)-1,4,7,10-tetraoxadecane (BCPTD) was synthesized. Solutions of its complex with Tb³⁺ can emit the intrinsic fluorescence of Tb³⁺. The fluorescence intensity of the complex in KCl solution was enhanced by the addition of silver(I), leading to a new fluorescence enhancement phenomenon. The spectrofluorimetric determination of traces of silver(I) based on the above phenomenon was carried out. The excitation and emission wavelengths are 298 and 545 nm, respectively. Under optimal conditions, the differential value of fluorescence intensity in the absence and presence of Ag⁺ was proportional to the concentration of silver(I) in the range 0.5-20 μg ml⁻¹. The method was applied to the determination of silver(I) in a standard ore sample. The analytical performance is investigated in detail by using common aromatic carboxylic acids or synthetic analogues of BCPTD as ligands to replace BCPTD. It was found that Tb-aromatic acid complexes did not result in fluorescence enhancement of Tb³⁺ in AgCl collosol. The phenomenon was only observed in Tb(III) with BCPTD or its open-chain crown ether analogues solutions.In addition, the enhancement of the fluorescence intensity of terbium(III) in these complexes depends on the extent of formation of the AgCl collosol.     

Speciation of dissolved iron(II) and iron(III) in environmental water samples by gallic acid-modified nanometer-sized alumina micro-column separation and ICP-MS determination

A method has been developed for the speciation of trace dissolved Fe(II) and Fe(III) in water by coupling gallic acid (GA) modified nanometer-sized alumina micro-column separation with inductively coupled plasma mass spectrometry (ICP-MS). The separation of Fe(II) and Fe(III) was achieved based on the obvious difference in reaction kinetics between Fe(II) and Fe(III) with GA. Fe(III) was selectively retained on the micro-column at pH 5.5-6.5, while Fe(II) could not be retained by the micro-column at the whole tested pH range of 1.0-6.5, and passed through the micro-column. The Fe(II) can be determined by ICP-MS directly without preconcentration/separation procedure, while Fe(III) retained on the micro-column was then eluted with 1.0 mL of 1 mol L(-1) HCl and determined by ICP-MS. The parameters affecting the separation of Fe(II) and Fe(III) were investigated systematically and the optimum separation conditions were established. Under the optimized conditions, the detection limits of 0.48 microg L(-1) and 0.24 microg L(-1) with relative standard deviation of 5.6% and 4.3%(C= 5 microg L(-1), n= 7) for Fe(II) and Fe(III) were found, respectively. No obvious effect on the speciation of Fe(II) and Fe(III) was found with the change of the ratio of Fe(II) and Fe(III) from 0 ratio 10 to 10 ratio 0. The proposed method was applied for the determination of trace Fe(II) and Fe(III) in environmental water and the recoveries for spiked samples were found to be in the range of 97-105%.     

Synthesis and Kinetic Study on the Chromium(III) Complex [Cr(ASA)(en)2]Cl·2H2O

In order to explore the transfer mechanism of chromium(III) in mammals, a novel complex [Cr(ASA)(en)₂]Cl· 2H₂O, bis(ethylenediamine‐ κ ² N,N′)(4‐aminosalicylic acid‐ κ ² O,O′) chromium(III) monochloride dihydrate was synthesized (4‐aminosalicylic acid=H₂ASA, ethylenediamine=en). The crystal structure belongs to orthorhombic system with the space group P2₁2₁2₁ by means of X‐ray diffraction. The characteristic for transfer of Cr³⁺ from the compound to the low‐molecular‐mass chelator EDTA and the iron‐binding protein apoovotransferrin (apoOTf) was followed by UV‐visible (UV‐Vis) and fluorescence spectra in 0.01 mol·L^?1 Hepes at pH 7.4. The second order rate constants were calculated. Those spectra in conjunction were used to obtain more accurate information about the interaction of chromium complex with apoOTf. The experimental results indicate that Cr³⁺ can be transferred from the complex to apoOTf with the retention of the 4‐aminosalicylic acid acting as a synergistic anion.     

Enantioselective transition metal catalysis directed by chiral cations

Enantioselective transition metal catalysis directed by chiral cations is the amalgamation of chiral cation catalysis and organometallic catalysis. Thus far, three strategies have been revealed: ligand scaffolds incorporated on chiral cations, chiral cations paired with transition metal ‘ate’-type complexes, and ligand scaffolds incorporated on achiral anions. Chiral cation ion-pair catalysis has been successfully applied to alkylation, cycloaddition, dihydroxylation, oxohydroxylation, sulfoxidation, epoxidation and C–H borylation. This development represents an effective approach to promote the cooperation between chiral cations and transition metals, increasing the versatility and capability of both these forms of catalysts. In this review, we present current examples of the three strategies and suggest possible inclusions for the future.

