V2O5 based quadruple nano‐perovskite as a new catalyst for the synthesis of bis and tetrakis heterocyclic compounds

In this article, we presented a novel, efficient and facile approach for using strontium titanate supported catalyst in organic synthesis. Bis and tetrakis of coumarin, indole and xanthene derivatives can effortlessly have prepared using V₂O₅/perovskite nanoparticles (NPs) under solvent‐free condition. V₂O₅/perovskite in (NPs) was prepared and identified using Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD) and scanning electron microscope supported with energy dispersive X‐ray (SEM/EDAX). Calculated crystal size was from the intense XRD peaks was found to range between 50–60 nm in agreement with that obtained from the transmission electron microscopic investigation. EDAX analysis and mapping images reveal a homogenous distribution of all constituents with their calculated ratios in the synthesized catalyst.     

A novel series of M(II) complexes of 6‐methylpyridine‐2‐carboxylic acid with 4(5)methylimidazole: Synthesis,crystal structures, α‐glucosidase activity,density functional theory calculations and molecular docking

Novel complexes of 6‐methylpyridine‐2‐carboxylic acid and 4(5)methylimidazole, namely [Mn(6‐mpa)₂(4(5)MeI)₂] ( 1 ), [Zn(6‐mpa)₂(4(5)MeI)₂] ( 2 ), [Cd(6‐mpa)₂(4(5)MeI)₂] ( 3 ), [Co(6‐mpa)₂(4(5)MeI)₂] ( 4 ), [Ni(6‐mpa)₂(4(5)MeI)(OAc)] ( 5 ) and [Cu(6‐mpa)₂(4(5)MeI)] ( 6 ), were synthesized for the first time. The structures of complexes 1 – 4 and complexes 5 and 6 were determined using X‐ray diffraction and mass spectrometric techniques, respectively. The experimental spectral analyses for these complexes were performed using Fourier transform infrared and UV–visible techniques. The α‐glucosidase inhibition activity values (IC₅₀) of complexes 1 – 6 were identified in view of genistein reference compound. Moreover, the DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level was used to obtain optimal molecular geometry and vibrational wavenumbers for complexes 1 – 6 . Electronic spectral behaviours and major contributions to the electronic transitions were investigated using TD‐DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level with conductor‐like polarizable continuum model and SWizard program. Finally, in order to investigate interactions between the synthesized complexes ( 1 – 6 ) and target protein (template structure S. cerevisiae isomaltase), a molecular docking study was carried out.     

A new dinuclear copper (II) complex of 2,5–Furandicarboxyclic acid with 4(5)‐Methylimidazole as a high potential α‐glucosidase inhibitor: Synthesis,Crystal structure,Cytotoxicity study,and TD/DFT calculations

A new dinuclear copper (II) complex of 2,5–furandicarboxyclic acid with 4(5)‐methylimidazole, [Cu (FDCA)((4(5)MeI)₂]₂·2H₂O, was synthesized, and its structure characterized by XRD, FT–IR and UV–Vis spectroscopic techniques. The α‐glucosidase inhibition and cytotoxicity study of the synthesized Cu (II) complex were determined by IC₅₀ values. The optimized geometry and vibrational harmonic frequencies for the Cu (II) complex were obtained by using Density Functional Theory (DFT) of HSEh1PBE/6–311++G(d,p)/LanL2DZ level. TD‐DFT/HSEh1PBE/6–311++G(d,p)/LanL2DZ level with CPCM model was applied to examine the electronic spectral properties and major contributions were determined via Swizard program. To investigate linear and nonlinear optical behavior of the synthesized Cu (II) complex, the α, Δα and χ⁽¹⁾/β, γ and χ⁽³⁾ parameters called linear/nonlinear optical parameters in gas phase and ethanol solvent were computed at the same level and basis set. Furthermore, molecular electrostatic potential (MEP) surface was determined by using the same level. The docking study of the Cu (II) complex to the binding site of the target protein (the template structure S. cerevisiae isomaltase) is fulfilled. Natural bond orbital (NBO) analysis was used to investigate the hyperconjugative interactions, inter‐ and intra‐molecular bonding and to determine coordination around Cu (II) ion. Finally, present work is the first remarkable scientific report of mixed‐ligand (H₂FDCA and 4(5)MeI) Cu (II) complex as novel drug candidate for DM II. It is also determined that microscopic third?NLO parameters for the Cu (II) complex is remarkable.     

