Emulsifier-free emulsion polymerization of tetrafluoroethylene by radiation. I. Effects of reaction conditions on the polymerization rate and polymer molecular weight

The radiation-induced emulsifier-free emulsion polymerization of tetrafluoroethylene was carried out at an initial pressure of 2–25 kg/cm², temperature of 30–110°C, and under a dose rate of 0.57 × 10⁴?3.0 × 10⁴ rad/hr. The rate of polymerization was shown to be proportional to 1.0 and 1.3 powers of the dose rate and initial pressure, respectively, and is maximal at about 70°C. The molecular weight of polytetrafluoroethylene (PTFE) lies in the range of 10⁵?10⁶, increases with reaction time in the early stage of polymerization, and is maximal at 70°C but is almost independent of the dose rate. An interesting discovery is that PTFE, a hydrophobic polymer, forms as a stable latex in the absence of emulsifier. When PTFE latex coagulates during polymerization under certain conditions, the polymerization rate decreases, probably because polymerization proceeds mainly on the polymer particle surface. The observed rate acceleration and successive increase in polymer molecular weight may be due to slow termination of propagating radicals in the rigid PTFE particles.     

Cationic ring‐opening polymerization of monothiocarbonate with a norbornene group

This work deals with the cationic ring‐opening polymerization of cyclic thiocarbonates with a norbornene or norbornane moiety, that is, 5,5‐(bicyclo[2.2.1]hept‐2‐ene‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC1 ) or 5,5‐(bicyclo[2.2.1]heptane‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC2 ), respectively. The reaction of TC1 initiated by trifluoromethanesulfonic acid (TfOH), methyl trifluoromethanesulfonate (TfOMe), boron trifluoride etherate (BF₃OEt₂), or triethyloxonium tetrafluoroborate (Et₃OBF₄) afforded unidentified products; however, TC1 underwent cationic ring‐opening polymerization with methyl iodide as an initiator to afford polythiocarbonate because the propagating end was stabilized by the covalent‐bonding property. The polymerization of TC2 initiated by TfOH, TfOMe, BF₃OEt₂, or Et₃OBF₄ afforded polythiocarbonate with good solubility in common organic solvents and a narrow molecular weight distribution because of the absence of a double‐bond moiety. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1698–1705, 2002     

X-ray gated Mössbauer spectroscopic studies on57Co-labelled cobalt/II/ fluoride

KX-ray-gated emission Mössbauer spectra of⁵⁷Co-labelled CoF₂ and CoF₂.2H₂O were measured at room temperature, using the coincidence technique. A difference was found in the relative intensity of⁵⁷Fe(II)/⁵⁷Fe(III) between the X-ray-gated and non-gated emission spectra. The results are explained in terms of local radiolytic effects of water of crystallization and the chemical effects associated with the de-excitation processes caused by EC-decay.     

Synthesis of [5'-13C]ribonucleosides and 2'-deoxy[5'-13C]ribonucleosides

The present efficient synthesis of [5'-13C]ribonucleosides and 2'-deoxy[5'-13C]ribonucleosides is characterized by the synthesis of the D-[5-13C]ribose derivative as an intermediate via the Wittig reaction of 4-aldehydo-D-erythrose dialkyl acetals with Ph3P13CH3I-BuLi to introduce the 13C label at the 5-position of a pentose. This was followed by the highly diastereoselective osmium dihydroxylation for the preparation of 2,3-di-O-benzyl-D-[5-13C]ribose dialkyl acetal and the cyclization from D-[5-13C]ribose dialkyl acetal derivatives to the alkyl D-[5-13C]ribofuranoside derivative by the use of LiBF(4). The obtained D-[5-13C]ribose derivative was converted into [5'-13C]ribonucleosides and subsequently into the corresponding 2'-deoxynucleosides.     

Effect of boron non-stoichiometry on B-site in perovskite type structure ScBxRh3 and CeBxRh3 on charges of atoms on A-site: study by X-ray photoelectron and nuclear magnetic resonance spectroscopies

The solid solutions of ScBRh₃-ScRh₃ and CeBRh₃-CeRh₃ are synthesized by the arc melting method, where RBRh₃ and RRh₃ (R=rare earth element) have perovskite and AuCu₃ type structures, respectively. The binding energy of Sc 2p_3/2 for ScB_xRh₃ increases with the boron concentration. The Knight shift of ⁴⁵Sc observed by nuclear magnetic resonance spectroscopy decreases with increase of boron concentration. The decrement of the Knight shift corresponds the Sc 4s electron density at the Fermi level. The intensity ratio of f²: f¹: f⁰ of Ce 3d XPS spectrum changes with boron concentration of CeB_xRh₃. It is concluded that in both cases of ScB_xRh₃ and CeB_xRh₃ the charge on the atoms on A-site changes with the concentration of the atoms on B-site, where the atoms are not directly bound.     