Enantioselective transition metal catalysis directed by chiral cations is the amalgamation of chiral cation catalysis and organometallic catalysis.     

Zig‐Zag Diphosphene Oligomers Linked by Silver(I) Cation

The coordination of silver cation to diphosphene Mes*P=PMes* ( 1 , Mes* = ^tBu₃C₆H₂) was investigated in detail. The reaction of 1 with Ag[Al(OR_F)₄] (OR_F = OC(CF₃)₃) in the ratios of 2 : 1, 3 : 2 and 1 : 2 led to the formation of the first cationic silver linked diphosphene complexes 2 — 4 . Complexes 2 and 3 contain two and three diphosphene molecules linked by the linear Ag(I) cation, respectively, and they feature unusual zig‐zag topologies. Complex 4 is a dinuclear silver complex, and each Ag(I) center features a tetrahedral geometry, coordinated by one phosphorus atom of diphosphene 1 and three chloro atoms of two CH₂Cl₂ molecules.     

Voltammetric studies of microcrystalline C60 adhered to a carbon electrode surface and placed in contact with aqueous electrolyte containing potassium ions

The reduction of microcrystalline C₆₀ fullerene, adhered at a carbon electrode and immersed in aqueous electrolyte, has been studied under various voltammetric conditions. This work reports mainly the voltammetric studies carried out principally in electrolyte containing potassium ions. Comparison of adherence techniques, such as solvent casting and mechanical transfer methods, are made to assess if the type of adhered techniques has any significant influence on the observed electrochemistry. The solvent casting method is found to produce three peaks in the potential for C₆₀^0/n- redox couple as compared to a single and large peak produced when a mechanical transfer technique is employed. When the reduction potential of microcrystalline C₆₀ in the presence of K⁺ is compared with other cations, such as Li, Na, Rb and Cs, it is observed that the shift of reduction potential follows the change in the hydration energy in the order Cs>Rb>K>Na>Li. In a mixed electrolyte study of CsCl/KCl, the reduction potential and peak shape of C₆₀^0/n- redox couple during cyclic voltammetry is observed to change with concentration of the cations and the observed electrochemistry can be attributed to a cation-exchange mechanism. The reduction of C₆₀ is irreversible in aqueous electrolyte containing alkaline cations as the re-oxidation process does not produce any observed electro-activity. Evidence of the formation of a passive coating of K _n C₆₀ fulleride, which does not appear to undergo dissolution is obtained under cyclic voltametric conditions. This coating remains electrochemically active in the presence of tetrabutylammonium ions in acetonitrile. Scan rate, chronocoulometric, and scanning electron microscopic studies provide evidence of the presence of a surface process involving solid–solid transformation.     

Molecular Recognition Study on a Supramolecular System. Part 21. Inclusion Complexation Thermodynamics of Aliphatic Alcohols by Organoselenium Modified β-Cyclodextrins

The spectrophotometric titrations have beenperformed at 25–40 °C in aqueous solution to give the complexstability constants and the thermodynamic parametersfor the stoichiometric 1 : 1 inclusion complexation ofvarious aliphatic alcohols withmono[6-(phenylseleno)-6-deoxy]--cyclodextrin (2),mono[6-(o-, m-,p-tolylseleno)-6-deoxy]--cyclodextrin (3–5),mono[6-(p-chloro-phenyl-seleno)-6-deoxy]--cyclodextrin(6), mono[6-(benzylseleno)-6-deoxy]--cyclodextrin (7) and mono[6-(naphthaleneseleno)-6-deoxy]--cyclodextrin(8). On thebasis of the present and previous results, themolecular binding abilities and selectivities forguest aliphatic alcohols of the host -cyclodextrinderivatives (2–8) are discussed comparatively and globallyfrom the thermodynamic point of view. Thethermodynamic parameters obtained are criticalfunctions of the size/shape of aliphatic alcohols, andthe position and type of the substituent introduced tothe aromatic ring of -cyclodextrin's sidearm,which are elucidatedin terms of the conformational, electrostatic,hydrogen-bonding, and hydrophobic effects.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .