Influence of Cu electroplating solutions on boron carbon nitride (BCN) film

Cu electroplating is required for the fabrication of Cu/low-k interconnections. The permeation of a plating solution into low-k films during Cu electroplating is a serious challenge for 45-nm nodes and more complex devices. We investigated the influence of Cu electroplating solutions on boron carbon nitride (BCN) as a low-k film. After dipping it into a Cu electroplating solution that contained additives, the BCN film's hydrophilic surface changed to a hydrophobic surface, and the incorporation of water into the BCN film was suppressed by surfactant adsorption. Sulfuric residue was detected on the BCN sample by thermal desorption spectroscopy after treatment in the Cu electroplating solution with additives; however, it was found through electrical measurements that this solution did not affect the leakage current or the dielectric constant of the BCN film. We successfully fabricated an electroplating Cu layer on a BCN film with good adhesion, and we believe that this BCN film is a sufficiently useful material for Cu/BCN integration in LSI.     

Separation of isomeric 2-aminopyridine derivatized N-glycans and N-glycopeptides of human serum immunoglobulin G by using a zwitterionic type of hydrophilic-interaction chromatography

Isomeric oligosaccharides and isomeric glycopeptides are sometimes difficult to separate on normal-phase (NP) and reversed-phase (RP) columns. A zwitterionic type of hydrophilic-interaction chromatography column with sulfobetaine groups (called ZIC-HILIC column) was first applied to the separation of 2-aminopyridine derivatized (PA) N-glycans and tryptic peptides of human serum immunoglobulin G (IgG). It is shown that the ZIC-HILIC column has high capability for structural recognition of isomeric N-glycans as well as high selectivity for glycopeptides. The former feature (i.e., structural recognition) was proven by sufficient separation of neutral PA N-glycan isomers, which are usually difficult to separate on NP and RP columns. In addition, it is noteworthy that IgG glycopeptides consisting of isomeric N-glycans and the same peptide sequences can be sufficiently separated on a ZIC-HILIC column. The latter feature (i.e., selectivity) was also demonstrated by easily separating two peptide groups with/without N-glycans. Thus, we note that the ZIC-HILIC column is highly promising for a simple analysis of N-glycans and N-glycopeptide samples.     

A reduction-triggered delivery by a liposomal carrier possessing membrane-permeable ligands and a detachable coating

To control the cellular uptake of drugs and genes, we synthesized a liposomal carrier possessing membrane-permeable ligands and a detachable poly(ethylene glycol) (PEG) coating. For the detachable coating, a lipid having a thiolytic cleavable spacer (PEG-S-S-DOPE) was synthesized by the reaction of dioleoylphosphatidylethanolamine (DOPE) with a PEG chain via a disulfide linkage. The liposomes were prepared from a mixture of dipalmitoylphosphatidylcholine (DPPC), DOPE, PEG-S-S-DOPE, and cholesteryl hemisuccinate (CHEMS). The octamer (R8 peptide) of arginine was chosen as the membrane-permeable ligand and covalently immobilized onto the CHEMS portion of the liposome surface (PEG-S-S-R8-liposome). The disulfide bond of the PEG chain was cleaved to display the R8 peptides on the liposome surface by adding a reducing agent such as L-cysteine, and thereby internalization of the liposomes was significantly facilitated. When L-cysteine was added to the mixture of cells and the liposome that incorporated plasmids encoding the enhanced green fluorescence protein (pEGFP), the expression of EGFP was low but could be observed in almost 100% of the cells.     

Probing anisotropic interaction potentials of unsaturated hydrocarbons with He*(2 3S) metastable atom: attractive-site preference of sigma-direction in C2H2 and pi-direction in C2H4

State-resolved collision energy dependence of Penning ionization cross sections of acetylene (C2H2) and ethylene (C2H4) with He*(2 3S) metastable atoms was observed in a wide collision energy range from 20 to 350 meV. A recently developed discharge nozzle source with a liquid N2 circulator was employed for the measurements in the low-energy range from 20 to 80 meV. Based on classical trajectory calculations for the energy dependence of the partial ionization cross sections, anisotropic potential energy surfaces for the present systems were obtained by optimizing ab initio model potentials for the chemically related systems Li+C2H2 and C2H4. In the case of C2H2, the global minimum was found to be located around the H atom along the molecular axis with a well depth of 48 meV (ca. 1.1 kcal/mol). On the other hand, a dominant attractive well with a depth of 62 meV (ca. 1.4 kcal/mol) was found in the piCC electron region of C2H4. These findings were discussed in connection with orbital interactions between molecular orbitals of the target molecules and atomic orbitals of the metastable atom. It is concluded that sigma-type unoccupied molecular orbitals of C2H2 and a piCC-type highest occupied molecular orbital of C2H4 play a significant role for the attractive-site preference of sigma direction in C2H2 and pi direction in C2H4, respectively.     

