Gas sorption in poly(vinyl benzoate)

High-pressure sorption (up to 50 atm) for CO₂, N₂, and Ar in poly(vinyl benzoate) (PVB) was studied at temperatures from 25 to 70°C by a gravimetric method utilizing an electromicrobalance. The results are described by Henry's law above the glass transition temperature T_g for all gases. The dual-mode sorption model, Henry's law plus a Langmuir isotherm, applies to the sorption isotherms of N₂ and Ar in the glassy state, and the dual-mode parameters are given. For CO₂, a new type of sorption isotherm is observed below T_g. The isotherm is concave to the pressure axis in the low-pressure region and turns into a straight line with increasing CO₂ pressure which can be extrapolated back to the coordinate origin. The linear part of the isotherm is characteristic of the rubbery state, while the nonlinear part stems from glassystate behavior. The “glass transition solubility” of CO₂, at which PVB film changes from the glassy to the rubbery state, decrease as the temperature increases. The disappearance of microvoids, that is, the decrease of the Langmuir capacity, may be due to a large plasticizing effect of sorbed CO₂. The difference between the N₂ and Ar isotherms and the CO₂ isotherm is discussed from this standpoint.     

An efficient and selective conversion of sorbitol in ionic liquids: Use of ion exchange resin as a solid acid catalyst

Sorbitol was readily converted by heating in hydrophobic ionic liquids by the presence of ion exchange resins. Chemoseletivity of the dehydration depended on the choice of ion exchange resin; Nafion selectively produced isosorbide while Amberlite gave 1,5-anhydrosorbitol along with unreacted sorbitol. Ionic liquids used in the reaction were readily recovered by simple extraction procedure. With these procedures, we succeeded to prepare isosorbide in pure form, not contaminated with either ionic liquids or acid catalyst, by simple experimental procedure.     

Chirality Control by Substituents in the Asymmetric Addition of Et_2Zn to Aromatic Aldehydes Catalyzed by cis-(1 R,2S)-2- Benzamidocyclohexanecarboxylic Acid Derived 1,3-Aminoalcohols

A series of novel optically active 1,3‐aminoalcohols based on cis‐(1R,2S)‐2‐benzamidocyclohexanecarboxylic acid and trans‐(1R,2R)‐2‐benzamidocyclohexanecarboxylic acid were synthesized and used in the asymmetric diethylzinc addition to aromatic aldehydes. Not only the enantioselectivity but also the stereochemistry of the product were controlled by the N‐substituents and the substituents on the vicinity carbon to hydroxyl group of the cis‐derivatives.     

Theoretical Analysis of Super-Resolution Optical Disk Mastering Using a Photoreactive Dye Mask Layer

The super-resolution mastering of read-only optical disks using a photoreactive bleachable dye mask layer was theoretically analyzed. Equations have been derived which describe the photoreactions of the resist layer and mask layer. A numerical simulation based on these equations showed that the transmittance of the mask directly affects the quality of the formed pit shape. A high-quality pit shape is obtained by using a low transmittance mask.     

Sorption and partial molar volume of gases in poly (dimethyl siloxane)

Sorption of N₂, O₂, Ar, CH₄, CO₂, C₂H₄, and C₂H₆ in poly (dimethyl siloxane) liquid and rubber and the dilation of the polymers due to sorption of the gases are studied at 25°C under pressures up to 50 atm. In the liquid, the sorption isotherms for low-solubility and high-solubility gases are described by Henry's law and the Flory–Huggins equation, respectively. Gas sorption in the rubber, which contains a 29 wt % silica filler, follows the dual-mode sorption model, though marked hysteresis is observed in the sorption of O₂ and CH₄. The dilation isotherms increase linearly or exponentially in both polymers with increasing pressure. Considering that gas molecules adsorbed into micropores of the filler particles do not participate in the dilation, partial molar volumes of the dissolved gases in the rubber are determined from data of sorption and dilation. The values are nearly equal to the partial molar volumes in the liquid (48–60 cm³/mol).     

One‐Step Borylation of 1,3‐Diaryloxybenzenes Towards Efficient Materials for Organic Light‐Emitting Diodes

The development of a one‐step borylation of 1,3‐diaryloxybenzenes, yielding novel boron‐containing polycyclic aromatic compounds, is reported. The resulting boron‐containing compounds possess high singlet‐triplet excitation energies as a result of localized frontier molecular orbitals induced by boron and oxygen. Using these compounds as a host material, we successfully prepared phosphorescent organic light‐emitting diodes exhibiting high efficiency and adequate lifetimes. Moreover, using the present one‐step borylation, we succeeded in the synthesis of an efficient, thermally activated delayed fluorescence emitter and boron‐fused benzo[6]helicene.     

Yojironins A−D, meroterpenoids and prenylated acylphloroglucinols from Hypericum yojiroanum

Two new meroterpenoids, yojironins A (1) and B (2), were isolated from the whole plants of Hypericum yojiroanum, together with two new prenylated acylphloroglucinols, yojironins C (3) and D (4). Their structures were elucidated by spectroscopic data. Yojironins A (1) and B (2) are biogenetically unique meroterpenoids, which seem to be composed of two acetate units with a 2-methylbutanoyl group and three isoprene units. Yojironin A (1) exhibited antimicrobial activity.     

Construction of hydrogen-bonded ternary organic crystals derived from L-tartaric acid and their application to enantioseparation of secondary alcohols

Ternary organic crystals consisting of an L-tartaric acid-derived dicarboxylic acid, a commercially available achiral diamine, and a chiral secondary alcohol have been developed and characterized by X-ray crystallography. 1D, 2D, and 3D hydrogen-bonded supramolecular networks were constructed, depending on the structure of the diamine used. Benzylic and aliphatic secondary alcohols were enantioselectively incorporated into the crystal and were successfully enantioseparated with up to 86 and 79% enantiomeric excess (ee), respectively. Selective incorporation of one enantiomer of 2-butanol, which is a small chiral aliphatic alcohol, was achieved by the cooperative effects of hydrogen bonds, CH···π interactions, and van der Waals interactions between the guest and host molecules, with the aid of two water molecules. The high host potential of the binary supramolecular system is mainly attributed to the skewed conformation of two rigid aromatic groups of tartaric acid derivatives, which prevents dense packing of the molecules and enhances the formation of multicomponent inclusion crystals.     

Measurements of Liquid-Phase Adsorption under High Pressure

Adsorption equilibria at about 1000 atm were measured for aqueous solutions of aromatic compounds. No significant difference between the isotherms at atmospheric pressure and at 1000 atm was found for nitrobenzene and ethylbenzene on activated carbon fiber. The decrease in the amount adsorbed due to the solubility increase with pressure and the increase in the amount adsorbed caused by compression of the adsorbed phase were considered to cancel each other. On the other hand, pressure had a marked effect on the adsorption of L-phenylalanine on a macroreticular adsorbent, resulting in a 1.5 to 2 times larger amount adsorbed at 1500 atm. The pressure effect was greater with larger amounts adsorbed. This implies that the molar volume of the adsorbed state is smaller than those of the pure state and dissolved state, and varies with the amount adsorbed.