Influence of nonionic emulsifier included inside carboxylated polymer particles on the formation of multihollow structure by the alkali/cooling method

The influence of nonionic emulsifier, included inside styrene-methacrylic acid copolymer [P(S-MAA)] particles during emulsion copolymerization, on the formation of multihollow structure inside the particles via the alkali/cooling method (proposed by the authors) was examined in comparison to emulsifier-free particles. It was clarified that the nonionic emulsifier included inside the P(S-MAA) particles eased the formation of multihollow structure.Part CCL of the series studies on suspension and emulsion     

Rapid ruthenium-catalyzed synthesis of pyranopyrandiones by reconstructive carbonylation of cyclopropenones involving C[bond]C bond cleavage

Pyranopyrandiones were prepared by a novel ruthenium-catalyzed carbonylative dimerization of cyclopropenones via C-C bond cleavage. For example, treatment of dipropylcyclopropenone with a catalytic amount of Ru3(CO)12 and NEt3 in THF under 15 atm of carbon monoxide at 140 degrees C for 20 h gave a novel functional monomer, 3,4,7,8-tetrapropylpyrano[6,5-e]pyran-2,6-dione, in an isolated yield of 81%. Unsymmetrically substituted pyranopyrandiones were also obtained by ruthenium-catalyzed carbonylative coupling of cyclopropenones with alkynes under similar reaction conditions.     

The S2 emission characteristics of several organic sulfur compounds obtained by molecular emission cavity analysis and pyrolysis

Emission profiles of several organic sulfur compounds are investigated by modified molecular emission cavity analysis (MECA). Thiourea, 1,3-diethylthiourea, S-methyl- cysteine and taurine are pyrolyzed in a hydrogen stream and the pyrolytic products are determined by gas chromatography. The S₂ emission mechanism is discussed on the basis of emission profiles and the composition of the pyrolytic products. Although some compounds give multipeaked responses, the splitting disappears when a worn surface cavity is used or oxalic acid is added to the sulfur compound in the cavity. When the emission profile from thiourea is compared with that from 1,3-diethylthiourea, it is clear that the multipeaked response is due to quenching by degradation products of the latter compound. The main product of pyrolysis is hydrogen sulfide. The emission intensity is related to the yield of hydrogen sulfide in pyrolysis. As methylmercaptan was not detected in the pyrolysis products, it is suggested that the quenching by the organic fragments results from their hydrogen consumption rather than their reaction with sulfur species. The S₂ emission from sulfur-containing compounds is rapidly complete in the presence of oxalic acid, and it is suggested that such compounds are subject to reductive breakdown in the cavity.     

A study of novel heat-resistant polymers: Preparation of photosensitive fluorinated polybenzoxazole precursors and physical properties of polybenzoxazoles derived from the precursors

A series of novel photosensitive polybenzoxazole precursors were prepared from polycondensation of 2,2-bis(3,3′-amino-4,4′-hydroxyphenyl)hexafluoropropane with photosensitive dicarboxylic acid chlorides such as p-phenylenediacryloyl chloride and benzophenone-4,4′-dicarboxylic chloride. The precursors are soluble in common organic solvents owing to the presence of perfluoromethyl groups in the chain structure, and insolubilized in the solvents on irradiation with the light. Polybenzoxazole patterns with high resolution as well as high aspect ratio were reproduced by baking the precursor patterns at 300°C. The pattern shrinkage on the conversion to polybenzoxazole was slight. The polybenzoxazole films offered good heat-resistance up to 400°C in addition to good electrical properties.     

Antithrombogenicity of cultured endothelial cell-detached surface

To examine the antithrombogenicity of cultured endothelial cell-detached surface, a simple hybrid vascular model tube consisting of a glass tube and endothelial cells was constructed. To detach the endothelial cells from the inner surface of the model tube, a steady shear stress of 2 or 8 N m(-2) was imposed onto the surface of endothelial cell monolayer by means of a coaxial double cylinder rotational-type apparatus. Coagulation of blood in contact with the endothelial cell-detached surface was examined using a damped oscillation rheometer. Coagulation of whole blood in the cell-detached tube occurred at about 40 min, which was almost the same as that in the endothelial cell-coated tube. A few platelets without shape change adhered to the endothelial cell-detached surface. These data suggest that the endothelial cell-detached surface may exhibit antithrombogenic and anticoagulant surfaces. Biochemical analyses showed that the glass surface, where endothelial cell was detached, was covered with components such as collagen type IV that is considered to be produced from the endothelial cells on the glass surface.     

