Surface modification of gold nanorods using layer-by-layer technique for cellular uptake

Gold nanorods (NRs), rod-shaped gold nanoparticles, were modified with bovine serum albumin (BSA) and polyethylenimine (PEI) using layer-by-layer technique. From absorption spectroscopy and zeta potential measurements, it was obvious that NRs were wrapped with these polymers without aggregation of NRs. Following BSA modification, the surface-modified NRs (BSA-NRs) were well-dispersed without aggregation in biochemical conditions, verified from absorption spectroscopy. Further modification with PEI provided positively charged NRs (PEI-NRs). A transmission electron microscopy image of PEI-NRs revealed that the surface modification did not affect changing the shape of the initial NRs. In addition, the PEI-NRs retained the colloidal stability of BSA-NRs in biochemical conditions. We have evaluated that transfection activity of PEI-NRs with HeLa cells. From results of gene expression experiments, it was obvious that the stabilization of NRs by BSA and further modification with PEI realized transfection using NRs into cultured cells. Moreover, the cellular uptake of NRs enabled cellular imaging using light scattering from the NRs.     

Free arrangements and coefficients of characteristic polynomials

Ziegler showed that the multirestriction of a free arrangement is also free. After Ziegler’s work, several results concerning the “reverse direction”, i.e., characterizing freeness of an arrangement via that of its multirestriction, have appeared. In this paper, we prove a new characterization of freeness in which the second Betti number of the arrangement plays a crucial role.     

Certification of butyltins and phenyltins in marine sediment certified reference material by species-specific isotope-dilution mass spectrometric analysis using synthesized <Superscript>118</Superscript>Sn-enriched organotin compounds

A new marine sediment certified reference material, NMIJ CRM 7306-a, for butyltin and phenyltin analysis has been prepared and certified by the National Metrological Institute of Japan at the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST). Candidate sediment material was collected at a bay near industrial activity in Japan. After air-drying, sieving, and mixing the material was sterilized with γ-ray irradiation. The material was re-mixed and packaged into 250 glass bottles (15 g each) and these were stored in a freezer at −30 °C. Certification was performed by use of three different types of species-specific isotope-dilution mass spectrometry (SSID–MS)—SSID–GC–ICP–MS, SSID–GC–MS, and SSID–LC–ICP–MS, with ¹¹⁸Sn-enriched organotin compounds synthesized from ¹¹⁸Sn-enriched metal used as a spike. The ¹¹⁸Sn-enriched mono-butyltin (MBT), dibutyltin (DBT), and tributyltin (TBT) were synthesized as a mixture whereas the ¹¹⁸Sn-enriched di-phenyltin (DPhT) and triphenyltin (TPhT) were synthesized individually. Four different extraction methods, mechanical shaking, ultrasonic, microwave-assisted, and pressurized liquid extraction, were adopted to avoid possible analytical bias caused by non-quantitative extraction and degradation or inter-conversion of analytes in sample preparations. Tropolone was used as chelating agent in all the extraction methods. Certified values are given for TBT 44±3 μg kg⁻¹ as Sn, DBT 51 ± 2 μg kg⁻¹ as Sn, MBT 67 ± 3 μg kg⁻¹ as Sn, TPhT 6.9 ± 1.2 μg kg⁻¹ as Sn, and DPhT 3.4 ± 1.2 μg kg⁻¹ as Sn. These levels are lower than in other sediment CRMs currently available for analysis of organotin compounds.     

Discrimination of 16 structural isomers of fucosyl galactoside based on energy-resolved mass spectrometry

Glycans, a family of compounds often attached to proteins and ceramides, are diverse molecules involved in a wide range of biological functions. Their structural analysis is necessary and is often carried out at the microscale level. Methods based on mass spectrometry are therefore used, although they do not provide information regarding isomeric structures often found in glycan structures. If one finds "factors" characteristic of a certain isomer, this information can be used to elucidate an unknown oligosaccharide sequence. One potential technique is to use energy-resolved mass spectrometry (ERMS) that has been used to distinguish a pair of isomeric compounds. Thus, compounds in a combinatorial library might be effectively used for this purpose. We analyzed a set of 16 isomeric disaccharides, the structures of which consisted of all possible combinations of anomeric configurations and interglycosidic linkage positions. All of the compounds were distinguished based on ERMS where normal collision-induced dissociation could distinguish only seven compounds. Furthermore, it was shown that alpha-glycosidic linkages of fucose were more reactive than the beta-isomers and the secondary glycosides were more reactive than the primary glycosides.     

Anomeric information obtained from a series of synthetic trisaccharides using energy resolved mass spectra

The majority of structural investigations of oligosaccharides based on mass spectrometry use naturally occurring oligosaccharides, which do not allow extracting any common feature associated with anomeric structures and linkage positions. In order to address the issue to find such characteristics possibly contained in oligosaccharide structure, a synthetic combinatorial trisaccharide library was analyzed. The trisaccharides used in the analysis consisted of L-fucose, D-galactose and D-glucose, in which individual glycosidic linkages existed in either alpha- or beta-anomers. The analysis of energy-resolved mass spectra (ERMS) and the scattered plot analysis of some parameters obtained from ERMS for a series of trisaccharides revealed that lower activation energy was required for the dissociation of alpha-glycosides of these sugars compared to those of the corresponding beta-anomers. It is suggested that this finding may be useful in structural analysis of natural oligosaccharides.     

