Visible light-responsive cell scaffolds with bilayer structures for single cell separation

Collagen is a major component of the extracellular matrix, and collagen gels have been used as cell scaffolds. We previously prepared gold nanoparticle (AuNP)-embedded collagen gels (AuCol) to serve as cell scaffolds that were sensitive to visible light. We performed single cell detachment from this cell scaffold using a microscope equipped with a laser irradiation system. In the present study, we adjusted hydrogel thickness and AuNP concentration in AuCol, with a goal of improving cell detachment efficiency. Thin hydrogels became blackened after the laser irradiation, and thick hydrogels with high AuNP concentrations were not permeable to the laser light. We, therefore, prepared bilayer gels, composed of AuCol as the upper layer and intact collagen gel (Col) as the bottom layer. These bilayer gels allowed more effective cell detachment, because they were thick and optically transparent. Our results indicated that an AuCol/Col ratio of 2 enabled the highest cell detachment efficiency. Essentially, no cell damage was observed in our system, suggesting that this is a cell-friendly single cell separation system.     

Heavily Doped and Highly Conductive Hierarchical Nanoporous Graphene for Electrochemical Hydrogen Production

Heavy chemical doping and high electrical conductivity are two key factors for metal‐free graphene electrocatalysts to realize superior catalytic performance toward hydrogen evolution. However, heavy chemical doping usually leads to the reduction of electrical conductivity because the catalytically active dopants give rise to additional electron scattering and hence increased electrical resistance. A hierarchical nanoporous graphene, which is comprised of heavily chemical doped domains and a highly conductive pure graphene substrate, is reported. The hierarchical nanoporous graphene can host a remarkably high concentration of N and S dopants up to 9.0 at % without sacrificing the excellent electrical conductivity of graphene. The combination of heavy chemical doping and high conductivity results in high catalytic activity toward electrochemical hydrogen production. This study has an important implication in developing multi‐functional electrocatalysts by 3D nanoarchitecture design.     

3,3-Dimethoxypropylsulfonyl Group: A new versatile protecting and activating group for amine synthesis

3,3-Dimethoxypropylsulfonyl (Dimps) chloride was prepared and used as a new versatile sulfonating agent for ammonia, primary and secondary amines to afford corresponding Dimps-amides in excellent yields. The resulting N-nonsubstituted and N-monosubstituted Dimps-amides, activated amines, were alkylated satisfactorily under new Mitsunobu conditions. The Dimps group was removed by treatment in aqueous solution under acidic followed by basic conditions. Furthermore, epilachnene, the defensive droplets from the Mexican bean beetle, Epilachna varivestis, was synthesized utilizing this Dimps methodology in short steps.     

Recent examples of the use of biocatalysts with high accessibility and availability in natural product synthesis

Utilization of biocatalysts with high accessibility and availability, which have recently been applied in the preparation of enantiomerically enriched starting materials and synthetic intermediates for natural product syntheses (mainly 2013–2017) are summarized in this review. The main contents are as follows: 1) recruitment of biocatalysts for the transformation of organic compounds; 2) special precautions for preparative-scale biocatalytic synthetic experiments; 3) asymmetric reduction of carbonyl substrates; 4) kinetic resolution of alcohol and carboxylate enantiomers; 5) desymmetrization of multifunctional alcohol and carboxylate substrates; and 6) recognition of remote and non-central chirality.     

Cyclic and linear amidine catalysts for the efficient synthesis of cyclic trithiocarbonates from carbon disulfide and episulfides under mild conditions

Cyclic and linear amidines effectively catalyzed the reaction of carbon disulfide and episulfides under mild conditions, such as ordinary pressure and ambient temperature, to give the corresponding cyclic trithiocarbonates in high yields.     

