A catalytic immuno-reactor for the amperometric determination of human serum albumin

A catalytic immuno-reactor for the determination of human serum albumin (HSA) was constructed by using immobilized antibody and an amperometric detector. A sandwich assay with hemin-labeled antibody to catalyze the decomposition of hydrogen peroxide was used, the catalytic activity of the hemin-antibody conjugate being determined by measuring the decrease in hydrogen peroxide concentration. The reaction of hemin-labeled antibody with antigen was complete within 30 min and the current decrease was correlated with the HSA concentration. The relative standard deviation was about 9% at an HSA concentration of 1 mg ml^?1.     

Generation and characterization of electrons from a gas target irradiated by high-peak-power lasers

We present the results of electron generation experiments conducted at the Advanced Photon Research Center, Japan Atomic Energy Research Institute, using 23-fs relativistically intense 20-TW tightly focused laser pulses with underdense plasma. We observed electron energies up to 40 MeV characterized by a two-temperature Maxwell distribution. With the help of particle-in-cell simulations, we found that these are due to different plasma wave-breaking processes. A charge of 5 nC/shot was obtained at a small solid angle, which corresponds to high peak current generation.     

Surface grafting of polyethylene by mutual irradiation in methyl acrylate vapor. IV. Kinetic analysis by quartz helix microbalances

A detailed kinetic study of the γ-ray-induced surface grafting of methyl acrylate (MA) onto polyethylene (PE) has been investigated by using quartz helix microbalances. Under typical graft conditions, the grafting rate increases, levels off, and then accelerates with irradiation time; i.e., the typical growth process of the surface grafting consists of an initial stage having an increasing rate of grafting, an intermediate stage having a constant rate, and an advanced stage having an accelerated rate. A homopolymer layer (consisting only of an MA component) begins to be formed on the inner graft copolymer layer (consisting both of MA and PE components) at the transition zone in grafting rate after a duration of a constant rate of grafting. Therefore, the increasing rate in increasing rate in the intial stage of grafting reflects the graft copolymerization in the graft copolymer layer (inside the PE sheet), and the increasing rate in the advanced stage reflects the growth of the homopolymer layer. Under grafting reflects the graft tage reflects the growth of the homopolymer layer. Under grafting conditions by which the homolymer layer is not formed throughout the whole grafting process, the surface grafting remains remains in the initial stage. On the order hand, under grafting conditions by which the homopolymer layer begins to be formed from an early stage of grafting, the surface grafting proceeds rapidly from the initial stage to the advanced stage and thus skips the intermediate stage.     

Surface grafting of polyethylene by mutual irradiation in methyl acrylate vapor. I. γ irradiation

Mutual irradiation of polyethylene (PE) in methyl acrylate vapor easily forms a poly(methyl acrylate) (PMA) homopolymer layer on the inner graft copolymer layer consisting of both PE and PMA components as a result of the rapidly increasing surface-graft composition. This growth process of surface grafting has been found to provide some specific kinetic features different from those in other surface-grafting systems. With formation of the surface homopolymer layer, low- and highdensity PE sheets give the same grafting rate, whereas both sheets give different rates in grafting stages or conditions in which the homopolymer layer is not formed. This result indicates that most monomers, penetrating across the surface, are entrapped or consumed in the surface homopolymer layer; accordingly the rate becomes independent of the type of PE sheets that have significantly different diffusion coefficients. The thickness of the inner graft copolymer layer, which is kept constant after homopolymer-layer formation, increases with decreasing dose rate and with increasing monomer vapor pressure and temperature. This behavior can be qualitatively explained according to an equation for the initial steady-state grafting depth.     

Reaction of calcium and phosphate ions with titanium,zirconium, niobium,and tantalum

To understand the bone formation ability of constituent metal elements of new titanium alloys, titanium, zirconium, niobium, and tantalum, these metals were immersed in various electrolytes containing calcium and/or phosphate ions and characterized using X‐ray photoelectron spectroscopy. In addition, cathodic polarization of the metals in the electrolytes was performed to evaluate the stability of the surface oxide films on the metals in the electrolyte. The calcium phosphate layer formed on Ti in electrolytes containing calcium and phosphate ions is relatively protective against mass transfer throughout the layer. However, the zirconium phosphate layer formed on Zr is much more protective and stable than that on Ti. Therefore, calcium ions were not incorporated. Nb and Ta formed calcium phosphate, but the amount was smaller than that in Ti, because phosphates formed on Nb and Ta are somewhat protective and the incorporation of the calcium ion is inhibited. Titanium played the most important role in forming calcium phosphate, while zirconium inhibited the formation of calcium phosphate on titanium alloys. The control of bone formation is feasible by the design of titanium alloys. Copyright © 2015 John Wiley & Sons, Ltd.     

The development of a knowledge base for basic active structures: an example case of dopamine agonists

Background  

Chemical compounds affecting a bioactivity can usually be classified into several groups, each of which shares a characteristic substructure. We call these substructures "basic active structures" or BASs. The extraction of BASs is challenging when the database of compounds contains a variety of skeletons. Data mining technology, associated with the work of chemists, has enabled the systematic elaboration of BASs.