Heat of immersion of iron(III) oxides in water at 25°C

The heat of immersion in water was measured at 25°C for three iron(III) oxides using a twin-type microcalorimeter. One of the samples was commercial α-Fe₂O₃ (sample C) and the other two (samples M and F) were prepared by calcining magnetite and iron(III) hydroxide in air at various temperatures, T_p, from 300 to 700°C. The samples were evacuated at outgassing temperature, T_o, between room temperature and 500°C at a pressure of 1 × 10^?2?2.7 × 10^?2N m^?2 for 6 h. The heat of immersion, h_i(J m^?2), of samples C and M increased with an increase in T_o and showed the maximum h_i at T_o =400°C, while sample F did not show the maximum up to T_o =500°C. The systematic correlation was not observed between h_i and T_p of sample F. The heat of reproduction of the surface hydroxyl group on sample F was approximately estimated as 6.6 × 10⁴ J mole^?1 H₂O.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

Concomitant increase in putrescine incorporation with transferrin uptake into rat reticulocytes.

Concomitant increase in putrescine incorporation with transferrin uptake into rat reticulocytes was found. [14C]Putrescine incorporation occurred in the presence of transferrin at 37 degrees C. The subcellular distribution of incorporated [14C]putrescine showed that the incorporation in the plasma membrane time dependently increased. Both 125I-labeled transferrin uptake and [14C]putrescine incorporation decreased when ethylene glycol bis(2-aminoethyl ether)-N,N,N',N'-tetraacetic acid was added, while it increased with the addition of A23187.     

Photochemische Reaktionen. 121. Mitteilung. Zur Photochemie von ε,ζ-Methano-α,γ-dienonen und 7,8-Methano-1,3,5-trienen

Photochemistry of ε,ζ-Methano-α,γ-dienones and 7,8-Methano-1,3,5-trienes Irradiation of the δ-cyclopropyl-dienone (E)- 6 (λ ≥ 347 nm) gives (Z)- 6, 10 (1,5-sigmatropic H-shift), (E/Z)- 9 (electrocyclic process involving C(ε), C(ζ)-cleavage) and 11 (ring opening). The corresponding 6-cyclopropyl-triene (E)- 7 gives on singlet excitation (δ > 280 nm) 14 (1,5-sigmatropic H-shift) and, to a smaller extent, the bicyclo [3.2.0] heptenyl-dienes (E/Z)- 13 . However, on triplet excitation (λ ≥ 347 nm, benzophenone) (E)- 7 gives (E/Z)- 13 as the main products. On both ¹π,π*- and ³π,π*-excitation, (Z)- 7 and 15 are formed in small amounts.     

Ring‐Opening Reactions of 3‐Aryl‐1‐benzylaziridine‐2‐carboxylates and Application to the Asymmetric Synthesis of an Amphetamine‐Type Compound

Nucleophilic ring‐opening reactions of 3‐aryl‐1‐benzylaziridine‐2‐carboxylates were examined by using O‐nucleophiles and aromatic C‐nucleophiles. The stereospecificity was found to depend on substrates and conditions used. Configuration inversion at C(3) was observed with O‐nucleophiles as a major reaction path in the ring‐opening reactions of aziridines carrying an electron‐poor aromatic moiety, whereas mixtures containing preferentially the syn‐diastereoisomer were generally obtained when electron‐rich aziridines were used (Tables 1–3). In the reactions of electron‐rich aziridines with C‐nucleophiles, S_N2 reactions yielding anti‐type products were observed (Table 4). Reductive ring‐opening reaction by catalytic hydrogenation of (+)‐trans‐(2S,3R)‐3‐(1,3‐benzodioxol‐5‐yl)aziridine‐2‐carboxylate (+)‐trans‐ 3c afforded the corresponding α‐amino acid derivative, which was smoothly transformed into (+)‐tert‐butyl [(1R)‐2‐(1,3‐benzodioxol‐5‐yl)‐1‐methylethyl]carbamate((+)‐ 14 ) with high retention of optical purity (Scheme 6).     

