Phase behavior and solution properties of sodium (3-dodecanoyloxy-2-hydroxy-propyl) succinate in water

Sodium (3-dodecanoyloxy-2-hydroxy-propyl) succinate (SLGMS) is a conjugated anionic surfactant in which a glycerol residue connects with a hydrophilic sodium succinate and dodecanoate. Aqueous micellar phase (W_m), hexagonal (H₁), bicontinuous cubic (V₁), and lamellar (L_α) phases are successively formed with increasing the surfactant concentration in a binary SLGMS-water system. The Krafft point is below 0 °C. The effective cross sectional area per surfactant molecule, a _s, in the H₁ phase is almost constant, 0.5 nm², and the shape of cylindrical micelle is almost unchanged with surfactant concentration. The cmc value of SLGMS measured by means of surface tension, electrical conductivity, and fluorescence probe methods is in the range of 4∼9 × 10⁻⁵ mol/l that is much lower than that of sodium dodecanoate, 2 × 10⁻² mol/l, or SDS, 8 × 10⁻³ mol/l. Hence, it is considered that the polar glycerol part in the SLGMS acts as a hydrophobic part. The solubilization of oil in the SLGMS solution is much higher than that in the SDS solution and this also suggests that the glycerol and succinic units act as lipophilic moieties. Received: 15 June 2000/Accepted: 27 July 2000     

High-speed separation system of randomly suspended single living cells by laser trap and dielectrophoresis

We developed a new system for random separation of a single microorganism, such as a living cell and a microbe, in the microfluidic device under the microscope by integrating the laser-trapping force and dielectrophoretic (DEP) force. An arbitrarily selected single microbe could be isolated in a microchannel, despite the presence of a large number of microbes in solution. Once the target microbe is trapped at the focal point of the laser, we can easily realize exclusion of excess microbes around the target by controlling the electric field, while keeping the target trapped by the laser at the focal point. To realize an efficient separation system, we proposed a new separation cell and produced it by microfabrication. Flow speed in the microchannel is adjusted and balanced to realize high-speed and high-purity extraction of the target. Some preliminary experiments are conducted to show the effectiveness. The target is trapped by the laser, transported, and is taken out from the extraction port. Total separation time is less than 20 s. Our method is extremely useful in the pure cultivation of the cell and will be a promising method for biologists in screening useful microbes.     

Reverse aromatic cope rearrangement of 2-allyl-3-alkylideneindolines driven by olefination of 2-allylindolin-3-ones: synthesis of alpha-allyl-3-indole acetate derivatives

The reverse aromatic Cope rearrangement of 2-allyl-3-alkylideneindolines obtained by Horner-Wadsworth-Emmons olefination of 2-allylindolin-3-ones was performed. When 2-allylindolin-3-ones were treated with phosphonium ylides in refluxing toluene, domino Wittig reaction and reverse aromatic Cope rearrangement took place to give alpha-allyl-3-indole acetate derivatives in good yields. The aromatization as a new driving force in the Cope rearrangement is preferable to the conjugation with the carbonyl and cyano groups and also to the alkyl substitution pattern, which are well-known driving forces.     

Anionic Sublattices in Halide Solid Electrolytes: A Case Study with the High-Pressure Phase of Li3ScCl6

The Li₃MX₆ compounds (M=Sc, Y, In; X=Cl, Br) are known as promising ionic conductors due to their compatibility with typical metal oxide cathode materials. In this study, we have successfully synthesized γ-Li₃ScCl₆ using high pressure for the first time in this family. Structural analysis revealed that the high-pressure polymorph crystallizes in the polar and chiral space group P6₃mc with hexagonal close-packing (hcp) of anions, unlike the ambient-pressure α-Li₃ScCl₆ and its spinel analog with cubic closed packing (ccp) of anions. Investigation of the known Li₃MX₆ family further revealed that the cation/anion radius ratio, r_M/r_X, is the factor that determines which anion sublattice is formed and that in γ-Li₃ScCl₆, the difference in compressibility between Sc and Cl exceeds the ccp r_M/r_X threshold under pressure, enabling the ccp-to-hcp conversion. Electrochemical tests of γ-Li₃ScCl₆ demonstrate improved electrochemical reduction stability. These findings open up new avenues and design principles for lithium solid electrolytes, enabling routes for materials exploration and tuning electrochemical stability without compositional changes or the use of coatings.     

