Evidence and mechanisms of filling polymerization by plasma-induced graft polymerization

Using a plasma-induced graft polymerization technique, which is well known as a surface modification method, the grafted polymer was formed in pores of the porous material. This study examined the filling mechanism. Five thin porous films were sandwiched together, and employed as the substrate. The substrate was treated by plasma, and the change in surface tension and radical formation was measured for each sheet after the sheet was separated. The only surface on which surface-tension change was detected, was that of the sheet directly exposed to the plasma. Although plasma treatment made polymer radicals primarily on the outer surface of the sheet, the treatment also formed a few radicals inside the sheets. The radicals inside the sheets reacted with methylacrylate and grafted polymer formed in the pores. The location of grafted polymer depended on the balance between monomer diffusivity and reactivity. The grafting rate depended on which monomer solvent was used for the polymerization. Thus, the grafted membrane morphology could be controlled by varying the grating solvent composition. © 1996 John Wiley & Sons, Inc.     

Changes of electrochemical responses of the bulk solution species by thermotropic permeability of liquid crystalline membranes coated on electrodes

Liquid crystalline/polymer composite membrane-coated electrodes were prepared by casting a 1,2-dichloroethane solution of N-(4-ethoxybenzylidene)-4′-n-butylaniline (EBBA) and polycarbonate (PC) on an electrode surface. The temperature-dependence of the permeability of the EBBA/PC composite membrane on electrodes to Fe(CN)^3?₆ ion as a solution-phase redox ion was investigated by means of hydrodynamic voltammetry at a rotating disk electrode. The permeability changed with temperature over the range of the crystalline-nematic-phase transition temperature of EBBA. It is demonstrated that the observed temperature-dependence of the permeability reflects the thermotropic properties of EBBA in the EBBA/PC composite membrane. Furthermore, the dependence of the limiting current of the steady-state current-potential curves for the reduction of Fe(CN)^—₆ at the EBBA/PC composite membrane-coated electrode upon the membrane thickness, the blend ratio of EBBA and PC and the concentration of Fe(CN)^3?₆ in a bulk solution was examined in order to understand the transport process of Fe(CN)^?3₆ through the EBBA/PC composite membrane from the membrane/solution interface to the electrode/membrane interface. The transport process of Fe(CN)^3?₆ within the membrane was found to obey Fick's Law.     

Removal of phosphate by aluminum oxide hydroxide

The development and manufacture of an adsorbent to remove phosphate ion for the prevention of eutrophication in lakes are very important. The characteristics of phosphate adsorption onto aluminum oxide hydroxide were investigated to estimate the adsorption isotherms, the rate of adsorption, and the selectivity of adsorption. Phosphate was easily adsorbed onto aluminum oxide hydroxide, because of the hydroxyl groups. The adsorption of phosphate onto aluminum oxide hydroxide was influenced by pH in solution: the amount adsorbed was greatest at pH 4, ranging with pH from 2 to 9. The optimum pH for phosphate removal by aluminum oxide hydroxide is 4. The selectivity of phosphate adsorption onto aluminum oxide hydroxide was evaluated based on the amount of phosphate ion adsorbed onto aluminum oxide hydroxide from several anion complex solutions. It is phosphate that aluminum oxide hydroxide can selectively adsorb. The selectivity of phosphate onto aluminum oxide hydroxide was about 7000 times that of chloride. This result indicated that the hydroxyl groups on aluminum oxide hydroxide have selective adsorptivity for phosphate and could be used for the removal of phosphate from seawater.     

聚酚藏花红功能碳纳米管生物阳极制备及其在乙醇传感器应用

应用电化学法聚合酚藏花红（PPS）功能化的单壁碳纳米管,以其作为烟酰胺辅酶（NADH）氧化的电化学催化剂（电极）,构建基于乙醇脱氢酶的安培型乙醇生物电化学传感器.该电极于0.0 V时,对NADH具有很好的催化性能.而单体酚藏花红则由于其电位过低（-0.48 V）,不能显示催化性能.循环伏安和计时安培法测试表明：该传感器...     

电化学氧化增强金属钴卟啉的自组装研究

应用电化学方法将钴(Ⅱ)卟啉氧化成钴(Ⅲ)卟啉以增强它与4-巯基吡啶(MP)自组装膜的轴向配位作用,从而快速制备了有序钴卟啉自组装修饰电极CoTMPP/MP/Au(E).电化学石英晶体微天平(EQCM)测试证实电化学氧化对钴卟啉膜生长过程的增强作用.Ram an光谱及修饰电极电催化还原氧研究显示,该修饰电极与经过长时间浸渍法得到的CoTMPP/MP/Au(I)修饰电极具有完全相似的有序结构和性质.与直接将钴卟啉吸附在电极表面的CoTMPP/Au修饰电极相比,以巯基吡啶为桥键得到的钴卟啉修饰电极具有更好的电催化活性和稳定性.     