Gold nanoparticle included graphene oxide modified electrode: Picomole detection of metal ions in seawater by stripping voltammetry

We obtained a gold nanomaterial/graphene oxide-modified glassy carbon electrode and characterized it using transmission electron microscope, scanning electron microscope, cyclic voltammetry (CV), and X-ray photoelectron spectroscopy techniques. A response of the electrode using square wave anodic stripping voltammetry for Pb²⁺, Cu²⁺, and Hg²⁺ was found linear in the range from 1 × 10^–7 to 1 × 10^–11 M. The detection limits of Pb²⁺, Cu²⁺ and Hg²⁺ were 0.14, 0.5 and 1.2 pM, respectively. The method was applied to the simultaneous determination of Pb²⁺, Cu²⁺ and Hg²⁺ in seawater samples from a coastal region of Anatolia, and the results corresponded well with the values obtained by inductively coupled plasma-optical emission spectroscopy.     

Synthesis of superparamagnetic and thermoresponsive hybrid nanoparticles via surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate

A reversible addition‐fragmentation chain transfer (RAFT) agent was directly anchored onto superparamagnetic Fe₃O₄ nanoparticles (SPNPs) in a simple procedure using a ligand exchange reaction of 2‐[(dodecylsulfanylcarbonylthiolsulfanyl) propionic acid] (DCPA) with oleic acid initially present on the surface of Fe₃O₄ nanoparticles. The DCPA‐modified SPNPs were then used for the surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate to fabricate structurally well‐defined hybrid SPNPs with temperature‐responsive poly[di(ethylene glycol) ethyl ether acrylate‐co‐(oligoethylene glycol) methyl ether acrylate] shell and magnetic Fe₃O₄ core. Evidence of a well‐controlled surface‐mediated RAFT polymerization was gained from a linear increase of number‐average molecular weight with overall monomer conversions and relatively narrow polydispersity indices of the copolymers grown from the SPNPs. The resultant hybrid nanoparticles exhibited superparamagnetic property with a saturation magnetization of 55.1–19.4 emu/g and showed a temperature‐responsive phenomenon as the temperature changed between 25 and 40 ^°C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3420–3428     

Reactivity of ionic liquids with kaolinite: melt intersalation of ethyl pyridinium chloride in an urea-kaolinite pre-intercalate

This paper reports a new route for the intercalation of an ionic liquid, namely 1-ethyl pyridinium chloride, into the interlamellar spaces of kaolinite. The intercalation was achieved using a kaolinite-urea intercalate as a starting material. The results of the XRD, FTIR, and TGA analyses confirmed the intercalation of ethyl pyridinium in the interlamellar spaces of kaolinite. 13C CP/MAS spectra indicated the complete displacement of urea by ethyl pyridinium. 29Si and 27Al NMR spectra of the starting materials and the products are also discussed as well as the results of the elemental analysis of the produced nanohybrid material.     

Torsional wave dispersion relations in a pre-stressed bi-material compounded cylinder with an imperfect interface

This paper studies the influence of the imperfectness of the contact condition on the torsional wave propagation in the initially stressed (stretched) bi-material compounded circular cylinder. The investigation is carried out within the scope of the piecewise homogeneous body model with the use of the Three-dimensional Linearized Theory of Elastic Waves in Initially Stresses Bodies. The mathematical formulation of the corresponding eigen-value problem is formulated and the solution method for that is developed. The two cases considered are the bi-material compounded cylinder consists of the solid inner and surrounding hollow outer cylinders (Case 1); the bi-material compounded cylinder consists of the hollow inner and surrounding hollow outer cylinders (Case 2). The mechanical relations of the cylinders’ materials are written through the Murnaghan potential. It is proven that the imperfectness of the contact condition does not influence the asymptotic-limit values of the wave propagation velocity. Moreover, the numerical results on the effects of the imperfectness of the boundary condition on the influence of the initial stresses on the wave propagation velocity are presented and discussed.     