Simultaneous liquid chromatographic determination of 39 polycyclic aromatic hydrocarbons in indoor and outdoor air and application to a survey on indoor air pollution in Fuji, Japan

An analytical method was established for the simultaneous determination of 39 polycyclic aromatic hydrocarbons (PAHs) in air. The method was applied to a survey of gaseous and particulate PAHs in household indoor air. The survey was performed in 21 houses in the summer of 1999 and in 20 houses in the winter of 1999-2000 in Fuji, Japan. Thirty-eight PAHs were determined in indoor and outdoor air in the summer, and 39 PAHs were determined in indoor and outdoor air in the winter. The concentrations of gaseous PAHs in indoor air tended to be higher than those in outdoor air in the summer and winter. The concentrations of particulate PAHs in indoor air were the same as or lower than those in outdoor air in the summer and winter. PAH profiles, correlations between PAH concentrations, and multiple regression analysis were used to determine the factors affecting the indoor PAH concentrations. These results showed that gaseous PAHs in indoor air were primarily from indoor emission sources, especially during the summer, and that indoor particulate PAH concentrations were significantly influenced by outdoor air pollution.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Effect of the mobility of ligands in polyrotaxanes on order structure of water clusters

The effect of the mobility of ligands (maltose groups) in the polyrotaxanes (pRXs) on the structure of the surrounding water molecules was investigated. Raman spectra of collective OH stretching vibration of water molecules in aqueous solutions of maltose-pRX conjugates with different alpha-cyclodextrin (alpha-CD) threading on a poly(ethylene glycol) (PEG) chain was measured. The mobility of maltose groups was estimated by measuring the relaxation time T2 of the C1 protons in maltose groups bound on alpha-CD by NMR experiment. A positive correlation between the Raman intensity of the collective band and the relaxation time T2 was obtained. This result indicates that the degree of order of the water clusters is higher as the mobility of maltose groups increases in these conjugate solutions. It is suggested that rapid motion of maltose groups in the pRX conjugate can contribute to preserving ordered structure of the bulk water clusters.     

1H-NMR Relaxation of Water Molecules in the Aqueous Microcrystalline Cellulose Suspension Systems and Their Viscosity

An intensive study for aqueous microcrystalline cellulose (MCC) suspensions was carried out in view of the relationship between a viscosity and a 1H spin-spin relaxation time (T2) of water. An investigation was carried out for four suspension systems with the different particle size distributions. The proton mole ratio () of bound water against MCC particles and T2 of bound water (T2,b) were evaluated from the T2 values obtained by Carr-Purcell- Meiboom-Gill (C.P.M.G) method and those by solid echo method, respectively. As a result of these analyses, the T2,b value for the aqueous MCC suspension was evaluated as 5 × 10–3 s and it was found that the system having a larger tended to show a higher viscosity. By relating the above results to the observation of the suspensions by an optical microscope, it was concluded that a network formed by MCC particles plays an important role in generating a high viscosity of MCC suspension, and that an averaged mobility of water molecules is sensitively affected by the network structure.     

Multiresolution quantum chemistry in multiwavelet bases: Hartree-Fock exchange

In a previous study we reported an efficient, accurate multiresolution solver for the Kohn-Sham self-consisitent field (KS-SCF) method for general polyatomic molecules. This study presents an efficient numerical algorithm to evalute Hartree-Fock (HF) exchange in the multiresolution SCF method to solve the HF equations. The algorithm employs fast integral convolution with the Poission kernel in the nonstandard form, screening the sparse multiwavelet representation to compute results of the integral operator only where required by the nonlocal exchange operator. Localized molecular obitals are used to attain near linear scaling. Results for atoms and molecules demonstrate reliable precision and speed. Calculations for small water clusters demonstrate a total cost to compute the HF exchange potential for all n(occ) occpuied MOs scaling as O(n(occ) (1.5)).