Sonochemically enhanced adsorption and degradation of methyl orange with activated aluminas

Removal of Methyl orange (MO), as a model contaminants, in aqueous solution by the simultaneous application of ultrasound with the addition of porous adsorbent powders is reported. Activated alumina powders in acidic form were used as an adsorbent. Results showed that MO could be degraded by ultrasonic irradiation at 130 kHz with the first order rate constant of 8x10(-4) and 5x10(-4) sec(-1), in acidic and basic conditions, respectively, without adsorbents. Adsorption rates of MO by activated alumina mainly depended on the acidity of alumina, the pH of solution and the stirring speed. At pH=4.2 with mechanical stirring without ultrasonic radiation, acidic activated alumina (0.1 g/100 ml) removed MO at about two times more rapidly than ultrasonic irradiation. In the case of simultaneous application of ultrasound irradiation and activated alumina, MO was almost removed from the solution within 10 min, which corresponded to as a rate constant of 5x10(-3) sec(-1). This kind of synergistic enhancement of removal rate with ultrasound and adsorbents should be practically useful for the elimination of contaminants in the water treatment processes. In addition, the effects of pH and coexisting chemicals in the solution were examined for the processes. Although the adsorption process was effective in some selected conditions, ultrasonic degradation was more robust in wider range of pH and coexisting chemicals. Simultaneous application of the two processes can perform complementary.     

Enhancement of sonochemical reaction of terephthalate ion by superposition of ultrasonic fields of various frequencies

The ultrasonic reactor with dual frequency was used and the effect of frequency on the fluorescence intensity of terephthalate ion was experimentally investigated in the frequency range from 176 to 635 kHz. The sonochemical reaction fields were visualized by using sonochemical luminescence of luminol solution. Compared with the fluorescence intensity of terephthalate ion for single frequency, the fluorescence intensity for dual frequency increased. The fluorescence intensity ratio of dual frequency to single frequency had maximum value when the frequency of transducer attached at the bottom wall was comparable in magnitude to that at the side wall. In the case of dual frequency, the sonochemical reaction fields became more extensive in the reactor and more intensive around the center of the reactor.     

Radical cascade reaction with 1,4-dienes and 1,4-enynes using 2-(iodomethyl)cyclopropane-1,1-dicarboxylate as a homoallyl radical precursor: one-step synthesis of bicyclo[3.3.0]octane derivatives

[reaction: see text] Radical cascade reaction with various 1,4-dienes and 1,4-enynes using dimethyl 2-(iodomethyl)cyclopropane-1,1-dicarboxylate as a homoallyl radical precursor smoothly proceeds through an iodine atom transfer mechanism to give functionalized bicyclo[3.3.0]octane derivatives in good yields.     

Podophyllotoxin aza-analogue, a novel DNA topoisomerase II inhibitor

The pendant E-ring moiety of the podophyllotoxin aza-analogue 1 that is a potent inhibitor of microtubule assembly was modified in order to acquire inhibitory activity of DNA topoisomerase II. The monophenolic analogue 2 did not exhibit human topoisomerase II inhibition, while the ortho-quinone 3 that was obtained by oxidation of 2 inhibited its catalytic activity (decatenation) in a dose-dependent manner and stimulated double strand DNA breaks in supercoiled circular plasmid DNA, resulting in the production of linear DNA. These results showed that the topoisomerase II inhibition of the ortho-quinone 3 is due to stabilization of the topoisomerase II-DNA covalent binary complex. On the other hand, the ortho-quinone 3 did not inhibit the relaxation process of supercoiled DNA by topoisomerase I at concentrations up to 400 microM, nor was intercalation observed in unwinding measurements of 3. Therefore, the ortho-quinone 3 was shown to be a novel nonintercalative topoisomerase II specific inhibitor that stabilizes the cleavable complex. The present results suggest that the 4'-free hydroxyl group on the E-ring and the sugar moiety on the C-ring are not a prerequisite for topoisomerase II inhibition by podophyllotoxin derivatives.     

Light emission from Si nanocrystals embedded in CaF2 epilayers on Si(1 1 1): Effect of rapid thermal annealing

Visible photoluminescence (PL) of nanocrystalline silicon (nc-Si) embedded in single crystal CaF₂ formed on Si(1 1 1) has been studied and the influence of ex situ rapid thermal annealing (RTA) on the surface morphology and PL spectra has been studied. It has been found that the PL intensity and uniformity was improved by RTA with appropriate temperature and short annealing time.