Electron ionization induced metastable decompositions of isomeric trimethylsilylmethanol, (CH3)3SiCH2OH, and methoxytrimethylsilane, (CH3)3SiOCH3

The metastable decompositions of trimethylsilylmethanol, (CH₃)₃SiCH₂OH (MW: 104, 1) and methoxytrimethylsilane, (CH₃)₃SiOCH₃ (MW: 104, 2) upon electron ionization have been investigated by use of mass-analyzed ion kinetic energy (MIKE) spectroscopy and D labeling. The metastable ions of 1 ^·+ decompose to give the fragment ions m/z 89 (CH ₃ ^· loss) and 73 (^·CH₂OH loss), whereas those of 2 ^·+ only yield the fragment ion m/z 89 (CH ₃ ^· loss). The latter fragment ion is generated by loss of a methyl radical from the trimethylsilyl group via a simple cleavage reaction as shown by D labeling. However, the fragment ions m/z 89 and 73 from 1 ^·+ are generated following an almost statistical exchange of the original methyl and methylene hydrogen atoms in the molecular ion as shown also by D labeling. This exchange indicates a complex rearrangement of the molecular ion of 1 ^·+ prior to metastable decomposition for which as key step a 1,2-trimethylsilyl group migration from carbon to oxygen is suggested. A different behavior is also found between the source-generated m/z 89 ions from 1 ^·+ which decompose in the metastable time region to give ions m/z 61 by loss of ethylene and those from 2 ^·+ which decompose in the metastable region to yield ions m/z 59 by elimination of formaldehyde.     

A flow-based enzyme-linked immunosorbent assay on a polydimethylsiloxane microchip for the rapid determination of immunoglobulin A

A flow-based enzyme-linked immunosorbent assay (ELISA) on a polydimethylsiloxane (PDMS) microchip has been developed for the rapid determination of immunoglobulin A (IgA). The analytical principle of this integrated method is the same as the conventional sandwich-type ELISA. A primary antibody (anti-IgA) was adsorbed on the surface of a PDMS microchannel, and then an antigen (IgA) and a secondary antibody (anti-IgA HRP labeled) were reacted successively. The resulting antigen-antibody complex, fixed on the surface of the microchannel, was detected using Amplex^® Red and a fluorescent imaging system. The calibration curve of the IgA standard solution was linear in the range of 0-50 ng/mL at the flow rate of 10 μL/min. This flow rate corresponds to the reaction time of 4.8 s. Compared to the conventional assay on a 96-well microtiter plate, the present assay on the microchip dramatically shortened the reaction time necessary for the enzyme-substrate reaction from 30 min to 4.8 s, i.e., to 1/375. The amounts of the reagent and sample were also reduced to 1/100 compared to the 96-well microtiter plate.     

Fully automated liquid chromatography-mass spectrometry determination of 17beta-estradiol in river water

Surface modified molecularly imprinted polymers (SM-MIPs) for 17beta-estradiol (E2), utilizing 6-ketoecradiol as a pseudo template were prepared. MIPs for E2 were synthesized using 4-vinyl pyridine and ethylene dimethacrylate as a functional monomer and cross-linking agent, respectively. MIPs selectively retained E2 and provided excellent chromatographic resolution from interfering compounds inherent in river water sample matrices. Therefore, freshly prepared MIPs were applied to quantitative mass spectrometric (negative electrospray ionization mode) detection of low levels of E2 in river water sample. In order to pre-concentrate the target compound for HPLC analysis, column switching was coupled with a pretreatment column packed with the MIPs. The repeatability of actual determinations of river water sample, in which background E2 was not detected, spiked with 50 ng/L of E2 was 2.2% RSD with a detection limit and qualification limit of 1.8 and 5.4 ng/L, respectively. Surface modification of MIP particlefs packed in the pretreatment column provided selective affinity and on-line concentration of low levels of E2 while simultaneously eliminating sample matrix interference, resulting in a significant increase in sensitivity and reproducibility for liquid chromatography-mass spectrometry analysis of E2 in river water sample.     

Application of hydride generation to the determination of trace concentrations of arsenic by inductively-coupled plasma atomic emission spectrometry

A method is described for the determination of traces of arsenic, based on sodium tetrahydroborate reduction of arsenic and introduction of the arsine formed to a relatively low-powered (1.6 kW) inductively-coupled plasma where the arsenic atomic emission is generated, Inter-element interference effects are described; many can be eliminated by addition of potassium iodide to the sample solutions, but the standard additions method is recommended for accurate arsenic determination. Potassium iodide is also used for prereducing arsenic(V) to arsenic(III). The method has a detection limit of 0.1 ng As ml^-1 and the linear calibration range spans nearly four orders of magnitude. The proposed method is applied to the determination of ng ml^-1 levels of arsenic in waste waters.     

