Incorporation of lipid domains in Cerasome, a morphologically-stable organic-inorganic vesicular nanohybrid

To extend the concept of the Cerasome, an organic-inorganic vesicular nanohybrid, this paper investigates the preparation and characterization of a “mixed” Cerasome. The system consists of a Cerasome-forming lipid 1, a cationic synthetic lipid 2, and a zwitterionic phospholipid 3. Lipid mixtures of 1 and 2 or 1 and 3 were used to prepare the mixed Cerasomes. Their lipid distributions were examined using differential scanning calorimetry (DSC), which showed that 1 and 2 (or 1 and 3) were phase-separated in the mixed Cerasomes. These results seem to be mainly attributable to the polymerizable nature of 1. Results of scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDX) showed that 1 and 3 were both incorporated into a single Cerasome, not macroscopically separated to form separate vesicles from each lipid component. Mixed Cerasomes of 1 and 2 showed high morphological stability against a membrane-solubilizing surfactant, incorporating up to 70% of 2. On the other hand, the mixed Cerasomes from 1 and 3 were less stable than the mixed Cerasomes from 1 and 2. This relative instability might be attributable to differences between the mixed Cerasomes from 1 and 2 and 1 and 3 in terms of their vesicular sizes, lipid domain sizes, and their relative effectiveness for siloxane network formation. These results strongly support the formation of mixed Cerasomes that have lipid domains in-plane. Systems described in this study are useful to prepare variously mixed Cerasomes that have different surface functionalities and in-plane lipid distribution, but which have high morphological stability.     

Cationic ring-opening transfer polymerization of spiro ortho esters initiated by carbon black

The ring-opening transfer polymerization of spiro ortho esters (SOE) initiated by carbon black was investigated. In the absence of carbon black, no polymerization occurred at all. In the presence of channel black containing carboxyl group, the ring-opening transfer polymerization of SOE was initiated at 50-70°C. to give polyether ester, namely alternating copolymer of epoxide and lactone. The rate of polymerization of 1,4,6-trioxaspiro[4.4]nonane and 1,4,6-trioxaspiro[4.5]decane was considerably small compared with that of 1,4,6-trioxaspiro[4.6]undecane. The activation energy of the polymerization of 2-chloromethyl-1,4,6-trioxaspiro[4.6]undecane was estimated to be 6.0 kcal/mol. The initiating activity of carbon black increased with an increase in carboxyl group content of carbon black. Furnace black that contained no carboxyl group was unable to initiate the polymerization. Furthermore, the carbon black lost the initiating ability of the polymerization upon the blocking of carboxyl group on the surface by the treatment with potassium hydroxide or diazomethane. Based on these results, it was concluded that carboxyl group on carbon black plays an important role in the initiation. During the polymerization, a part of the polymer formed was grafted onto carbon black: the grafting ratio was 10–30%. The mechanisms of initiation and grafting were discussed.     

Synthesis of a novel bridged nucleoside bearing a fused-azetidine ring, 3′-amino-3′,4′-BNA monomer

A novel bridged nucleic acid monomer, 3′-amino-3′-deoxy-5-methyl-3′-N,4′-C-methyleneuridine, was successfully synthesized via a useful and convenient azetidine ring formation under Staudinger's conditions. A ¹H NMR experiment and a PM3 calculation revealed that the sugar moiety of the novel bridged nucleic acid monomer, 3′-amino-3′,4′-BNA, was restricted to S-type conformation.     

Preparation of enol ethers by carbonyl olefination utilizing an alkoxymethyl chloride-titanocene(II) system

Aldehydes, ketones, esters and lactones are transformed into enol ethers or 1,2-dialkoxy-1-alkenes by treatment with organotitanium species prepared from alkoxymethyl chlorides and a titanocene(II) complex.     

A novel scheme of heterogeneous polymerization of ethylene

The heterogeneous polymerization of ethylene initiated by radiation in tert-butyl alcohol was studied. The polymerization was carried out in a 100-ml reactor at 25–100°C and pressures of 200–300 kg/cm² in the presence of 50 ml of tert-butyl alcohol containing 7 wt-% water. The amounts of polymerized monomer, the average molecular weight of polymer formed, and the molecular weight distribution of polymer were measured at various stages of reaction and at various temperatures. The molecular weight distribution was found to be very much dependent on the reaction time and temperature. For the polymer formed at 50–60°C in the very early stages of reaction, the molecular weight distribution is unimodal, and in the intermediate stage a shoulder appears at a molecular weight higher than the first peak which increases as the polymerization proceeds; eventually a bimodal curve is formed. The bimodal distribution curves were analyzed to determine the fractions and average molecular weights of the each peak. On the basis of these data for the molecular weight distribution and kinetic behavior, a new scheme for the heterogeneous polymerization is proposed which indicates that the polymerization proceeds via propagating radicals in two different physical states, namely, loose and rigid states.     

Synthetic studies on (+)-aplasmomycin. 1. Stereoselective synthesis of the C-12˜C-17 segment

The C-12˜C-17 segment of (+)-aplasmomycin ( ) was synthesized stereoselectively starting from (−)-malic acid based on the stereoselective ketone reduction.     

Hydrogen evolution from water by use of viologen polymers as electron transfer catalyst

The behavior of viologen polymer (P-V²⁺) as an electron transfer catalyst in the reaction of hydrogen generation was studied. In the photoirradiation system, which contains triethanolamine (TEA), Ru(bpy)³⁺₃, and P-V²⁺, the amount of hydrogen evolution was less than methyl viologen (MV²⁺); P-V²⁺, however, was more effective in sodium dithionite as the electron donor and showed higher initial rates than MV²⁺.     

Proposed mechanism for the reaction catalyzed by a diterpene cyclase,aphidicolan-16beta-ol synthase: experimental results on biomimetic cyclization and examination of the cyclization pathway by ab initio calculations

To examine the mechanism of the cyclization reaction catalyzed by aphidicolan-16beta-ol synthase (ACS), which is a key enzyme in the biosynthesis of diterpene aphidicolin, a specific inhibitor of DNA polymerase alpha, skeletal rearrangement of 2a and biomimetic cyclization of 4b were employed. The structures of the reaction products, which reflect penultimate cation intermediates, allowed us to propose a detailed reaction pathway for the Lewis acid-catalyzed cyclizations and rearrangements. Isolation of these products in an aphidicolin-producing fungus led us to speculate that the mechanism of the ACS-catalyzed cyclization reaction is the same as that of a nonenzymatic reaction. Ab initio calculations of the acid-catalyzed reaction intermediates and the transition states indicate that the overall reaction catalyzed by ACS is an exothermic process though the reaction proceeds via an energetically disfavored secondary cation-like transition state. In conjunction with the solvent effect in the acid-catalyzed reactions, this indicates that the actual role of ACS is to provide a template which enforces conformations of the intermediate cations leading to the productive cyclization although it has been believed that the cation-pi interaction between cation intermediates and aromatic amino acid residues in the active site is important for the enzymatic catalysis. This study provided important information on the role of various cationic species, especially secondary cation-like structures, in both nonenzymatic and enzymatic reactions.     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.