Changes of electrochemical responses of the bulk solution species by thermotropic permeability of liquid crystalline membranes coated on electrodes

Liquid crystalline/polymer composite membrane-coated electrodes were prepared by casting a 1,2-dichloroethane solution of N-(4-ethoxybenzylidene)-4′-n-butylaniline (EBBA) and polycarbonate (PC) on an electrode surface. The temperature-dependence of the permeability of the EBBA/PC composite membrane on electrodes to Fe(CN)^3?₆ ion as a solution-phase redox ion was investigated by means of hydrodynamic voltammetry at a rotating disk electrode. The permeability changed with temperature over the range of the crystalline-nematic-phase transition temperature of EBBA. It is demonstrated that the observed temperature-dependence of the permeability reflects the thermotropic properties of EBBA in the EBBA/PC composite membrane. Furthermore, the dependence of the limiting current of the steady-state current-potential curves for the reduction of Fe(CN)^—₆ at the EBBA/PC composite membrane-coated electrode upon the membrane thickness, the blend ratio of EBBA and PC and the concentration of Fe(CN)^3?₆ in a bulk solution was examined in order to understand the transport process of Fe(CN)^?3₆ through the EBBA/PC composite membrane from the membrane/solution interface to the electrode/membrane interface. The transport process of Fe(CN)^3?₆ within the membrane was found to obey Fick's Law.     

聚酚藏花红功能碳纳米管生物阳极制备及其在乙醇传感器应用

应用电化学法聚合酚藏花红（PPS）功能化的单壁碳纳米管,以其作为烟酰胺辅酶（NADH）氧化的电化学催化剂（电极）,构建基于乙醇脱氢酶的安培型乙醇生物电化学传感器.该电极于0.0 V时,对NADH具有很好的催化性能.而单体酚藏花红则由于其电位过低（-0.48 V）,不能显示催化性能.循环伏安和计时安培法测试表明：该传感器...     

电化学氧化增强金属钴卟啉的自组装研究

应用电化学方法将钴(Ⅱ)卟啉氧化成钴(Ⅲ)卟啉以增强它与4-巯基吡啶(MP)自组装膜的轴向配位作用,从而快速制备了有序钴卟啉自组装修饰电极CoTMPP/MP/Au(E).电化学石英晶体微天平(EQCM)测试证实电化学氧化对钴卟啉膜生长过程的增强作用.Ram an光谱及修饰电极电催化还原氧研究显示,该修饰电极与经过长时间浸渍法得到的CoTMPP/MP/Au(I)修饰电极具有完全相似的有序结构和性质.与直接将钴卟啉吸附在电极表面的CoTMPP/Au修饰电极相比,以巯基吡啶为桥键得到的钴卟啉修饰电极具有更好的电催化活性和稳定性.     

Effects of Al concentration and resulting long-period superstructures on the plastic properties at room temperature of Al-rich TiAl single crystals

The role of Al₅Ti₃ and h-Al₂Ti long-period superstructures on the plastic properties of TiAl at room temperature is investigated on five single crystals with aluminium content comprised between 54.7 at.%, and 62.5 at.%. After annealing at 1200°C for 1?h, the Al₅Ti₃ superstructure develops in the L1₀ (γ) matrix upon increasing Al concentration except for Ti–62.5 at.%Al where h-Al₂Ti substitutes for Al₅Ti₃. The CRSS for <110]{111} first increases abruptly with the development of the Al₅Ti₃-type ordering. Then, the CRSS reaches a plateau at which dislocations assemble in groups of four to prevent extra anti-phase boundary (APB) from being engendered during glide throughout the Al₅Ti₃ phase. In Ti–62.5 at.%Al, the CRSS for ordinary slip further increases upon the precipitation of h-Al₂Ti in the L1₀ phase, whereas it decreases when the crystal is fully transformed into single-phased Al₅Ti₃. <101] superlattice dislocations are primarily activated under both the [210] and [1?1?8.6] load orientations irrespective of the Al concentration, but the dislocation microstructure strongly depends on orientation as well as on the degree of Al₅Ti₃ ordering. In the [210] orientation, the frequency of the decomposition of <101] dislocations into 1/2<110] and 1/2<112] dislocations decreases abruptly with the development of Al₅Ti₃. This is interpreted in terms of the increased difficulty to move ordinary dislocations. Under the [1?1?8.6] orientation, the density of faulted dipoles diminishes remarkably with the development of Al₅Ti₃. This is consistent with the transformation of the low energy extrinsic stacking fault of the L1₀ phase into a higher energy complex extrinsic stacking fault.     