BiScO3: centrosymmetric BiMnO3-type oxide

With neutron powder diffraction, electron diffraction, and second-harmonic generation, we have shown that BiScO3 has a structure closely related to that of multiferroic BiMnO3, but BiScO3 crystallizes in the centrosymmetric space group of C2/c. These results bring up a question about the origin of ferroelectricity in BiMnO3. BiScO3 may serve as a model system to understand the role of Mn3+ ions in the ferroelectricity of BiMnO3.     

Simultaneous genotyping of indels and SNPs by mass spectroscopy

Nucleotide insertion/deletion polymorphisms (indels) in ApoE gene were precisely genotyped using artificial ribonucleases and MALDI-TOF MS. The RNA fragments for MS analysis were prepared by treating RNA specimens with our artificial ribonucleases, which consist of LuCl(3) (molecular scissors) and oligonucleotides bearing two acridine groups (RNA-activator for site-selective scission). RNA scission by Lu(III) ion always occurred at the phosphodiester linkages in front of the two acridines, even when the RNA specimens involved consecutive cytidine sequences of different lengths. Thus, even complicated mixtures of these indel specimens were completely genotyped by using only one acridine-bearing oligonucleotide and by subjecting the reaction mixture to single MS measurement. Moreover, single nucleotide polymorphism (SNP) in the consecutive sequences could be genotyped simultaneously with the indels.     

The elementary transformation of vector bundles on regular schemes

We give a generalized definition of an elementary transformation of vector bundles on regular schemes by using Maximal Cohen-Macaulay sheaves on divisors. This definition is a natural extension of that given by Maruyama, and has a connection with that given by Sumihiro. By this elementary transformation, we can construct, up to tensoring line bundles, all vector bundles from trivial bundles on nonsingular quasi-projective varieties over an algebraically closed field. Moreover, we give an application of this theory to reflexive sheaves.

     

VISUALIZATION OF DYNAMIC ORGANIZATION OF CYTOSKELETON GELS IN LIVING CELLS BY HYBRID-SPM

We succeeded in performing of hybrid Scanning Probe Microscopy (hybrid-SPM) in which mechanical-SPM andfluorescence microscopy are combined. This technique is able to measure simultaneously mechanical properties anddistribution of cytoskeletons of living cells by using green fluorescent protein. We measured evolution of both local elasticityand distributions of actin stress fibers in an identical fibroblast living in physiological conditions. The SPM experimentsrevealed that stiffer lines develop in living cells, which correspond to actin stress fibers. The elasticity of the actin stressfibers is as high as 100 kPa. We discuss mechanical effects on the development of actin filament networks.     

A Method of Orthogonal Oligosaccharide Synthesis Leading to a Combinatorial Library Based on Stationary Solid‐Phase Reaction

A new, efficient synthesis of oligosaccharides, which involves solid‐phase reactions without mixing in combination with an orthogonal‐glycosylation strategy, is described. Despite a great deal of biological interest, the combinatorial chemistry of oligosaccharides is an extremely difficult subject. The problems include 1) lengthy synthetic protocols required for the synthesis and 2) the variety of glycosylation conditions necessary for individual reactions. These issues were addressed and solved by using the orthogonal‐coupling protocol and the application of a temperature gradient to provide appropriate conditions for individual reactions. Furthermore, we succeeded in carrying out solid‐phase reactions with neither mechanical mixing nor flow. In this report, the synthesis of a series of trisaccharides, namely, α/β‐L ‐Fuc‐(1→6)‐α/β‐D ‐Gal‐(1→2/3/4/6)‐α/β‐D ‐Glc‐octyl, is reported to demonstrate the eligibility of the synthetic method in combinatorial chemistry.     

Reversible and stable redox behavior of a Pt(II) bis(dithiobenzoate)-type complex attributed to rotaxane-based stabilization

A three-dimensionally insulated Pt(II) bis(dithiobenzoate) complex with a [1]rotaxane structure was synthesized using permethylated cyclodextrins. We have confirmed macrocyclic insulation is necessary to yield the Pt(II) bis(dithiobenzoate) complex with high selectivity. Furthermore, the formed Pt(II) complex showed highly stable and reversible two-step redox behavior in cyclic voltammetry due to the three-dimensional insulation.