Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

Total synthesis of brevetoxin-B

Brevetoxin-B (BTX-B), produced by the red tide organism, Gymnodium breve Davis, is the first member of marine polycyclic ethers to be structurally elucidated and one of the most potent neurotoxins. The structural feature is a trans-fused polycyclic ether ring system with 23 stereocenters. Its unique, complex structure and potent biological activity have attracted the attention of synthetic organic chemists. Total synthesis of BTX-B has been accomplished via the coupling of the ABCDEFG and IJK-ring segments, each ether ring of which was stereoselectively and efficiently constructed on the basis of SmI2-induced intramolecular cyclization, 6-endo-cyclization of hydroxy epoxide, ring-closing olefin metathesis, and SmI2-induced intramolecular Reformatsky-type reaction. Several kinds of double reactions at the left and right sides were efficiently used through the synthesis.     

Ferroelectric phase transitions in Pb2xSn2(1-x)P2Se6 system

Heat capacities of the Pb_2xSn_2(1-x)P₂Se₆ crystals (x=0, 0.098, 0.251, 0.402 and 1.0) were measured using an adiabatic calorimeter at temperatures between 10 and 350 K. In the crystal of x=0, two heat capacity anomalies corresponding to the ferroelectric commensurate - intermediate incommensurate(C-IC) phase transition temperature T _i, and the incommensurate - paraelectric (IC-N) phase transition temperature T _c, were observed at 193.24±0.10 and 220.07±0.15 K, respectively. The phase transition temperatures decreased with an increase in Pb²⁺ concentration. The anomaly at Ti disappeared at x=0.251 in the mixed systems of the Pb_2xSn_2(1-x)P₂Se₆. In the crystal of Pb₂P₂Se₆ (x=1.0), no phase transition was observed. The normal heat capacities for the mixed crystals were determined by least squares fitting of the Debye and Einstein functions to the experimental data. The anomalous heat capacities gave the phase transition entropies of 8.5 and 1.5 J mol^-1 K^-1 for x=0. The large transition entropies are consistent with an order-disorder mechanism in the ferroelectric-paraelectric phase transitions in x=0. This revised version was published online in August 2006 with corrections to the Cover Date.     

Sodium and Calcium Laurylamidomethylsulfate: Aqueous Micellar Phases, Their Properties, and a Precipitate of Vesicles

A new anionic surfactant (M-LAMS) that is capable of forming intermolecular hydrogen bonds was investigated. Inverse solubilities of Na and Ca salts were found. Critical micelle concentration and aggregation behavior were determined by surface tension, light scattering, electric birefringence, and SANS measurements. It is found that the Na salt forms globular micelles while the Ca salt forms rodlike micelles. The phase behavior of the micellar solutions with increasing cosurfactant concentration was also studied. It is observed that 100 mM Na-LAMS solutions in the presence of 100 mM CaCl(2) undergo several phase transformations with increasing n-hexanol concentration. We found not only the expected micellar L(1) phase and a lamellar phase at concentrations quite low for this kind of system, but also a novel phase: At a cosurfactant/surfactant ratio x(C) of 1.2 a white precipitate is formed at the bottom of the sample. With increasing ratio x(C) the precipitate dissolves into a liquid crystalline L(alpha) phase that at x(C)=3.2 is transformed into an L(3) or sponge phase. Investigation by FF-TEM, light microscopy, and SANS shows that the precipitate consists of agglomerated polydisperse multilamellar vesicles. The vesicles consist of densely packed bilayers that contain little water. The bilayer thickness is about 20 ? and independent of its composition whereas the interlamellar distance is strikingly linked to concentrations of cosurfactant (surfactant/cosurfactant ratio) and electrolyte. With increasing cosurfactant content, the bilayers become less rigid and resulting thermal undulations force the membranes apart and weaken their interactions until a common L(alpha) phase is formed. This transition is an example of a bonding-nonbonding transition of membranes. Copyright 2001 Academic Press.     

Ruthenium-catalyzed carbonylative cycloaddition of alpha-keto lactones with alkenes or alkynes: the participation of an ester-carbonyl group in cycloaddition reactions as the two-atom assembling unit

The reaction of benzofuran-2,3-dione derivatives 1 with CO and alkenes (or alkynes) results in a carbonylative [2+2+1] cycloaddition in which the ester-carbonyl group is incorporated into a two-atom assembling unit to give spirolactone derivatives 2. This reaction provides the first example of an ester-carbonyl group participating in a carbonylative cycloaddition reaction.     

Adiabatic microcalorimeters for heat capacity measurement at low temperature

Technical problems in the design and construction of small sample adiabatic calorimeters are pointed out and solutions to them discussed. Two calorimeters constructed on the design principle are described with illustrative examples of data obtained with them. Hard and soft wares for fully automatic operation of the two calorimeters are described in some detail.     

Ferrocene-containing polymers. I. Radiation-induced polymerization of ferrocenylmethyl methacrylate

γ-Ray-induced polymerizations of ferrocenylmethyl methacrylate (FMMA) in crystalline and amorphous states were investigated with kinetical and ESR methods. In the crystalline state the polymerization of FMMA proceeded slowly and gave low-molecular-weight polymers, whereas in the amorphous state it proceeded rapidly and gave polymers of much higher molecular weight. Molecular weight distributions of these polymers were binodal. The temperature dependence and the dose-rate dependence of the polymerization rates were different between the two states. Wide-line nuclear magnetic resonance (NMR) spectra of the amorphous monomer suggested that the polymerization proceeded in a supercooled state. Electron spin resonance (ESR) spectra of γ-irradiated FMMA and 1,1′-ferrocenyl-di(methyl methacrylate) showed that ferrocene radicals and methacrylic radicals were formed simultaneously at low temperature; with increasing temperature the former radicals disappeared, whereas the latter changed into growing chain radicals. The yields of radicals were relatively low; this means that ferrocene groups in the monomers behave as a radiation energy absorber.     

Estimation of frequency- and time-dependence of polymer composite system by viscoelasticity in three dimensions

This paper is concerned with the comparison between mechanical properties of polymer composite system and those of each individual constituent. The comparison is mainly performed with respect to the viscoelastic Young's modulus and the relaxation Young's modulus. These mechanical constants may be obtained from the correspondence principle by applying the Laplace transform to the constitutive equation. The calculated results exhibit that the mechanical property of polymer composite system strongly depends on that of matrix with respect to frequency- and time-dependences. That is, as for the vibration and dynamic response in the steady state, the frequency-dependence of peak position about imaginary part of dynamic modulus of composite system is similar to that of matrix, while the magnitude of dynamic modulus depends on volume fraction of dispersed particles to total volume. As for the stress relaxation, the time-dependence of the relaxation Young's modulus of composite system resemble that of matrix each other, while the magnitude depends on the volume fraction of dispersed particles to total volume. This is due to the calculating condition that particle is assumed to be very rigid in comparison with matrix in this paper.