Stabilization for development of thermoplastic film in electron beam recording

A method for stabilization in development of thermoplastic film is proposed. The method is applied to an electron beam recording system and its usefulness is confirmed experimentally. By using this method, the characteristic curve of a thermoplastic film is correctly measured and a one dimensional, first-order differentiation filter of the phase hologram type is made of the film.     

Applications of the interface approach to some frustrated Ising models on a simple cubic lattice

Three 3-dimensional frustrated Ising models are studied by the interface method. We calculate the interface free energies by Monte Carlo simulation, and estimate the critical temperatures with a size-dependent analysis of the interface free energies.     

Facile synthetic methods of acetals and crown ethers from the reaction of diphenyldiazomethane with 2,3-dichloro-5,6-dicyanobenzoquinone in the presence of alcohols

The reaction of diphenyldiazomethane with 2,3-dichloro-5,6-dicyano-benzoquinone in the presence of alcohols and thiols gave the corresponding benzophenone acetals and thioacetals at 20–25°C in 1,2-dichloro-ethane. The mechanism of the reaction will be discussed.     

Polarization of neutrons from the d-t reaction and in n-p scattering

The polarization of 32 MeV neutrons from the d-t reaction has been measured using n-He scattering at an angle of 130° (lab). A He gas scintillator was used as a scatterer, and the scattered neutrons were measured by counting the He recoils which were coincident with pulses from the side detector and which were synchronized with the deuteron beam bunch. Polarizations in n-p scattering have been measured using the polarized neutrons at angles of 30°, 40° and 50° (lab).     

Structural coupling of an arginine side chain with the oxygen-evolving Mn4Ca cluster in photosystem II as revealed by isotope-edited Fourier transform infrared spectroscopy

Photosynthetic oxygen evolution by plants, algae, and cyanobacteria is performed at the Mn(4)Ca cluster in photosystem II (PSII) by light-driven water oxidation. It has been proposed that CP43-Arg357, which is located in the vicinity of the Mn(4)Ca cluster, plays a key role in the O(2) evolution mechanism; however, direct evidence for its involvement in the reaction has not yet been obtained. In this study, we have for the first time detected the structural coupling of CP43-Arg357 with the Mn(4)Ca cluster by means of isotope-edited Fourier transform infrared (FTIR) spectroscopy. Light-induced FTIR difference spectra upon the S(1)→S(2) transition (S(2)/S(1) difference spectra) of the Mn(4)Ca cluster were measured using isolated PSII core complexes from Synechocystis sp. PCC 6803 cells, where the Arg side chains were labeled with either [η(1,2)-(15)N(2)]Arg or [ζ-(13)C]Arg. Bands due to Arg side chain vibrations, which were extracted by taking a double difference between the S(2)/S(1) spectra of isotope-labeled and unlabeled samples, were found at 1700-1600 and 1700-1550 cm(-1) for [η(1,2)-(15)N(2)]Arg- and [ζ-(13)C]Arg-labeled PSII, respectively. These frequency regions are in good agreement with those of the CN/NH(2) vibrations of a guanidinium group in difference spectra between isotope-labeled and unlabeled Arg in aqueous solutions. The detected Arg bands in the S(2)/S(1) difference spectra were attributed to CP43-Arg357, which is the only Arg residue located near the Mn(4)Ca cluster. The presence of relatively high frequency bands arising from unlabeled Arg suggested that the guanidinium N(η)H(2) is engaged in strong hydrogen bonding. These results indicate that CP43-Arg357 interacts with the Mn(4)Ca cluster probably through direct hydrogen bonding to a first coordination shell ligand of a redox-active Mn ion. This structural coupling of CP43-Arg357 may play a crucial role in the water oxidation reactions.     