Rheology of PVC plastisol--VI: criteria for yielding and fracture of an immobilized layer

PVC plastisol exhibits pseudo-plastic flow in steady shear; that is, viscosity decreases with the increasing shear rate. At higher shear rates viscosity reaches a minimum and then increases, i.e., dilatant behavior. Previously, pseudo-plastic behavior was explained by a mechanism in which the suspended particles partition into an immobilized layer and a mobile phase. The development of the immobilized layer with the increase in shear rate was shown to quantitatively account for pseudo-plastic behavior. In higher shear rates dilatation of the immobilized layer was shown to be the cause of dilatacy. At even higher shear rates the immobilized layer fractures. In this paper the viscosity minimum was interpreted as the yielding of the immobilized layer. Subsequently, data in the literature were analyzed to find criteria for the yielding and fracture of the immobilized layer. Yielding was found to obey Coulomb's criterion, from which the coefficient of friction and the cohesive strength of the immobilized layer were evaluated. These properties were controlled by the nature of particle assembly in the immobilized layer and the plasticizer type had only a minor effect. The value of the coefficient of friction was on the lower side and within the range of values found in the literature for other materials. There were two modes of fracture of the immobilized layer, one with low strength, low strain to break, and the other with high strength, high strain to break. The former is analogous to the brittle fracture of solids and the latter ductile failure. The strength of brittle fracture was somewhat higher than cohesive strength, which was evaluated from yielding data. This is akin to Griffith's criterion for brittle fracture of a solid. Ductile failure occurred when the shear stress exceeded normal stress.     

Effect of syndiotacticity on the aqueous poly(vinyl alcohol) gel 3. Mechanical property of gel

Summary The mechanical property of aqueous gel was studied using the PVA having the content of syndiotacticity in diad from 58.4 and 66.2%. The elastic modulus of gels was 105–106 dyne/cm2 and the variation of the elastic modulus of gel with the rise of temperature was corresponded with the variation of the concentration of PVA in gel accompanying syneresis. The elastic modulus of gel having the same content of syndiotacticity and concentration of PVA increased in the order as follows, the first is the gel chilled at room temperature, the second is the gel chilled at 60 °C and last is the gel chilled at 0 °C. The variation of the elastic modulus of gel with the rise of temperature became smaller with increasing content of syndiotacticity. The increase of elastic modulus is considered to be attributed to the further growth of stronger junctions through the recrystallization followed by syneresis rather than the entropic effect of polymer networks with the rise of temperature.

---

Zusammenfassung Es wurden die mechanischen Eigenschaften wßriger Gele aus Polyvinylalkohol untersucht, mit Gehalten an Syndioaktizität in Diaden zwischen 58,4 und 66,2%. Die elastischen Moduln der Gele lagen bei 105 bis 106 dyn/cm2 und die Variation der elastischen Moduln der Gele mit Steigerung der Temperatur entsprach der Konzentrationsänderung von Polyvinylalkohol im Gele gemäß der stattgefundenen Synärese. Der elastische Modul des Gels mit konstantem Gehalt an Syndiotaktizität und Konzentration des PVA steigen in folgender Weise: Zuerst das Gel abgekühlt bei Raumtemperatur, dann das Gel abgekühlt bei 60 °C und zuletzt das Gel erstarrt bei 0 °C. Die Variation der elastischen Moduln mit steigender Temperatur wird kleiner mit steigendem Gehalt an Syndiotaktizität. Das Anwachsen der Moduln sollte vermutlich dem weiteren Wachstum strengerer Kopp lungen durch Rekristallisation infolge der Synärese zuzuschreiben sein mehr als einem Entropieeffekt der polymeren Netzwerke mit steigender Temperatur.

---

---

With 6 figures and 2 tables

---

Part 2. cf. reference 2.