Detection of ethanol in human body fluids by headspace solid-phase micro extraction (SPME)/capillary gas chromatography

Summary Ethanol has been found extractable from human whole blood and urine samples by headspace solid-phase micro extraction (SPME) with a Carbowax/divinylbenzene-coated fiber. After heating a vial containing the body fluid sample with ethanol, and isobutanol as internal standard (IS) at 70°C in the presence of (NH₄)₂SO₄, a Carbowax/divinylbenzene-coated SPME fiber was exposed in the headspace of the vial to allow adsorption of the compounds. The fiber needle was then injected into a middle-bore capillary gas chromatography (GC) port. The headspace SPME-GC gave intense peaks for both compounds; a small amount of background noises appeared, but did not interfere with the detection of the compounds. Recoveries of ethanol and IS were 0.049 and 0.026% for whole blood, respectively, and 0.054 and 0.085% for urine, respectively. The calibration curves for ethanol showed excellent linearity in the range of 80–5000 mg L^–1 for whole blood and 40–5000 mg L^–1 for urine; the detection limits for both samples were 20 and 10 mg L^–1, respectively. The data on actual determination of ethanol after the drinking of beer are also presented for two subjects.     

Model complexes for metallated polythiophenes: gold(I) and palladium(II) complexes of bis(diphenylphosphino)oligothiophenes

The preparations of two new phosphinothiophene ligands, 3,3'-bis(diphenylphosphino)-2,2'-bithiophene (dppbt; 1) and 3,3' "-dihexyl-3',3' '-bis(diphenylphosphino)-2,5':2',2' ':5' ',2' "-quaterthiophene (hdppqt; 2) are reported. Oxidation of 1 gives 3,3'-bis(diphenylphosphine oxide)-2,2'-bithiophene (3), and the crystal structure of this compound was determined. Pd(II) and Au(I) complexes of these ligands have been synthesized and characterized. Crystal structures of [(dppbt)PdCl(2)] (1-Pd), [(hdppqt)PdCl(2)] (2-Pd), [(dppbt)(AuCl)(2)] (1-Au), and [(hdppqt)(AuCl)(2)] (2-Au) were obtained. [(dppbt)(AuCl)(2)] crystallized in two solid-state forms; crystals grown from CH(2)Cl(2)/Et(2)O show a gold-gold interaction of 3.3221(4) A, but from CH(2)Cl(2)/toluene, the molecule crystallizes as a toluene adduct (1-Au-tol) and does not show any gold-gold interaction. All the complexes were characterized via UV-vis spectroscopy and cyclic voltammetry, and the effect of the metal on the energy of the pi-pi transition and oxidation potential was determined. These data are correlated to the interannular torsion angles in the oligothienyl groups from the crystal structure studies.     

Preparation of porous clay minerals with organic-inorganic hybrid pillars using solvent-extraction route

A microporous clay mineral with organic-inorganic hybrid pillars was synthesized using a hydrochloric acid (HCl)/ethanol extraction method after intercalation of tetraethoxysilane (TEOS) or TEOS/methyltriethoxysilane (MTS) into the cetyltrimetylammonium ion (CTA)-exchanged vermiculite. The products retained their layered structure, due to the formation of stable pillars by the polymerization of hydrolyzed TEOS and MTS during the HCl/ethanol treatment. The BET surface areas, which increased to above 500 m2g(-1) with an increase in the HCl concentration up to 0.4 moldm(-3), are nearly equal to that of the calcined product obtained by the conventional method. However, the pore sizes of HCl/ethanol-treated materials were narrower than those of the calcined product, owing to the formation of the polysiloxane networks in the gallery. A water adsorption study showed that the product treated with a TEOS/MTS mixture had a hydrophobic surface as a result of the successful incorporation of methyl groups at the surface of the pillars. This novel method is advantageous for the synthesis of organophilic pillared clays with different kinds of organic materials in the interlayers.