Photochromic and photomechanical ionene elastomer containing poly(tetrahydrofuran) segments and viologen units

Elastomeric polymer consisting of poly(oxytetramethylene) segments and viologen units (PTV) was synthesized by the reaction of dicationic living poly(tetrahydrofuran) with 4,4′-bipyridine at ?70°C. The chloride or bromide ion was introduced as the counter anion into the viologen groups of PTV by the treatment of the reaction mixture with aqueous sodium chloride or bromide, respectively. The solid film of PTV having chloride inon showed photochromism, i.e., color change by light irradiation, via photoreduction of the violegen groups. In contrast. PTV of bromide counter anion required a small amount of poly(N-vinyl-2-pyrrolidone) to undergo the photochromic reaction. The irradiation of light also affected the stress relaxation of the polymers, namely PTV showed photomechanical behavior. This phenomenon is considered to be induced by the decrease of total number of ionic charges of PTV by photo-reduction of the viologen groups followed by the change of a state of ionic clustering in the polymer matrix.     

Introduction of a hydroxy group at the para position and N-iodophenylation of N-arylamides using phenyliodine(III) bis(trifluoroacetate)

The reaction of anilides with phenyliodine(III) bis(trifluoroacetate) (PIFA) in trifluoroacetic acid (TFA), TFA-CHCl3, or hexafluoroisopropyl alcohol (HFIP) is described. When the acyl group of the anilide is highly electronegative, such as trifluoroacetyl, or the phenyl group is substituted with an electron-withdrawing group, the 4-iodophenyl group is transferred from PIFA to the amide nitrogen to afford acetyldiarylamines. On the other hand, when the acyl group contains an electron-donating function, such as 4-methoxyphenyl, or the phenyl group is substituted with an electron-donating group, a trifluoroacetoxy group is transferred to the para position of the anilide aromatic ring. This group is hydrolyzed during workup to produce the corresponding phenol.     

Determination of trichloroacetate in human serum and urine by ion chromatography

A simple and rapid ion chromatographic method has been developed for the determination of trichloroacetate in human serum and urine. Two short (50 x 5 mm i.d.) low-capacity anion-exchange resin columns in series were used as the analytical column and a mixture of 35 mM sodium hydroxide, 20 mM p-hydroxybenzonitrile and 2% V/V acetonitrile (pH 12.3) as the eluent. The calibration graph was rectilinear from 0.3 to 33 mg l-1 of trichloroacetate at 10 microS with a detection limit (3 sigma) of 0.08 mg l-1. The recovery of trichloroacetate, obtained by analysing spiked serum and urine samples, was in the range 98.2-101% and the coefficient of variation was always less than 3.0%.     

Studies on the chemical synthesis of potential antimetabolites. 30. Regioselective introduction of a chlorine atom into the imidazo[4,5-b]pyridine nucleus

Reactions of some imidazo[4,5-b]pyridine 4-oxides with phosphoryl chloride are described. Treatment of N-1-substituted imidazo[4,5-b]pyridine 4-oxides with phosphoryl chloride led to the predominant formation of 7-chloro derivatives. This feature was successfully applied to the preparation of a chloroimidazo[4,5-b]pyridine nucleoside, which served as an important precursor of 1-deazaadenosine.     

Excitation-energy dependence of phosphorescence quantum yield of benzaldehyde vapour at low pressure

The phosphorescence quantum yield of benzaldehyde vapour was measured at low pressure (down to 2 mtorr) as a function of excitation wavelength. The quantum yield is essentially constant in the range of excitation energy corresponding to the S₁(n,π^*) state, but it decreases very rapidly as the excitation energy is raised to the value corresponding to S₂(π,π^*), indicating that the phosphorescence property of the benzaldehyde molecule varies, depending on the nature of the singlet state to which the molecule is initially excited.     

Exciplex formation in aromatic copolymers and photoinduced electron transfer from exciplex to acceptor

The exciplex formation in 9-vinylphenanthrene-p-N,N-dimethylaminostyrene copolymers, its characteristics, and the electron transfer process in polar solvents were studied. The copolymer exhibited a more intense intramolecular exciplex fluorescence than the low-molecular-weight model system, phenanthrene-N,N-dimethylaniline, in which the intermolecular exciplex formation occurred. Intensities of the exciplex fluorescence, which were unchanged regardless of the copolymer composition, led us to speculate that the efficient energy migration takes place from an excited phenanthrene unit to an exciplex forming site on the polymer chain. The electron transfer in the copolymer-p-dicyanobenzene system was studied in polar media. The formation of p-dicyanobenzene anion radical was measured by flash photolysis and electron spin resonance (ESR). p-Dicyanobenzene anion radical was generated by the electron transfer process via exciplex and the direct electron transfer process from the excited phenanthrene unit in the copolymer.     

Synthesis and evaluation of guanidine-containing Schiff base copper(II), zinc(II), and iron(III) chelates as trypsin inhibitors

3-Formyl-4-hydroxyphenylguanidine hydrochloride and its Schiff base copper(II), zinc(II), and iron(III) chelates were synthesized and their inhibitory activity against bovine beta-trypsin were determined. Syntheses of Schiff base metal chelates were carried out from 3-formyl-4-hydroxyphenylguanidine, various L-amino acids, and divalent metal acetate. Their structures were established on the basis of spectroscopic evidence and elemental analysis. The inhibitory activity of these chelates against bovine beta-trypsin was determined. The guanidine-containing copper(II) and zinc(II) chelates behaved as potent competitive inhibitors of trypsin. However, similar inhibitory activity was not observed for guanidine-containing iron(III) chelates. The inhibition constants (K(i) values, ca. 10(-5) M) of guanidine-containing Schiff base copper(II) and zinc(II) chelates were slightly lower than those (ca. 10(-6) M) of the corresponding amidine-containing Schiff base chelates with regard to bovine trypsin.     