Multinuclear cobalt–salen complexes with phenylene linker for epoxide polymerizations

Di‐ and trinuclear cobalt (Co)–salen complexes with a benzene ring as a rigid linker were explored for epoxide polymerizations. The dinuclear Co–salen complex with a 1,2‐phenylene linker showed higher catalytic activity than the dinuclear Co–salen complex with a 1,3‐phenylene linker and the trinuclear Co–salen complex with a 1,3,5‐benzenetriyl linker for the copolymerization of propylene oxide (PO) with carbon dioxide. A combination of the absolute configuration of the two Co–salen moieties was found to affect its catalytic activity. The optimized dinuclear Co–salen complex with a heterochiral combination demonstrated highest activity and maintained its catalytic activity under a low catalyst concentration. The heterochiral dinuclear Co–salen complex also showed high activity for the copolymerization of PO with cyclic anhydride. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2150–2159     

Representation type of Hecke algebras of type

In this paper we provide a complete classification of the representation type for the blocks for the Hecke algebra of type , stated in terms of combinatorical data. The computation of the complexity of Young modules is a key component in the proof of this classification result.     

Radical cascade reaction with 1,4-dienes and 1,4-enynes using 2-(iodomethyl)cyclopropane-1,1-dicarboxylate as a homoallyl radical precursor: one-step synthesis of bicyclo[3.3.0]octane derivatives

[reaction: see text] Radical cascade reaction with various 1,4-dienes and 1,4-enynes using dimethyl 2-(iodomethyl)cyclopropane-1,1-dicarboxylate as a homoallyl radical precursor smoothly proceeds through an iodine atom transfer mechanism to give functionalized bicyclo[3.3.0]octane derivatives in good yields.     

LET distributions from CR-39 plates on Space Shuttle missions STS-84 and STS-91 and a comparison of the results of the CR-39 plates with those of RRMD-II and RRMD-III telescopes

The LET distributions during the Space Shuttle missions STS-84 (altitude 270-412 km, average 375 km; inclination angle, 51.6 degrees) and STS-91 (altitude 328-397 km, average 373 km; inclination angle, 51.6 degrees) were measured using CR-39 plastic nuclear track detectors. A correction for the dip-angle dependence of the track-formation sensitivity of the CR-39 plates was applied to the data analysis. The absorbed doses and the dose equivalents around RRMD Detector Units, estimated from the LET distributions in the LET region of 4-200 keV/micrometers, fluctuated with standard deviations of +/- 21% to +/- 35% in both flight experiments. The LET distributions obtained from the CR-39 plates agreed well with that obtained from RRMD-II in STS-91. However, the particle fluxes obtained from RRMD-III in STS-84 and STS-91 were two or three times higher than those obtained from RRMD-II and the CR-39 plates. It was concluded that the LET distributions obtained from RRMD-II and the CR-39 plates in the present flight experiments did not include the contribution of target-fragmented secondary heavy particles produced by low-LET particles, such as relativistic or semi-relativistic protons and helium ions, whereas RRMD-III was able to detect these secondary particles because of its low triggering level.     

Light emission from Si nanocrystals embedded in CaF2 epilayers on Si(1 1 1): Effect of rapid thermal annealing

Visible photoluminescence (PL) of nanocrystalline silicon (nc-Si) embedded in single crystal CaF₂ formed on Si(1 1 1) has been studied and the influence of ex situ rapid thermal annealing (RTA) on the surface morphology and PL spectra has been studied. It has been found that the PL intensity and uniformity was improved by RTA with appropriate temperature and short annealing time.     

Propagating beam analysis of fiber wavelength filters with a depressed-index section

A wavelength filter consisting of single-mode and few-mode fibers is investigated numerically. A simple finite-difference beam-propagation method, in which a transparent boundary condition can be imposed, is developed for circularly symmetric waveguides. After confirming the validity of the numerical method by the mode-mismatch loss, we calculate the propagating field in the fiber wavelength filter, in which interference between LP₀₁, and LP₀₂ modes occurs. To improve the filtering operation, a depressed-index fiber is employed for the few-mode fiber. The effects of the radius and refractive index of the depressed section on the transmission power are revealed and discussed. Power is suppressed to less than 0.1% at 1.3 μm, while maintaining power transmission of more than 85% at 1.55 μm. It is also found that the filtering operation shifts to higher wavelengths as the input power is increased when we choose a self-focusing nonlinear material in the depressed section.