The unprecedented role of a CuII cryptand in the luminescence properties of a EuIII cryptate complex

Abstract  

A Eu^III cryptate complex constructed from a Cu^II cryptand with an L ^tBu ligand, [Eu^IIICu₂^II(L ^tBu)₂(NO₃)₃(MeOH)], and the corresponding Ca^II and Na^I cryptates, [Ca^IICu₂^II(L ^tBu)₂(NO₃)₂(MeOH)₂] and [Na^ICu₂^II(L ^tBu)₂(Me₂CO)](BPh₄), have been synthesized and characterized in order to shed light on the essential role of Cu^II in the luminescence of a Eu^III cryptate. The unprecedented role of a Cu^II cryptand makes it possible to produce lanthanide luminescence in a Eu^III cryptate complex and is successfully elucidated by comparison with the corresponding Ca^II and Na^I cryptates.     

Characterization of a mesophilic aliphatic-aromatic copolyester-degrading fungus

We isolated 5 mesophilic microorganisms that form clear zones around the colony on an opaque medium containing the aliphatic-aromatic copolyester poly(60 mol% butylene adipate-co-40 mol% butylene terephthalate) (PBAT). Among all strains, the fungal strain NKCM1712 degraded PBAT at the fastest rate (3.5 ± 0.3 μg cm⁻² h⁻¹). Genetic and morphological analyses revealed that this strain was closely related to Isaria fumosorosea (phylum Ascomycota). Mass spectroscopic analysis revealed that the degradation products were T, AB, TB, BAB, and ABT (T, terephthalic acid unit; A, adipic acid unit; B, 1,4-butanediol unit)] in the culture of the strain that used PBAT as the sole carbon source. Furthermore, the PBAT degradation ability of this strain in terms of BOD suggested that it could utilize the PBAT degradation products as growth substrates. This is the first report of a mesophilic strain that can mineralize an aliphatic-aromatic polyester into carbon dioxide on its own.     

Progress in 13C and 1H solid-state nuclear magnetic resonance for paramagnetic systems under very fast magic angle spinning

High-resolution solid-state NMR (SSNMR) of paramagnetic systems has been largely unexplored because of various technical difficulties due to large hyperfine shifts, which have limited the success of previous studies through depressed sensitivity/resolution and lack of suitable assignment methods. Our group recently introduced an approach using "very fast" magic angle spinning (VFMAS) for SSNMR of paramagnetic systems, which opened an avenue toward routine analyses of small paramagnetic systems by (13)C and (1)H SSNMR [Y. Ishii et al., J. Am. Chem. Soc. 125, 3438 (2003); N. P. Wickramasinghe et al., ibid. 127, 5796 (2005)]. In this review, we discuss our recent progress in establishing this approach, which offers solutions to a series of problems associated with large hyperfine shifts. First, we demonstrate that MAS at a spinning speed of 20 kHz or higher greatly improves sensitivity and resolution in both (1)H and (13)C SSNMR for paramagnetic systems such as Cu(II)(DL-alanine)(2)H(2)O (Cu(DL-Ala)(2)) and Mn(acac)(3), for which the spectral dispersions due to (1)H hyperfine shifts reach 200 and 700 ppm, respectively. Then, we introduce polarization transfer methods from (1)H spins to (13)C spins with high-power cross polarization and dipolar insensitive nuclei enhanced by polarization transfer (INEPT) in order to attain further sensitivity enhancement and to correlate (1)H and (13)C spins in two-dimensional (2D) SSNMR for the paramagnetic systems. Comparison of (13)C VFMAS SSNMR spectra with (13)C solution NMR spectra revealed superior sensitivity in SSNMR for Cu(DL-Ala)(2), Cu(Gly)(2), and V(acac)(3). We discuss signal assignment methods using one-dimensional (1D) (13)C SSNMR (13)C-(1)H rotational echo double resonance (REDOR) and dipolar INEPT methods and 2D (13)C(1)H correlation SSNMR under VFMAS, which yield reliable assignments of (1)H and (13)C resonances for Cu(Ala-Thr). Based on the excellent sensitivity/resolution and signal assignments attained in the VFMAS approach, we discuss methods of elucidating multiple distance constraints in unlabeled paramagnetic systems by combing simple measurements of (13)C T(1) values and anisotropic hyperfine shifts. Comparison of experimental (13)C hyperfine shifts and ab initio calculated shifts for alpha- and beta-forms of Cu(8-quinolinol)(2) demonstrates that (13)C hyperfine shifts are parameters exceptionally sensitive to small structural difference between the two polymorphs. Finally, we discuss sensitivity enhancement with paramagnetic ion doping in (13)C SSNMR of nonparamagnetic proteins in microcrystals. Fast recycling with exceptionally short recycle delays matched to short (1)H T(1) of approximately 60 ms in the presence of Cu(II) doping accelerated 1D (13)C SSNMR for ubiquitin and lysozyme by a factor of 7.3-8.4 under fast MAS at a spinning speed of 40 kHz. It is likely that the VFMAS approach and use of paramagnetic interactions are applicable to a variety of paramagnetic systems and nonparamagnetic biomolecules.     