Tracking of the nuclear wavepacket motion in cyanine photoisomerization by ultrafast pump-dump-probe spectroscopy

Understanding ultrafast reactions, which proceed on a time scale of nuclear motions, requires a quantitative characterization of the structural dynamics. To track such structural changes with time, we studied a nuclear wavepacket motion in photoisomerization of a prototype cyanine dye, 1,1'-diethyl-4,4'-cyanine, by ultrafast pump-dump-probe measurements in solution. The temporal evolution of wavepacket motion was examined by monitoring the efficiency of stimulated emission dumping, which was obtained from the recovery of a ground-state bleaching signal. The dump efficiency versus pump-dump delay exhibited a finite rise time, and it became longer (97 fs → 330 fs → 390 fs) as the dump pulse was tuned to longer wavelengths (690 nm → 950 nm → 1200 nm). This result demonstrates a continuous migration of the leading edge of the wavepacket on the excited-state potential from the Franck-Condon region toward the potential minimum. A slowly decaying feature of the dump efficiency indicated a considerable broadening of the wavepacket over a wide range of the potential, which results in the spread of a population distribution on the flat S(1) potential energy surface. The rapid migration as well as broadening of the wavepacket manifests a continuous nature of the structural dynamics and provides an intuitive visualization of this ultrafast reaction. We also discussed experimental strategies to evaluate reliable dump efficiencies separately from other ultrafast processes and showed a high capability and possibility of the pump-dump-probe method for spectroscopic investigation of unexplored potential regions such as conical intersections.     

Development of a far-red to near-infrared fluorescence probe for calcium ion and its application to multicolor neuronal imaging

To improve optical imaging of Ca(2+) and to make available a distinct color window for multicolor imaging, we designed and synthesized CaSiR-1, a far-red to near-infrared fluorescence probe for Ca(2+), using Si-rhodamine (SiR) as the fluorophore and the well-known Ca(2+) chelator BAPTA. This wavelength region is advantageous, affording higher tissue penetration, lower background autofluorescence, and lower phototoxicity in comparison with the UV to visible range. CaSiR-1 has a high fluorescence off/on ratio of over 1000. We demonstrate its usefulness for multicolor fluorescence imaging of action potentials (visualized as increases in intracellular Ca(2+)) in brain slices loaded with sulforhodamine 101 (red color; specific for astrocytes) that were prepared from transgenic mice in which some neurons expressed green fluorescent protein.     

Encapsulated energy-transfer cassettes with extremely well resolved fluorescent outputs

This paper concerns the development of water-compatible fluorescent imaging probes with tunable photonic properties that can be excited at a single wavelength. Bichromophoric cassettes 1a-1c consisting of a BODIPY donor and a cyanine acceptor were prepared using a simple synthetic route, and their photophysical properties were investigated. Upon excitation of the BODIPY moiety at 488 nm the excitation energy is transferred through an acetylene bridge to the cyanine dye acceptor, which emits light at approximately 600, 700, and 800 nm, i.e., with remarkable dispersions. This effect is facilitated by efficient energy transfer that gives a "quasi-Stokes" shift between 86 and 290 nm, opening a huge spectral window for imaging. The emissive properties of the cassettes depend on the energy-transfer (ET) mechanism: the faster the transfer, the more efficient it is. Measurements of rates of ET indicate that a through-bond ET takes place in the cassettes 1a and 1b that is 2 orders of magnitude faster than the classical through-space, F?rster ET. In the case of cassette 1c, however, both mechanisms are possible, and the rate measurements do not allow us to discern between them. Thus, the cassettes 1a-1c are well suited for multiplexing experiments in biotechnological methods that involve a single laser excitation source. However, for widespread application of these probes, their solubility in aqueous media must be improved. Consequently, the probes were encapsulated in calcium phosphate/silicate nanoparticles (diameter ca. 22 nm) that are freely dispersible in water. This encapsulation process resulted in only minor changes in the photophysical properties of the cassettes. The system based on cassette 1a was chosen to probe how effectively these nanoparticles could be used to deliver the dyes into cells. Encapsulated cassette 1a permeated Clone 9 rat liver cells, where it localized in the mitochondria and fluoresced through the acceptor part, i.e., red. Overall, this paper reports readily accessible, cyanine-based through-bond ET cassettes that are lypophilic but can be encapsulated to form nanoparticles that disperse freely in water. These particles can be used to enter cells and to label organelles.