Surface friction of thermoresponsive poly(N-isopropylacrylamide) gels in water

In this paper, we report the experimental results of surface friction between thermoresponsive poly(N-isopropylacrylamide) gels in water. The static friction force was found to depend on the waiting period prior to slider movement after contact between gel surfaces, which was a result of two relaxation mechanisms: the stress decay process due to macroscopic deformation under a normal load and the microscopic conformational change in the real contact area of polymer networks. The sliding velocity and the normal load dependence of the kinetic friction force were extensively measured. The results suggested that the following two mechanisms depended on the sliding velocity: the friction force generated by direct contact of the solid-like behavior and the viscous resistance of the liquid-like behavior. The strong temperature dependence of kinetic friction was observed, which was a result of a change in the balance between hydrophobic and hydrophilic interactions. The experimental results are discussed in terms of the multi-asperity contacts between the swollen gel/gel interfaces (solid friction, depending on the waiting period) and the viscous resistance and lubricating effect between the gel/water interfaces (fluid friction, depending on the sliding velocity).     

Water/ionic liquid interfaces as fluid scaffolds for the two-dimensional self-assembly of charged nanospheres

Liquid-liquid interfaces formed between water and ionic liquids serve as fluid scaffolds to self-assemble anionic nanospheres two-dimensionally. When aqueous dispersions of anionic fluorescent polystyrene nanospheres (diameter ～500 nm) are layered on ionic liquids, ordered monolayers are spontaneously formed at the interface. Fluorescent nanospheres are hexagonally packed in the interfacial monolayers, as observed by confocal laser scanning microscopy (CLSM). The adsorption and alignment of nanospheres at the interface are affected by the ionic strength and pH of the aqueous phase, indicating electrostatic interaction as the primary driving force for the self-assembly. CLSM observation of the water/ionic liquid interface reveals that the lower hemisphere of nanospheres is exposed to the ionic liquid phase, which effectively alleviates lateral electrostatic repulsion between charged nanospheres and promotes their close packing. The densely packed monolayer structure of nanospheres is stably immobilized on the surface of CLSM glass dishes simply by rinsing the ionic liquid layer with pure water, probably as a consequence of the gluing effect exerted by imidazolium cations. The fluidic nature of the water/ionic liquid interface facilitates the diffusion and ordering of nanospheres into a hexagonal lattice, and these features render the interface promising soft scaffolds to self-assemble anionic nanomaterials two-dimensionally.     

Role of lipid rafts in innate immunity and phagocytosis of polystyrene latex microspheres

Understanding of the association of phagocytosis of polymers with signaling of innate immunity of macrophages is the major purpose of this study. Polymer conjugates have been utilized for clinical therapy of cancer and infections, such as Mycobacterium tuberculosis, as effective vectors of drug-delivery systems. They are incorporated through phagocytosis into macrophages and activate innate immunity signaling, which plays a crucial role in its therapeutic and side effects. Macrophage phagocytosis of polystyrene latex microspheres was examined and assayed by treatment of macrophages with the cholesterol depletor methyl-β-cyclodextrin (MβCD) or the sphingolipid depletor n-octyl-β-D-glucopyranoside (OGP). Expressions of various mRNAs during phagocytosis were quantified by real-time PCR. Phagocytosis of polystyrene latex microspheres by various macrophages, such as murine monocyte-derived macrophage J774, rat alveolar macrophage NR8383, and murine Kupffer cell KC13-2, was suppressed by treatment with MβCD or OGP in a concentration-dependent manner. The expression of mRNAs of TNFα, IL-1β, IL-6 and CXCL10 genes induced by lipopolysaccharide (LPS) was not suppressed by treatment with MβCD in J774 cells. Moreover, genes that were induced by LPS were up-regulated even in the absence of LPS by the phagocytosis of polymer conjugates, but such up-regulations were not suppressed by the treatment with MβCD. It was shown that lipid rafts play a significant role in incorporation of polymer conjugates through phagocytosis of macrophages, but their association with signal transduction in innate immunity is very limited.     

Preparation of Hemispherical Polymer Particles by Cleavage of a Janus Poly(methyl Methacrylate) /Polystyrene Composite Particle

Micrometer-sized, hemispherical particles were successfully prepared as a result of the cleavage of Janus PMMA/PS composite particles by dispersion into acetone/water (9/1-10/0 v/v) media or a THF/water (8/2 v/v) medium. The spherical composite particles having a Janus structure were prepared by the slow evaporation of toluene from homogeneous PMMA/PS/toluene droplets dispersed in an aqueous medium in advance. It was clarified that the difference in affinity between PMMA and PS phases with respect to the media caused the cleavage of the composite particles. This method is expected to be a novel approach to the preparation of nonspherical polymer particles.     

