Nanoscopic Porous Iridium/Iridium Dioxide Superstructures (15 nm): Synthesis and Thermal Conversion by In Situ Transmission Electron Microscopy

Porous particle superstructures of about 15 nm diameter, consisting of ultrasmall nanoparticles of iridium and iridium dioxide, are prepared through the reduction of sodium hexachloridoiridate(+IV) with sodium citrate/sodium borohydride in water. The water-dispersible porous particles contain about 20 wt % poly(N-vinylpyrrolidone) (PVP), which was added for colloidal stabilization. High-resolution transmission electron microscopy confirms the presence of both iridium and iridium dioxide primary particles (1–2 nm) in each porous superstructure. The internal porosity (≈58 vol%) is demonstrated by electron tomography. In situ transmission electron microscopy up to 1000 °C under oxygen, nitrogen, argon/hydrogen (all at 1 bar), and vacuum shows that the porous particles undergo sintering and subsequent compaction upon heating, a process that starts at around 250 °C and is completed at around 800 °C. Finally, well-crystalline iridium dioxide is obtained under all four environments. The catalytic activity of the as-prepared porous superstructures in electrochemical water splitting (oxygen evolution reaction; OER) is reduced considerably upon heating owing to sintering of the pores and loss of internal surface area.     

Chiral distortion in a Mn(IV)(salen)(N3)2 derived from Jacobsen's catalyst as a possible conformation model for its enantioselective reactions

The Mn (IV)(salen)(N 3) 2 complex ( 3) from Jacobsen's catalyst is synthesized, and the X-ray crystal structures of 3 as well as the starting Mn (III)(salen)(N 3)(CH 3OH) complex ( 2) are determined in order to investigate the conformation of the high-valent Mn (IV)(salen) molecule in comparison with that of Mn (III)(salen). The asymmetric unit of the crystal of 3 contains four complexes, all of which adopt a nonplanar stepped conformation effectively distorted by the chirality of the diimine bridge. The asymmetric unit of 2 also contains four complexes. Two of them show a stepped conformation of a lesser degree, but the other two adopt a bowl-shaped conformation. Comparison of the structural parameters shows that the Mn center in 3 is coordinated from both sides by two external axial N 3 ligands with significantly shorter bond lengths, which could induce greater preference for the stepped conformation in 3. The CH 3CN solution of 3 shows circular dichroism with a significantly strong band at 275 nm as compared to 2, suggesting that 3 may adopt a more chirally distorted conformation also in solution. The circular dichroism spectrum of 3 is slightly altered with isodichroic points from 298 to 253 K and shows no further change at temperatures lower than 253 K, suggesting that the solution of 3 contains an equilibrium between two conformers, where a low-energy conformer with more chiral distortion is predominantly favored even at room temperature. Complexes 2 and 3 are thoroughly characterized using various techniques including cyclic voltammetry, magnetic susceptibility, UV-vis, electron paramagnetic resonance, (1)H NMR, infrared spectroscopy, and electrospray ionization mass spectrometry.     

The rotational spectrum of the NiS radical in the X3Sigma- state

The rotational spectrum of the NiS radical in the X(3)Sigma(-) state was observed by employing a source-modulation microwave spectrometer. The NiS radical was generated in a free space cell by a dc glow discharge in H(2)S diluted with Ar. The nickel atoms were supplied by the sputtering reaction from a nickel cathode. Rotational transitions with J = 11-10 to 25-24 were measured in the region between 135 and 314 GHz. Rotational, centrifugal distortion and several fine-structure constants were determined by a least-squares analysis. Other spectroscopic parameters such as dissociation energy, vibrational wavenumber and equilibrium bond length were also derived from the determined molecular constants. Excitation energies of the lowest (3)Pi and (1)Sigma(+) states were estimated from the fine-structure constants, lambda and gamma.     

Diastereoselective addition of allyltitanocenes to cyclic enones

The reaction of allyltitanocenes with five- to seven-membered cyclic enones proceeded with good to high diastereoselectivity depending on the ring size of enones. The stereochemistry of the major isomers produced by the reaction of cinnamyltitanocene was opposite to that of crotyltitanocene.     

Biosynthetic pathway for high structural diversity of a common dilactone core in antimycin production

We herein report comparative analysis of two versions of the biosynthetic gene clusters of antimycins, a natural product family possessing up to 44 distinct entities. The biosynthetic pathway of antimycins is amenable to the high structural variation of the substrates, supported by successes in heterologous expression of the ant cluster and in fluorine incorporation. The latter facilitated the investigation of the structure-activity relationship into the usually invariable 3-formamidosalicylic acid moiety of the molecules.     

Synthesis and micromechanical properties of flexible, self-supporting polymer-SiO2 nanofilms

Large-scale, self-supporting ultrathin films composed of an elastomeric polyacrylate network interpenetrated by a silica (SiO2) network were synthesized and characterized. The organic network was first photopolymerized and the silica structure was subsequently developed in situ in the preformed organic gel. Composition and morphology of the hybrid interpenetrated network (IPN) nanofilms were characterized by infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy and compared with the case of zirconia (ZrO2) hybrid IPN reported earlier. Young modulus, ultimate tensile strength, and ultimate tensile elongation were determined for different organic/inorganic molar ratios and give some insights on how the composition of the nanofilms influence their robustness and self-supporting properties.     

Fabrication of carbon nanofiber by pyrolysis of freeze-dried cellulose nanofiber

The possibility of fabricating carbon nanofibers from cellulose nanofibers was investigated. Cellulose nanofiber of ~50 nm in diameter was produced using ball milling in an eco-friendly manner. The effect of the drying techniques of cellulose nanofibers on the morphology of carbon residue was studied. After pyrolysis of freeze-dried cellulose nanofibers below 600 °C, amorphous carbon fibers of ~20 nm in diameter were obtained. The pyrolysis of oven-dried precursors resulted in the loss of original fibrous structures. The different results arising from the two drying techniques are attributed to the difference in the spatial distance between cellulose nanofiber precursors.     

Inversion of Optical Activity in the Synthesis of Mercury Sulfide Nanoparticles: Role of Ligand Coordination

Optical activity in inorganic colloidal materials was controlled through interactions of chiral molecules with the nanoparticle (NP) surface. An inversion of optical activity in the synthesis of mercury sulfide (HgS) NPs was demonstrated with an intrinsically chiral crystalline system in the presence of an identical chiral capping ligand. A continuous decrease in the positive first Cotton effect and an eventual reversal of CD profile were observed upon heating the aqueous solution of HgS NPs capped with N‐acetyl‐l ‐cysteine (Ac‐l ‐Cys) at 80 °C. Ac‐l ‐Cys afforded two bidentate coordination configurations with an almost mirror image of each other using the thiolate and either of carboxylate or acetyl–carbonyl groups on the HgS core. Experiment and calculation suggest that a shift in the distribution of the NP formation with energy in response to the combinations of ligand coordination structure and chiral crystalline surface is responsible for the inversion of optical activity.