In situ small-angle neutron scattering and rheological measurements of shear-induced gelation

The microscopic structure of shear-induced gels for a mixed solution of 2-hydroxyethyl cellulose and nanometer-size spherical droplets has been investigated by in situ small-angle neutron scattering (SANS) with a Couette geometry as a function of shear rate gamma. With increasing gamma, the viscosity increased rapidly at gamma approximately 4.0 s(-1), followed by a shear thinning. After cessation of shear, the system exhibited an extraordinarily large steady viscosity. This phenomenon was observed as a shear-induced sol-gel transition. Real-time SANS measurements showed an increase in the scattering intensity exclusively at low scattering angle region. However, neither orientation of polymer chains nor droplet deformation was detected and the SANS patterns remained isotropic irrespective of gamma. It took about a few days for the gel to recover its original sol state. A possible mechanism of gelation is proposed from the viewpoint of shear-induced percolation transition.     

Brønsted base-assisted boronic acid catalysis for the dehydrative intramolecular condensation of dicarboxylic acids

Br?nsted base-assisted boronic acid catalysis for the dehydrative self-condensation of carboxylic acids is described. Arylboronic acid bearing bulky (N,N-dialkylamino)methyl groups at the 2,6-positions can catalyze the intramolecular dehydrative condensation of di- and tetracarboxylic acids. This is the first successful method for the catalytic dehydrative self-condensation of carboxylic acids.     

Rheo-SANS studies on shear-thickening/thinning in aqueous rodlike micellar solutions

Shear-induced thickening/thinning phenomena of aqueous rodlike micellar solutions of cetyltrimethylammonium bromide (CTAB) and sodium p-toluene sulfonate (NapTS) were investigated by means of simultaneous measurements of rheology and small-angle neutron scattering (SANS), the so-called Rheo-SANS. The aqueous CTAB/NapTS solutions were classified into five different categories dependent on their flow behavior and micellar structure. By increasing salt concentration and/or shear rates, the micelles underwent morphological transition from (i) spherical or short rodlike micelles to (ii) long rodlike micelles without entanglements, followed by (iii) those with entanglements. These transitions were recognized as changes in flow behavior from Newtonian to shear-thickening and shear-thinning flow, respectively. In the latter two cases, anisotropic SANS patterns appeared around these critical shear rates. The physical meaning of the anisotropic SANS patterns accompanied by shear-thickening flow behavior is discussed in conjunction with other shear-thickening systems.     

Molecular size fractionation of soil humic acids using preparative high performance size-exclusion chromatography

High performance size-exclusion chromatography (HPSEC) is useful for the molecular size separation of soil humic acids (HAs), but there is no method available for various HAs with different chemical properties. In this paper the authors propose a new preparative HPSEC method for various soil HAs. Three soil HAs with different chemical properties were fractionated by a Shodex OHpak SB-2004 HQ column with 10mM sodium phosphate buffer (pH 7.0)/acetonitrile (3:1, v/v) as an eluent. The HAs eluted within a reasonable column range time (12-25 min) without peak tailing. Preparative HPSEC chromatograms of these HAs indicated that non-size-exclusion effects were suppressed. The separated fractions were analyzed by HPSEC to determine their apparent molecular weights. These decreased sequentially from fraction 1 to fraction 10, suggesting that the HAs had been separated by their molecular size. The size-separated fractions of the soil HA were mixed to compare them with unfractionated HA. The analytical HPSEC chromatogram of the mixed HA was almost identical to that of the unfractionated HA. It appears that the HAs do not adsorb specifically to the column during preparative HPSEC. Our preparative HPSEC method allows for rapid and reproducible separation of various soil HAs by molecular size.     

Molecular Design Rule of Phthalocyanine Dyes for Highly Efficient Near‐IR Performance in Dye‐Sensitized Solar Cells

A series of zinc–phthalocyanine sensitizers ( PcS16 – 18 ) with different adsorption sites have been designed and synthesized in order to investigate the dependence of adsorption‐site structures on the solar‐cell performances in zinc–phthalocyanine based dye‐sensitized solar cells. The change of adsorption site affected the electron injection efficiency from the photoexcited dye into the nanocrystalline TiO₂ semiconductor, as monitored by picosecond time‐resolved fluorescence spectroscopy. The zinc–phthalocyanine sensitizer PcS18 , possessing one carboxylic acid directly attached to the ZnPc ring and six 2,6‐diisopropylphenoxy units, showed a record power conversion efficiency value of 5.9 % when used as a light‐harvesting dye on a TiO₂ electrode under one simulated solar condition.