Fabrication of Transparent,Tough, and Conductive Shape‐Memory Polyurethane Films by Incorporating a Small Amount of High‐Quality Graphene

We report a mechanically strong, electrically and thermally conductive, and optically transparent shape‐memory polyurethane composite which was fabricated by introducing a small amount (0.1 wt%) of high‐quality graphene as a filler. Geometrically large (≈4.6 μm²), but highly crystallized few‐layer graphenes, verified by Raman spectroscopy and transmission electron microscopy, were prepared by the sonication of expandable graphite in an organic solvent. Oxygen‐ containing functional groups at the edge plane of graphene were crucial for an effective stress transfer from the graphene to polyurethane. Homogeneously dispersed few‐layered graphene enabled polyurethane to have a high shape recovery force of 1.8 MPa cm⁻³. Graphene, which is intrinsically stretchable up to 10%, will enable high‐performance composites to be fabricated at relatively low cost and we thus envisage that such composites may replace carbon nanotubes for various applications in the near future.     

A GW+Bethe-Salpeter calculation on photoabsorption spectra of (CdSe)3 and (CdSe)6 clusters

Photoabsorption spectra are calculated for the magic number clusters, (CdSe)(3) and (CdSe)(6), using an all-electron mixed basis GW scheme with the excitonic effect incorporated by solving the Bethe-Salpeter equation (BSE). The GW+BSE calculation provided clear size dependence of the optical gap as expected, while magnitude of the gap is overestimated compared to available experimental one. The gap is found very similarly overestimated when using the local density approximation (LDA) within the density functional theory because accidental error cancellation occurs between the significantly underestimated LDA gap and the excitonic effect neglected therein. The excitonic states are described by superposition of many one-particle states that would not be properly described within a one-particle theory, as clearly visualized in the plot of the exciton wavefunctions.     

Preparation of organic/inorganic hybrid and hollow particles by catalytic deposition of silica onto core/shell heterocoagulates modified with poly[2-(N,N-dimethylamino)ethyl methacrylate

The organic/inorganic hybrid particles PSt/P(St-CPEM)(θ)-g-PDMAEMA/SiO(2) were prepared by catalytic hydrolysis and subsequent polycondensation of tetraethoxysilane in the poly[2-(N,N-dimethylamino)ethyl methacrylate] (PDMAEMA) layers grafted on the PSt/P(St-CPEM)(θ) core/shell heterocoagulates. The micron-sized PSt core and the submicron-sized P(St-CPEM) shell particles bearing ATRP initiating groups were synthesized by dispersion polymerization of styrene (St) and emulsifier-free emulsion polymerization of St with 2-chloropropionyloxyethyl methacrylate (CPEM), respectively. The raspberry-shaped PSt/P(St-CPEM)(θ) heterocoagulates with a controlled surface coverage (θ=0.51, 0.81) were prepared by hydrophobic coagulation between the core and the shell particles in an aqueous NaCl solution near the T(g) of P(St-CPEM). Surface modification of heterocoagulates was carried out by ATRP of DMAEMA from the shell particles adsorbed on the core particles. Silica deposition was performed by simply adding tetraethoxysilane to a water/methanol dispersion of PSt/P(St-CPEM)(θ)-g-PDMAEMA. The SEM and TGA revealed that the resulting PSt/P(St-CPEM)(θ)-g-PDMAEMA/SiO(2) composites maintain a raspberry-like morphology after deposition of silica onto the PDMAEMA layer grafted on heterocoagulates. The micron-sized, raspberry-shaped or the submicron-sized, hole-structured silica hollow particles were obtained selectively by thermal decomposition of the PSt/P(St-CPEM)(θ)-g-PDMAEMA/SiO(2). The oriented particle array was fabricated by dropping anisotropically perforated silica particles onto a glass substrate settled at the bottom of a bottle filled with chloroform.     

A high voltage organic-inorganic hybrid photovoltaic cell sensitized with metal-ligand interfacial complexes

A thin solid-state photovoltaic cell of organic-inorganic hetero junctions was fabricated by forming a dye-metal charge-transfer complex as the sensitizer monolayer at the interface of crystalline state organic and inorganic semiconductors. The organic-inorganic hybrid thin-film photocell generates a high photovoltage of 1.2 V, yielding an energy conversion efficiency of up to 1.5%.     

Photodegradation of lipopolysaccharides and the inhibition of macrophage activation by anthraquinone-boronic acid hybrids

Target-selective photodegradation of 3-deoxy-D-manno-2-octulopyranosonic acid (KDO) was achieved without additives and under neutral conditions using a designed anthraquinone-boronic acid hybrid and long wavelength UV light irradiation. The hybrid can photodegrade lipopolysaccharides (LPS) and inhibit macrophage activation induced by LPS.     

Enantio- and diastereoselective hetero-Diels-Alder reactions between 2-aza-3-silyloxy-1,3-butadienes and aldehydes catalyzed by chiral dirhodium(II) carboxamidates

The first catalytic asymmetric hetero-Diels-Alder reaction between 2-aza-3-silyloxy-1,3-butadienes and aldehydes is described. With dirhodium(II) tetrakis[N-benzene-fused-phthaloyl-(S)-piperidinonate], Rh(2)(S-BPTPI)(4), the cycloaddition reaction proceeded exclusively in an endo mode to give all-cis-substituted 1,3-oxazinan-4-ones in high yields with up to 98% ee.