Highly selective photoinduced perfluoroalkylation of vinylsilanes and its application to synthesis of water-shedding polysilanes

The functionalization of polysilanes is an important subject in materials science because functionalized polysilanes are expected to exhibit potentially innovative properties. This research aims at the addition of a water-shedding property to polysilanes by introducing perfluoroalkyl groups into their skeleton. The photoinduced iodoperfluoroalkylation of various vinylsilanes takes place successfully upon irradiation with a xenon lamp: vinylmonosilanes undergo iodoperfluoroalkylation with perfluoroalkyl iodides (R_fI) regioselectively, and the corresponding perfluoroalkylated silanes are obtained in moderate to high yields. Detailed optimization of the photoinduced iodoperfluoroalkylation has been investigated to apply this method to the functionalization of polysilanes. Polysilanes having vinyl groups can be synthesized by the reductive coupling of dichlorovinylsilanes with samarium diiodide (SmI₂) and samarium metal (Sm) upon irradiation with visible light. The synthesized vinylpolysilanes and R_fI (about 1.0 mM CHCl₃ solution) are coated on a glass plate sequentially, and then the following photoirradiation with light of a wavelength over 300 nm successfully adds an excellent water-shedding property to the glass plate.     

Extraction chromatography with macroreticular polymer beads impregnated with monothiodibenzoylmethane solution

Extraction chromatography using macroreticular ethylstyrene-divinylbenzene beads impregnated with monothiodibenzoylmethane (SBB) solution has been investigated. Of the solvents used as the stationary phase, heptan-1-ol showed the highest rate of metal extraction, and loading with 0.5 ml of the solvent per g of resin was found to be the optimum. A column packed with such loaded beads can be used for the separation of nickel(II), iron(III) and cobalt(II).     

Preparation and analytical properties of a chelating resin containing phenylalanine groups

A polystyrene-based macroreticular resin containing phenylalanine groups has been prepared and its analytical properties have been investigated and compared with Dowex A-1. The phenylalanine resin shows high selectivity for mercury(II) and copper(II) in the pH region 2-3. The sorption behaviour of copper has been examined in detail, with the intention of using the resin analytically. The important characteristics of the resin are fast equilibration, high selectivity and small volume change between its hydrogen form and metal forms. These enable it to be applied for the rapid concentration of trace amounts of copper in the presence of large amounts of diverse metals. It may be used for the determination of copper in sea-water and the separation of copper/cobalt and copper/nickel.     

Bioavailability study of commercial sustained-release preparations of diclofenac sodium in gastrointestinal physiology regulated-dogs.

The gastrointestinal (GI) physiology of beagle dogs was regulated with a combined-treatment of intramuscular pentagastrin (10 micrograms/kg x 2) and intravenous atropine sulfate (0.02 mg/kg x 1). Here, the gastric acidity, the gastric emptying time and the small intestinal transit time in the regulated-dogs were respectively around pH 2, 0.7h and 4h, approximating those in healthy humans. The superiority of the regulated-dogs over the intact dogs was confirmed in comparative bioavailability studies by using two classes of commercial preparations. Both the conventional tablet and the sustained-release capsule of diclofenac sodium exhibited simple and similar average plasma concentration-time curves of free diclofenac in the intact dogs, while the latter preparation is reported to reveal a bimodal plasma curve of the drug in healthy humans. The regulated-dogs, however, permitted a bimodal average plasma pattern of the drug for the capsules due to an approximation of the GI physiology between humans and these classes of the dogs. The combined-treatment of beagle dogs with pentagastrin and atropine sulfate seems to supply a useful animal model in predicting the absorption characteristics of the sustained-release preparations and poor water-soluble drugs.     

Purines. LII. Synthesis and biological evaluation of 8-methylguanine 7-oxide and its 9-arylmethyl derivatives.

The synthesis of 8-methylguanine 7-oxide (3) was accomplished via a "phenacylamine route", which started from condensation of alpha-(4-methoxybenzylamino)propiophenone (6), prepared by coupling of alpha-bromopropiophenone (4) and 4-methoxybenzylamine (5), with 2-amino-6-chloro-5-nitro-4(3H)-pyrimidinone (7) and proceeded through cyclization of the resulting phenacylaminopyrimidinone (8) and removal of the 4-methoxybenzyl group. The N-oxide 3 and its 9-arylmethyl derivatives 9 and 11 showed only very weak antileukemic activity and no antimicrobial activity.     

Diacetylene-containing polymers,II. Polyesters and polyurethanes containing m,m′-butadiynylenedibenzyl groups

Diacetylene-containing polyesters and polyurethanes were prepared by the reaction of m,m-butadiynylenedibenzyl alcohol with isophthaloyl chloride, sebacoyl chloride, hexamethylene diisocyanate and 2,4-tolylene diisocyanate. Their thermal behavior was studied by optical microscope and differential scanning calorimetry (DSC). The polyesters were crystalline. The polyurethane prepared from hexamethylene diisocyanate and polyphthalates crystallized on cooling from their melts. All turned a reddish brown color on heating at temperatures above 200°C, and prolonged heating led to a black resin, but thermal decomposition could not be avoided. Irradiation by γ-ray and UV light at room temperature deepened the color of the films, but the polymerization of the diacetylene groups was not appreciable. Simultaneous heating and irradiation was necessary to obtain transparent, amorphous, wine red colored films.