Adsorptive stripping voltammetric determination of ofloxacin

The fluoroquinolone antibacterial agent ofloxacin was studied by adsorptive stripping voltammetry. Controlled interfecial accumulation of ofloxacin on a static mercury drop electrode in the hanging mercury drop mode provides high sensitivity. The linear concentration range was 0.079–197.5 μg ml^?1 when using a 60-s preconcentration at ?1 V vs. Ag/AgCl in Britton-Robinson buffer of pH 6.00. The detection limit of ofloxacin was 1 ng ml^?1. The precision is excellent with a relative standard deviation of ca. 0.75% at a concentration of 0.848 μg ml^?1.     

The Nano-threading of Polymers

When guest polymers are threaded by host cyclodextrins (CDs) to form crystalline inclusion compounds (ICs), the included polymer chains are highly extended and separated from neighboring chains. This is a consequence of the stacking of the cyclic oligosaccharides, α-, β-, or γ-CD containing 6, 7, or 8 glucose units, respectively, which produces continuous narrow channels (~0.5–1.0 nm diameters), where the guest polymers are included and confined. Observations that illuminate several important aspects of the nano-threading of polymers to form polymer-CD-ICs are described. These include (i) the competitive CD threading of polymers with different chemical structures and molecular weights from their solutions containing suspended solid or dissolved CDs, (ii) the threading and insertion of undiluted liquid polymers into solid CDs, and (iii) suspension of polymer A or B-CD-IC crystals in a solution of polymer B or A and observation of the transfer of polymer B or A from solution to displace polymer A or B and form polymer B or A-CD-ICs, without dissolution of the CD-ICs. In addition, we report observations of polyolefins adsorbed on zeolites, where we believe the adsorbed polyolefin chains are actually threaded and absorbed into the interiors of the zeolite nano-pores, rather than adsorbed on the zeolite surfaces. All of the above observations were made to assist in answering the question “Why do randomly-coiling polymer chains in solution or the melt become threaded or thread into the nano-pores of dissolved or solid CDs and solid zeolites, where they are highly extended and segregated from other polymer chains?” Though still not fully able to answer this question, we are able to assess the importance of several factors that have been previously suggested to be important in the formation of CD-ICs with both polymer and small-molecule guests and to the nano-threading of polymers in general. In particular, the value in observations of the inclusion of guest polymers, as well as small-molecule guests, into solid CDs suspended in their solutions and in neat guest liquids were made apparent, because interactions between host CDs, between CDs and solvents, and between quests and solvents, which complicate and make understanding the formation of polymer-CD-ICs difficult, are either eliminated or can be independently varied in these experiments.     

Parallel finite element computation of unsteady incompressible flows

A parallel semi-explicit iterative finite element computational procedure for modelling unsteady incompressible fluid flows is presented. During the procedure, element flux vectors are calculated in parallel and then assembled into global flux vectors. Equilibrium iterations which introduce some ‘local implicitness’ are performed at each time step. The number of equilibrium iterations is governed by an implicitness parameter. The present technique retains the advantages of purely explicit schemes, namely (i) the parallel speed-up is equal to the number of parallel processors if the small communication overhead associated with purely explicit schemes is ignored and (ii) the computation time as well as the core memory required is linearly proportional to the number of elements. The incompressibility condition is imposed by using the artificial compressibility technique. A pressure-averaging technique which allows the use of equal-order interpolations for both velocity and pressure, this simplifying the formulation, is employed. Using a standard Galerkin approximation, three benchmark steady and unsteady problems are solved to demonstrate the accuracy of the procedure. In all calculations the Reynolds number is less than 500. At these Reynolds numbers it was found that the physical dissipation is sufficient to stabilize the convective term with no need for additional upwind-type dissipation. © 1998 John Wiley & Sons, Ltd.