Thin film composite optical waveguides for sensor applications: a review

We review the design and fabrication of thin-film composite optical waveguides (OWG) with high refractive index for sensor applications. A highly sensitive optical sensor device has been developed on the basis of thin-film, composite OWG. The thin-film OWG was deposited onto the surface of a potassium-ion-exchanged (K⁺) glass OWG by sputtering or spin coating (5–9 mm wide, and with tapers at both ends). By allowing an adiabatic transition of the guided light from the secondary OWG to the thin-film OWG, the electric field of the evanescent wave at the thin film was enhanced. The attenuation of the guided light in the thin film layer was small, and the guided light intensity changed sensitively with the refractive index of the cladding layer. Our experimental results demonstrate that thin-film, composite OWG gas sensors or immunosensors are much more sensitive than sensors based on other technologies.     

Substituent effects of beta-diketiminate ligands on the structure and physicochemical properties of copper(II) complexes

Substituent effects of beta-diketiminate ligands on the structure and physicochemical properties of the copper(II) complexes have been systematically investigated by using 3-iminopropenylamine derivatives R1LR3H, R3-N=CH-C(R1)=CH-NH-R3, where R1 is Me, H, CN, or NO2, and R3 is Ph, Mes (mesityl), Dep (2,6-diethylphenyl), Dipp (2,6-diisopropylphenyl), or Dtbp (3,5-di-tert-butylphenyl). When the ligands with R3=Ph or Dtbp were treated with CuII(OAc)2, bis(beta-diketiminate) copper(II) complexes exhibiting distorted tetrahedral geometries were obtained, the crystal structures of which were nearly the same as each other regardless of the alpha-substituent (R1); dihedral angles between the two beta-diketiminate coordination planes are 62.5 +/- 1.2 degrees, and the Cu-N bond lengths are 1.959 +/- 0.008 A. The distorted tetrahedral structures are maintained in solution, but the spectroscopic features, especially gII values of the ESR spectra and the d-d bands of the absorption spectra, as well as the electrochemical behaviors of the complexes, are significantly affected by the electronic nature of R1. The ligands with R3=Mes and Dep, on the other hand, gave di(mu-hydroxo)dicopper(II) complexes, and their crystal structures as well as spectroscopic and electrochemical features have also been explored. Furthermore, the ligand with the more sterically encumbered aromatic substituent (Dipp) provided a mononuclear four-coordinate square planar copper(II) complex supported by one beta-diketiminate ligand and one didentate acetate ion. Thus, the beta-diketiminate ligands with a variety of substituents (R1 and R3) have been explored to provide coordinatively unsaturated (four-coordinate) mononuclear and dinuclear copper(II) complexes with significantly different coordination geometry and properties.     

Structures and redox reactivities of copper complexes of (2-pyridyl)alkylamine ligands. Effects of the alkyl linker chain length

Ligand effects on the structures and redox reactivities of copper complexes have been examined using (2-pyridyl)alkylamine derivatives as the supporting ligands, where particular attention has been focused on the effects of the alkyl linker chain length connecting the tertiary amine nitrogen atom and the pyridine nucleus: N[bond]CH(2)[bond]Py (Pym) vs N[bond]CH(2)CH(2)[bond]Py (Pye). X-ray crystallographic analysis of the copper(I) complex of tridentate ligand (Phe)L(Pym2) [N,N-di(2-pyridylmethyl)-2-phenylethylamine] (complex 1) has demonstrated that it possesses a trigonal pyramidal geometry in which a d[bond]pi interaction with an eta(1)-binding mode exists between the metal ion and one of the ortho carbons of the phenyl ring of the ligand side arm (phenethyl). The result shows sharp contrast to the d[bond]pi interaction with an eta(2)-binding mode existing in the copper(I) complex of (Phe)L(Pye2) [N,N-di[2-(2-pyridyl)ethyl]-2-phenethylamine] (complex 2). Such a d-pi interaction has been shown to affect the stability of the copper(I) complex in CH(2)Cl(2). Oxygenation of copper(I) complex 1 supported by (Phe)L(Pym2) produces a bis(mu-oxo)dicopper(III) complex, also being in sharp contrast to the case of the copper(I) complex 2 with ligand (Phe)L(Pye2), which preferentially affords a (micro-eta(2):eta(2)-peroxo)dicopper(II) complex in the reaction with O(2). Such an effect of the alkyl linker chain length of the metal binding site has also been found to operate in the RSSR (disulfide)/2RS(-) (thiolate) redox system. Namely, ligand (S2,R)L(Pym1) (di[2-[(alkyl)(2-pyridinylmethyl)amino]ethyl] disulfide) with the methylene linker group (Pym) induced the reductive disulfide bond cleavage in the reaction with copper(I) ion to give a bis(micro-thiolato)dicopper(II) complex, while the ligand with the ethylene linker group (Pye), (S2,Bn)L(Pye1) (di[2-[(benzyl)(2-(2-pyridinyl)ethyl)amino]ethyl] disulfide), gave a disulfide-dicopper(I) complex. These ligand effects in the Cu(2)[bond]O(2) and Cu(2)[bond]S(2) systems have been discussed by taking into account the difference in electron-donor ability of the pyridine nucleus between the Pym and Pye ligand systems.