Synthesis of poly (ether-sulfone-amide)s by palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structure,aromatic diamines,and carbon monoxide

A general method for the preparation of aromatic poly (ether-sulfone-amide)s has been developed. Polymerization is based on the palladium-catalyzed polycondensation of aromatic dibromides containing ether sulfone structural units, aromatic diamines, and carbon monoxide. Reactions were carried out in N, N-dimethylacetamide (DMAc) in the presence of palladium catalyst, triphenylphosphine, and 1,8-diazabicyclo [5,4,0]–7–undecene (DBU), and gave a series of poly (ether-sulfone-amide)s with inherent viscosities up to 0.86 dL/g under mild conditions. The polymers were quite soluble in strong acids, dipolar aprotic solvents, and pyridine. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 470°C in air. The glass transition temperatures of the polymers were around 230°C, which are higher than those of poly (ether-sulfone) analogues. These polymers also showed the good tensile strengths and tensile modulus. © 1994 John Wiley & Sons, Inc.     

Synthesis and toxicity assay of ceramic nanophosphors for bioimaging with near-infrared excitation

Yttrium hydroxyl carbonate (Y(OH)CO₃) precursors were synthesized by the homogeneous co-precipitation method in the presence of polyacrylic acid (PAAc). Resultant precursor particle size is about 15–20 nm with narrow size distribution whereas the particle size is smaller than those acquired by the conventional homogeneous precipitation method. Effective decrease of Y(OH)CO₃ particle size was found to be higher for the presence of weak polyanionic ionomer such as PAAc than the presence of strong polyanionic ionomer such as sodium polystyrene sulfonate (PSS). It was observed that the morphology and size of the precursors are almost unchanged after the calcination process. Er³⁺ doped Y₂O₃ nanoparticles were synthesized by PAAc assisted homogeneous co-precipitation method showed bright green (550 nm) and red (660 nm) upconversion (UC) as well as near-infrared (NIR) fluorescence (1550 nm) under 980-nm excitation. UC and NIR fluorescence bioimaging and in-vitro cytotoxicity assay of Er³⁺ doped Y₂O₃ nanoparticles were successfully attempted with commercially available macrophages and B-cell hybridomas. Cellular uptake of nanoparticles is evidenced from bright field, UC and NIR fluorescence images of macrophages.     

Nonclassical Urea Oligomers. VII. Binding Specificity of Carbanilido-ethylenimine Oligomer: Absorption Behavior in Suspension

Polyester elastomers were prepared by block copolymerization of dimethyl terephthalate (DMT), butanediol (BDO), and polytetramethylene glycol (PTMG). Polyester from DMT and butanediol forms a high-melting hard segment in block copolyester to prevent undue chain slippage when fibers are stretched. High elongation was provided by soft segment which consisted of condensation product from DMT and PTMG.

Experiments were carried out to determine the effect of composition variables on the properties of these elastomers, such as glass transition temperature, elongation at break, tenacity, and elastic recovery. The study on molecular characteristics of the elastic polyester showed that a leather-like region exists between glassy and rubbery regions. These elastomers were melt-spun to give elastic fibers which are competitive with commercially available Spandex-type fibers.     

Synthesis of Star-Shaped Polymers via Coordination of Bipyridyl-Terminated Polyoxyethylene with Metal Ions

Abstract

This paper describes the synthesis of various star-shaped polymers by means of complexation of bipyridyl-terminated polyoxyethylene with Ru(II) ion. Three kinds of bipyridyl-terminated polyoxyethylenes of different molecular weights were prepared from the corresponding polyoxyethylene monomethyl ethers with narrow molecular weight distributions. Bipyridyl was found to be introduced quantitatively at the end of the polymers based on the results of UV spectra. The formation of a star-shaped polymer was carried out by the reaction of RuCl₃ with three equivalents of bipyridyl-terminated polyoxyethylene. The UV spectrum of the star-shaped polymer obtained supported the formation of a typical Ru(II) tris(bipyridyl) complex. From the results of GPC, the star-shaped polymer obtained had a higher molecular weight than the pre-polymer and showed a narrow molecular weight distribution. In the case of a Ni(II) or a Co(II) complex, however, the star-shaped polymer was found to be dissociated into three linear prepolymers under the conditions of GPC measurement.     

Polymerization of Cyclic Ethers

Abstract

In the present series of studies on the cationic polymerization of cyclic ethers, the reactivities of cyclic ethers were quantified and the effect of the catalyst upon the polymerization kinetics was revealed. These kinetic analyses were successfully performed by means of our “phenoxyl end-capping method”. The change of the reactivity by the ring size of the monomer was interestingly demonstrated. In addition, it is emphasized that the frequency factor as well as the activation energy influence the rate constant of propagation. As to the effect of catalyst upon the polymerization kinetics, the most important conclusion is that the rate constant of propagation changes very little according to the changes of the catalyst components. Variation of the conversion rate by a change of catalyst is due to differences in the rates of the initiation and the termination reactions.     

Synthesis and Polymerization of Spiro Oxyphosphoranes

Novel methods of synthesis of spiro acyloxyphosphoranes are described emphasizing the significance of the first isolated instance of these new species. Then, the no-catalyst alternating copolymerizations of the combinations of cyclic phosphorus(III) compounds (serving as nucleophilic monomer, M_N) with acrylic acid derivatives and with α-keto acids (electrophilic monomer, M_E) are mentioned. These copolymerizations proceed without added initiator. Spiro oxyphosphoranes play an important role in the copolymerization scheme in the equilibrium with the ⁺M_N - M_E ^? zwitterion, the key intermediate of the copolymerization. Finally, new reactions of spiro acyloxyphosphoranes with nucleophiles, alcoholysis and aminolysis polymerizations are presented.     

Ion-Selective Electrodes Based on Bilayer Film Coating

The electrode characteristics of ion-selective electrodes (ISEs) for K⁺, Na⁺, NH₄ ⁺, and Ca²⁺ based on bilayer film coatings, where the inner layer films are electroactive electropolymerized ones and the outer layer films are composed of conventional ion-sensitive materials, have been examined. These ISEs of the coated-wire electrode type have no conventional internal reference solution and reference electrode, but the inner films may be considered to function as the “internal standard solution.” The ion selectivity coefficients and the activity range showing Nernstian response were almost comparable to those of conventional liquid-membrane electrodes. The bilayer-coated ISEs showed insensitivity to O₂ and CO₂, long-term stability, and little drift. It was also found that the electrode performance is practically unchanged after sterilization in an autoclave. The results demonstrate that the bilayer-coated ISEs examined are promising for the determination of K⁺, Na⁺, NH₄ ⁺, or Ca²⁺ activity in biological and environmental systems.     

New Preparation of Cyclic Acyloxyphosphorane by Reaction of Glyoxylic Acid with Phosphorus(III) Compounds

We have recently found that the reaction of α-keto acids (1) with phosphorus (III) compounds (3) yielded cyclic acyloxyphosphoranes(C-AOPs, 4), a new class of pentacovalent phosphorus species having a P-OC(O) group.^{1, 2)} The present paper deals with a new reaction of glyoxylic acid (2) with 3 to give C-AOPs (5) having no substituent at the C-3 position. 1 is an α-keto acid whereas 2 can be taken as an α-formyl acid. Although it is well known in the field of organic chemistry that the formyl group often behaves differently from a keto group, the reaction of 2 with 3 provides an example in which both groups behave in a similar manner.