Salvaging Reactive Fullerenes from Soot by Exohedral Derivatization

The awesome allotropy of carbon yields innumerable topologically possible cage structures of molecular carbon. This field is also related to endohedral metallofullerenes constructed by metal‐atom encapsulation. Stable and soluble empty fullerenes and endohedral metallofullerenes are available in pure form in macroscopic amounts from carbon arc production or other physical processes followed by extraction and subsequent chromatographic separation. However, many other unidentified fullerene species, which must be reactive and insoluble in their pristine forms, remain in soot. These “missing” species must have extremely small HOMO–LUMO gaps and may have unconventional cage structures. Recent progress in this field has demonstrated that reactive fullerenes can be salvaged by exohedral derivatization, which can stabilize the reactive carbon cages. This concept provides a means of preparing macroscopic amounts of unconventional fullerenes as their derivatives.     

Directing Aluminum Atoms into Energetically Favorable Tetrahedral Sites in a Zeolite Framework by Using Organic Structure‐Directing Agents

The Al location in zeolites can have massive influences on the zeolite properties because it directly correlates with the cationic active sites. Herein, the synthesis of IFR zeolites with controlled Al distribution at different tetrahedral sites (T sites) is reported. The computational calculations suggest that organic structure‐directing agents (OSDAs) used for zeolite synthesis can alter the energetically favorable T sites for Al. Zeolite products synthesized under identical conditions but with different OSDAs are found to have altered fractions of Al at different T sites in accordance with the energies derived from the zeolite–OSDA complexes. Our finding thus provides evidence for the ability of OSDAs to direct Al into more energetically favorable T sites, thereby offering rational synthetic guidelines for the selective placement of Al into specific crystallographic sites.     

Amphiphilic block and statistical copolymers with pendant glucose residues: Controlled synthesis by living cationic polymerization and the effect of copolymer architecture on their properties

Amphiphilic block and statistical copolymers of vinyl ethers (VEs) with pendant glucose residues were synthesized by the living cationic polymerization of isobutyl VE (IBVE) and a VE carrying 1,2:5,6‐di‐O‐isopropylidene‐D ‐glucose (IpGlcVE), followed by deprotection. The block copolymer was prepared by a two‐stage sequential block copolymerization, whereas the statistical copolymer was obtained by the copolymerization of a mixture of the two monomers. The monomer reactivity ratios estimated with the statistical copolymerization were r₁ (IBVE) = 1.65 and r₂ (IpGlcVE) = 1.15. The obtained statistical copolymers were nearly uniform with the comonomer composition along the main chain. Both the block and statistical copolymers had narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ∼ 1.1). Gel permeation chromatography, static light scattering, and spin–lattice relaxation time measurements in a selective solvent revealed that the block copolymer formed multimolecular micelles, possibly with a hydrophobic poly(IBVE) core and a glucose‐carrying poly(VE) shell, whereas the statistical copolymer with nearly the same molecular weight and segment composition was molecularly dispersed in solution. The surface properties of the solvent‐cast films of the block and statistical copolymer were also investigated with the contact‐angle measurement. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 459–467, 2001     

Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001     

Substituent effect on the cationic ring‐opening polymerization of acyloxymethyl five‐member cyclic dithiocarbonates

Five‐member cyclic dithiocarbonates were synthesized by the reactions of carbon disulfide with benzoic, p‐anisic, p‐chlorobenzoic, 1‐naphthalenecarboxylic, p‐nitrobenzoic, and p‐(tert‐butyl)benzoic glycidyl esters, and their cationic ring‐opening polymerizations were carried out with methyl trifluoromethane sulfonate and trifluoromethane sulfonic acid as initiators at room temperature to 80 °C. Polymers with number‐average molecular weights of 3400–24,900 were obtained in high yields, and their structures were estimated by NMR and IR spectroscopy. The monomers showed a clear difference in the polymerization rate according to the substituents. The rate of polymerization decreased in the order of p‐chlorobenzoic ≥ benzoic > 1‐naphthalenecarboxylic > p‐nitro‐benzoic > p‐tert‐butylbenzoic > p‐anisic. The data of the reaction kinetics, NMR studies, and molecular orbital calculations proved a plausible mechanism involving the participation of p‐substituted benzoyloxymethyl groups to stabilize the cationic propagating end. The polymers showed decomposition temperatures with 5% weight loss ranging from 200 to 260 °C. No glass‐transition temperatures for the polymers were observed below 200 °C by differential scanning calorimetry. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3967–3980, 2001