Combinatorial synthesis of MUC1 glycopeptides: polymer blotting facilitates chemical and enzymatic synthesis of highly complicated mucin glycopeptides

The chemoselective polymer blotting method allows for rapid and efficient synthesis of glycopeptides based on a "catch and release" strategy between solid-phase and water-soluble polymer supports. We have developed a heterobifunctional linker sensitive to glutamic acid specific protease (BLase). The general procedure consists of five steps, namely (i) the solid-phase synthesis of glycopeptide containing BLase sensitive linker, (ii) subsequent deprotections and the release of the glycopeptide from the resin, (iii) chemoselective blotting of the glycopeptide intermediates in the presence of water-soluble polymers with oxylamino functional groups, (iv) sugar elongations using glycosyltransferases, and (v) the release of target glycopeptides from the polymer platform by selective BLase promoted hydrolysis. The combined use of the solid-phase chemical syntheses of peptides and the enzymatic syntheses of carbohydrates on water-soluble polymers would greatly contribute to the production of complicated glycopeptide libraries, thereby enhancing applicative research. We report here a high-throughput synthetic system for the various types of MUC1 glycopeptides exhibiting a variety of sugar moieties. It is our belief that this concept will become part of the entrenched repertoire for the synthesis of biologically important glycopeptides on the basis of glycosyltransferase reactions in automated and combinatorial syntheses.     

Specifications of a neutron exposure accelerator system for biological effects experiments (NASBEE) in NIRS

We developed a neutron irradiation facility, neutron exposure accelerator system for biological effect experiments (NASBEE) for biological studies in National Institute of Radiological Sciences, Japan. Irradiation field of 2 MeV average neutrons generated by a Be(d–n)B reaction is established. Dose uniformity of 240 mm in diameter irradiation field is producible within ±2.5% with a dose rate of 0.87 Gy/h at sample target distance of 1170 mm. Two irradiation rooms, a specific pathogen-free (SPF) conditioned one and a conventional, are now available. Irradiation protocols for in vitro experiments are now established and demonstrated by obtaining a relative biological effectiveness (RBE) of cell inactivation measured to be 3.54 with 10% survival dose (D₁₀).     

Evolved gas analysis of Ti(C5H5)2Cl2 by means of Li+ ion attachment mass spectrometry

Characterization of the compound Ti(C(5)H(5))(2)Cl(2) was studied using Li(+) ion attachment mass spectrometry (IAMS) as an analytical methodology. Since this target compound is used as an anticancer drug in the treatment of leukemia, accurate and rapid monitoring methods for the determination of titanium drugs in a hospital environment are desirable. A quadrupole mass spectrometry system along with a Li(+) ion attachment technique and a direct inlet probe (DIP) produced the Li(+) adduct of Ti(C(5)H(5))(2)Cl(2), Ti(C(5)H(5))(2)Cl(2)Li(+). The DIP also was used to study the temperature-resolved behavior of this compound. The slope of the plot of signal intensity of Ti(C(5)H(5))(2)Cl(2)Li(+) versus temperature for Ti(C(5)H(5))(2)Cl(2) sublimation from 60 to 100 °C was used to determine an apparent activation energy (E(a)) of 124.43 kJ/mol for the sublimation of Ti(C(5)H(5))(2)Cl(2). This value is comparable to the reported value of 118.8 kJ/mol for molar enthalpy of sublimation of Ti(C(5)H(5))(2)Cl(2). These results demonstrate that the IAMS methodology can be used to study the enthalpy of sublimation for d-metal complex materials.     

Ring‐Opening Reactions of 3‐Aryl‐1‐benzylaziridine‐2‐carboxylates and Application to the Asymmetric Synthesis of an Amphetamine‐Type Compound

Nucleophilic ring‐opening reactions of 3‐aryl‐1‐benzylaziridine‐2‐carboxylates were examined by using O‐nucleophiles and aromatic C‐nucleophiles. The stereospecificity was found to depend on substrates and conditions used. Configuration inversion at C(3) was observed with O‐nucleophiles as a major reaction path in the ring‐opening reactions of aziridines carrying an electron‐poor aromatic moiety, whereas mixtures containing preferentially the syn‐diastereoisomer were generally obtained when electron‐rich aziridines were used (Tables 1–3). In the reactions of electron‐rich aziridines with C‐nucleophiles, S_N2 reactions yielding anti‐type products were observed (Table 4). Reductive ring‐opening reaction by catalytic hydrogenation of (+)‐trans‐(2S,3R)‐3‐(1,3‐benzodioxol‐5‐yl)aziridine‐2‐carboxylate (+)‐trans‐ 3c afforded the corresponding α‐amino acid derivative, which was smoothly transformed into (+)‐tert‐butyl [(1R)‐2‐(1,3‐benzodioxol‐5‐yl)‐1‐methylethyl]carbamate((+)‐ 14 ) with high retention of optical purity (Scheme 6).