Gas chromatography of hydrocarbons using packed liquid chromatographic capillary columns

Capillary columns of 0.3-0.5 mm i.d. packed with 3- to 30-μm silica-based stationary phases for liquid chromatography were used for gas chromatographic separation of hydrocarbons. Column efficiencies were evaluated for various commercially available packing material. The best column efficiency was achieved with 5-μm octadecyl group bonded silica gel, the surface of which was coated with a poly (dimethylsiloxane) film. The 30-cm column produced 11,000 theoretical plates.     

Highly Isospecific Polymerization of Silyl‐Protected ω‐Alkenols Using an [OSSO]‐Type Bis(phenolato) Dichloro Zirconium(IV) Precatalyst

The coordination polymerization of silyl‐protected ω‐alkenols such as ω‐alken‐α‐oxytriisopropylsilanes 1 provides poly(ω‐alkenyl‐α‐oxytriisopropylsilalne)s with a highly isospecific microstructure ([mmmm] > 95%) when a combination of [OSSO]‐type bis(phenolato) dichloro zirconium(IV) complex 2 and dried methylaluminoxane is used as the precatalyst and activator, respectively. The resulting siloxy‐substituted polymers could be efficiently transformed into the corresponding functionalized polyolefins, which contained up to 90% acetyl groups and ≈7% hydroxy groups in the terminal side chains.

     

Detection of ethanol in human body fluids by headspace solid-phase micro extraction (SPME)/capillary gas chromatography

Summary Ethanol has been found extractable from human whole blood and urine samples by headspace solid-phase micro extraction (SPME) with a Carbowax/divinylbenzene-coated fiber. After heating a vial containing the body fluid sample with ethanol, and isobutanol as internal standard (IS) at 70°C in the presence of (NH₄)₂SO₄, a Carbowax/divinylbenzene-coated SPME fiber was exposed in the headspace of the vial to allow adsorption of the compounds. The fiber needle was then injected into a middle-bore capillary gas chromatography (GC) port. The headspace SPME-GC gave intense peaks for both compounds; a small amount of background noises appeared, but did not interfere with the detection of the compounds. Recoveries of ethanol and IS were 0.049 and 0.026% for whole blood, respectively, and 0.054 and 0.085% for urine, respectively. The calibration curves for ethanol showed excellent linearity in the range of 80–5000 mg L^–1 for whole blood and 40–5000 mg L^–1 for urine; the detection limits for both samples were 20 and 10 mg L^–1, respectively. The data on actual determination of ethanol after the drinking of beer are also presented for two subjects.     

Alkane Oxidation with Molecular Oxygen Using a New Efficient Catalytic System: N-Hydroxyphthalimide (NHPI) Combined with Co(acac)(n)() (n = 2 or 3)

A novel class of catalysts for alkane oxidation with molecular oxygen was examined. N-Hydroxyphthalimide (NHPI) combined with Co(acac)(n)() (n = 2 or 3) was found to be an efficient catalytic system for the aerobic oxidation of cycloalkanes and alkylbenzenes under mild conditions. Cycloalkanes were successfully oxidized with molecular oxygen in the presence of a catalytic amount of NHPI and Co(acac)(2) in acetic acid at 100 degrees C to give the corresponding cycloalkanones and dicarboxylic acids. Alkylbenzenes were also oxidized with dioxygen using this catalytic system. For example, toluene was converted into benzoic acid in excellent yield under these conditions. Ethyl- and butylbenzenes were selectively oxidized at their alpha-positions to form the corresponding ketones, acetophenone, and 1-phenyl-1-butanone, respectively, in good yields. A key intermediate in this oxidation is believed to be the phthalimide N-oxyl radical generated from NHPI and molecular oxygen using a Co(II) species. The isotope effect (k(H)/k(D)) in the oxidation of ethylbenzene and ethylbenzene-d(10) with dioxygen using NHPI/Co(acac)(2) was 3.8.     

Rhodium‐ and ruthenium‐complex‐catalyzed condensation of ferrocene‐containing dithiols and diols with diarylsilanes to give silaferrocenophanes and ferrocene polymers

1,1′‐Ferrocenedithiol reacts with di(4‐methoxyphenyl)silane, diphenylsilane, and di(4‐fluorophenyl)silane in the presence of RhCl(PPh₃)₃ catalyst to give mixtures of 2,2‐diaryl‐1,3‐dithia‐2‐sila[3]ferrocenophanes (1a–3a) and ? (Fc? S? SiAr₂? S) _n? (Fc = 1,1′‐ferrocenylene; 1b: Ar = C₆H₄OMe‐4; 2b: Ar = Ph; 3b: Ar = C₆H₄F‐4). The products are isolated and characterized by NMR spectroscopy and elemental analyses. The polymers 1b–3b, obtained from a toluene‐soluble fraction of the products, show GPC elution patterns corresponding to M_n values of 2700–4600 (polystyrene standards). The UV–vis spectra of the ferrocenophanes and polymers exhibit a d–d transition peak at about 440 nm, while the polymers show a π–π* transition peak at 320–330 nm. The cyclic voltammograms of 3a (Ar = C₆H₄F ? 4) and 3b show a reversible redox of the iron center at 0.27 V and 0.35 V (Ag⁺/Ag) respectively. Reaction of 1,1′‐ferrocenedimethanol with diphenylsilane in the presence of RuCl₂(PPh₃)₃ catalyst results in selective formation of 3,3‐diphenyl‐2,4‐dioxa‐3‐sila[5]ferrocenophane ( 4 ), whose structure was determined by X‐ray crystallography. Copyright © 2001 John Wiley & Sons, Ltd.