Synthesis of copolymers containing a spiro orthocarbonate moiety and evaluation of the volume change during their cationic crosslinking

Spiro orthocarbonate (SOC) monomers having either an exomethylene group {3,3‐dimethyl‐9‐methylene‐1,5,7,11‐tetraoxaspiro[5.5]undecane (ExoSOC)} or an allyl group {9‐allyl‐3,3‐dimethyl‐1,5,7,11‐tetraoxaspiro[5.5]undecane (AllylSOC)} were radically copolymerized with vinyl monomers at several feed ratios to obtain the corresponding copolymers having SOC moieties in the side chain. The obtained copolymers were crosslinked via the double ring‐opening polymerization of the SOC moieties by a treatment with boron trifluoride etherate. The volume changes during the crosslinking of the copolymers were evaluated by density measurements with a gas pycnometer. As the SOC moiety composition increased, the volume shrinkage during the crosslinking was suppressed, and that finally changed into volume expansion. The volume changes during the crosslinking of the copolymers from AllylSOC were slightly larger than those of the copolymers from ExoSOC. The higher volume expansions in the crosslinking of AllylSOC‐based copolymers were ascribable to the lower steric hindrance around the SOC moieties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7040–7053, 2006     

Encapsulation of ZnS:Mn2+ nanocrystals with diblock copolymers

The encapsulation of the nanocrystalline manganese‐doped zinc sulfide (ZnS:Mn) in poly(styrene‐b‐2vinylpyridine) (PS‐PVP) diblock copolymers is reported. Below the critical micelle concentration in the absence of nanocrystals (NCs), inverse micelles of PS‐PVP were induced by adding ZnS:Mn NCs, the presence of which was confirmed by scanning force microscope and dynamic light scattering. In toluene, a PS‐selective solvent, the less‐soluble PVP blocks preferentially surround the ligand‐coated ZnS:Mn NCs. For PS‐PVP encapsulated ZnS:Mn NCs, the ratio of blue emission to orange emission of ZnS:Mn NCs is dependent on both the concentration of PS‐PVP and the solvent quality. The pyridine of PVP blocks form complexes with the Zn atoms via the nitrogen lone pair and thus the sulfur vacancies are passivated. As a result, the defect‐related blue emission is selectively quenched even when the micelles are not formed. As the concentration of PS‐PVP encapsulating the ZnS:Mn NCs increases, the intensity of blue emission decreases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3227–3233, 2006     

Determination of hexabromocyclododecane diastereoisomers and tetrabromobisphenol A in water and sediment by liquid chromatography/mass spectrometry.

A method to determine alpha-, beta- and gamma-hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA) in water and sediments was presented using solid phase extraction (SPE) and/or solvent extraction. Recoveries from sediments were approximately 100% for all the chemicals, while recoveries of alpha-, beta- and gamma-HBCDs from water were dependent on the extraction method. In the case of dichloromethane (CH2Cl2) extraction, recoveries of alpha-, beta- and gamma-HBCD from landfill leachates were 77%, 88% and 92%, respectively. Technical difficulties in HBCD measurement are discussed in terms of the physico-chemical properties of HBCD isomers. The method was applied to landfill samples and marine sediment.     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Polyamine polymers from active hydrogen compounds,formaldehyde, and amines

Active hydrogen compounds such as hydroquinone (HQ), cyclohexanone (CH), acetophenone (AP), and 4,4′-methylene bis-N-methylaniline (MNA) polymerized with formaldehyde (F) and secondary diamines to produce Mannich base polyamine polymers. The HQ-containing polymers were oxidized to benzoquinone (BQ)-containing polymers and their redox properties were investigated in the desulfurization of hydrogen sulfide.     

3-Aroylmethyl derivatives of 2(1H)quinoxalinone and 2H-l,4-benzoxazin-2-ones existing in the enamine form

Seventeen derivatives of 2(1H)quinoxalinone and 2H-l,4-benzoxazin-2-one have been synthesized for structural study. All of the compounds having a substituted phenacyl, isonicotinoylmethyl, or 2-furoylmethyl side chain are shown to exist in the enamine form with an internal chelation both in the crystalline and solution states as evidenced by the ir and pmr spectra, respectively. In the gas phase, however, o-hydroxyphenacyl derivatives can exist in another type of intramolecularly hydrogen-bonded form which is supported by their mass spectra.